Remote Angel IR-01 User manual

wner’s Manual
Touching LCD
8 in 1 Learning
Universal Remote
SUH-9000 ( Backlit)
Printing in Taiwan

Thank you for purchasing your Remote Angel Touching
LCD 8 in 1 teaming Universal Remote Control. Remote Angel
replaces the infrared remote controls for up to eight
audio/video components with each individual component
having a visual display. In complex multibrand
audio/video/home theater applications the macro function
allows one to program all components to turn on or off in
sequence, or to even turn on a component and start your
favorite title. Remote Angel eliminates having numerous
remotes at your table, confusion as to which one to use and
fumbling with switches. Teaching the Remote Angel remote
commands is simple but it does require understanding
clearly the instructions that follow. Please read them
thoroughly.
Enjoy!

.
.
.
.
.
.
.
.
.
.
.
.
.
.
Features........
................................ ...................................... 3
Battery Installation........................
... .....................................
3
Operation Notes...................................................................
4
Name and Function of Each Part.......................................
5
Component Select Area......................................................
7
Learning Other Remote‘s Commands
............................ 9
Troubleshooting Learning Errors....................................
11
Using Remote Angel..............................................................
12
DeleteKeyFunction..................................................
.... .......
13
Learning Macros..............................
... ............................ 14
Reset - Alli MemoryClear.............. ...................................
16
Care & Maintenance...................
.... ..................................
17
Specifications......................................... .............................
18
Drawings of Model Screen Display....................................
19
Extra LargeTouch Liquid Crystal Display
8 Different Visual Panels for Ease of Use
Learns 8 Different Infrared Rcmotes
Macro - Programs Series of Steps
Back Up Battery Prevents Memory L OSS
Easy - Learning For All Remotes
Back light function enables you to operate you electronic components
easily while its Light Auto-detection senses darkness. (SUR-9000)
Bark light function starts automatically with a touching on the front
panel and shut off automatically after 5 seconds. (SUR-9000)
Slide cover off at top rear of unit in the direction of the arrow.
Insert 4 NEW “AAA” alkaline batteries or equivalent
Caution., Make sure that correct polarity is used! Negative (-) side to
battery to spring! Incorrect installation mav cause damage or leaks!
Slide cover back on
Average ALKALINE BATTERY life is approximately 6 months for IR-01
and 2-3 months for SUR-9000. If you are not using the remote for extended
periods of time please remove batteries and store them in a cool dry place.
Remote Angel can retain its memories without batteries for up to 3 years!
Always dispose of all batteries in an environmentally friendly way.
2

l Do not drop objects on the touch screen or remote
l Avoid contact with sharp objects and liquids
0 Keep unit away from extreme temperature
l Do not disassemble the unit
l In high intensity light the learning capability of the remote may be
impaired.
4

Status Indicators Area:
How the Remote Angel Works
l 1. OK - Function correctly performed or learned
l 2. ERROR - Error in learning or unprogrammed key
l 3. DELETE - Remote is in delete memory mode
l 8. LEARN - Remote is in leammg mode
l 9. BATLOW - Battery is low
l 10. ,@, - Keys buzz when touched
Operation Keys Area:
0 5. RESET - Reset remote and clear all memories
0 4. DELETE - Clear a single key’s memory
l 1l. LEARN - Learn a key’s memory
l 1,2 MACRO - Learn Macro
6. Control Keys Area:
Perform or learn individual functions as programmed by user for each key
7. Component Select Area:
Choose component to be controlled or programmed
13. FUNC. Switch.
ON/OFF Operation Keys (RESET, DELETE, LEARN, MACRO), normal
please turn off the FUNC. Switch.
NOTE:
If you forget turn off the switch, when you mistakenly touch the
key “RESET” at any time for more then 2 seconds all programmimg
will be erased!!!
Before using the Z?e +, it will help to understand how it works.
The &IO& &I& has 28 programmable visual keys for each individual
component. You can teach any command key any function in each of the
eight device indicators: TV, VCR, CD, LD, AMP, TAPE/TUNER, SEL1,
SEL2. You can teach any command into any component control button i.e.
amp volume into TV area The
names of buttons and component devices
are
only for your reference and as a reminder. Please note that the remote
can only learn infrared commands. Ultrasonic and UHF
rcmote controls are
not compatible with the ;acac~ ,+G+ ~ Also some infrared remote controls
use encoding methods which the w #+cannot learn.
Press the corresponding key of the component you want to control in
this area. The
~usb R+ will highlight the key you have pressed with the
component’s diagram and change the look of the operation keys to show
commands that one normally has programmed for that component. To
control a different component just touch the corresponding component
select key.
Component Key Extended Functions
Buzz ON/OFF - after selecting a certain component if that component’s
button is touched again it toggles the buzz sound on or off for all keys.
The
f10 symbol appears or disappears just above the POWER key.
Standard - Simple Keyboard Display Toggle - Touch the component
you wish to edit for 2 seconds, the screen display will be transferredto
a simple keyboard display
- at this time release the key. You are now
in the simple display mode fur this particular component
- where only
basic functions of each component are displayed. If you wish to return
to a standard display, repeat.
6

Standard Keyboard Display Edit - Touch the key of the component
display you wish to change, and hold it for approximately 6 seconds
when you will hear a series of 3 buzzes, at this time release your finger.
You are now in the edit screen mode. When you release your finger you
will notice that the Component Select Area is flashing and the
component you are editing remains highlighted. At this
time you can
touch any of the control keys and when you do this the key will toggle
on or off. i.e. you can delete the keys you do not want displayed if you
are not using them - and later add them back if you want them to be
displayed. When you are finished editing the display for the particular
component you may press the component key you are editing and the
new display settings are memorized with a 3 buzz
confirmation.
1. Turn on the FUNC. Switch, then touches the corresponding button for
the component you wish to program from the Component
Select Area.
Touch the LEARN key for 2 seconds and the LEARN status indicator
will appear at the top of the remote showing that the remote is now in
learning mode.
Align the front end of the component’s remote towards, the back
end(receiver) of the ??ti ~*gd, approximately 3 to 5 cm apart.
SEL 1 - SEL 2 Component Type Select - When you are editing the
display in the SELl or SEL2 area you can configure each of these
displays to resemble the remote control of either a TV, VCR,
AMP,
CD. LD or TAPE/TUNER. To do this as soon as you enter into the
standard display edit function you touch the flashing display of the
component you wish the SEL1or
SEL2 to look like and the display
now displays the buttons of whichever component type you have chosen.
You can now proceed to delete keys you will not be needing in this
display and then save this new configuration by touching either the
corresponding SELl or SEL2 when you have finished. A 3 buzz
confirms completion.
% The edit display will return to be standard key display while
24 A*gd with new batteries.
Gently touch the operation key on the w A+ you wish to program
and hold, then press the key on the remote of the component’s remote
you want to learn from.
When you press the button of the component’s remote the learn symbol
flashes to indicate the learning process. When the OK symbol is
displayed the key has been learned and both keys on both remotes may
be released. If the ERROR display appears an error has occurring in
the learning process and step 4 must he repeated. See Learning
Errors
section if problems persist.
If OK is displayed you may proceed to learn other keys for the same
component by repeating the process in Steps 4
& 5. If you wish to
learn keys for a different component you must first touch the
corresponding key for the component for which you wish to program on
the
;purk H$&
End Learning
When you have fished programming the various keys on your
;pusic &+ press the LEARN key and the LEARN symbol will go out.
Then turn off FUNC. Switch. You may now proceed and use your ;puotc
#+.
Note: In the LEARN mode if no key is pressed for over 2 minutes,
LEARN mode ends automatically.
9

Trouble Shooting Learning Errors
FUNC.
I
When ERROR appears at the end of the learning process an error has
occurred. Release all keys and repeat steps 3 to 6 in the learning remote
commands section. If error appears after several attempts there may be a few
reasons:
%i: Memory is full - see following section
A-? Alignment of the two remotes is not correct
J?? You may be holding the button of the component’s remote too long.
Try pressing this button for a shorter period of time (about 1 se cond)
while still touching the corresponding button on the
;puracC A#.
If the sign OK was light, it means the datas of the old remote controller
were acceptable. However, the “Repeat” function of a few keys might be
invalid after learning.
*X.%me keys will send out “REPEAT” code automatically:
When you operate M Aa& and find a number you pressed showing
double numbers on the component you are controlling, or when you adjust
stations and volume and find the component skipping
l-2 more spaces
automatically, you may try item 3 for settlement.
#It is normal if you must learn each key twice, because some ;E%rocc ~4+
code is longer then usual.
tlF: The component’s remote you are trying to learn may be a remote that the
U ~448# cannot learn.
In the rare case “‘ERROR” will not disappear, remove a battery and wait
a minute before replacing.
This will re-boot the %I& +a! much like a
computer. All previously learned functions will be maintained in memory
but the distinct layout of the key editing function you may have programmed
may be erased
Memory Full
When ERROR flashes during all learnin g processes, 311 of the memory of
the unit has been used. This should only happen when quite a few remotes
and/or macros have been learned. If you would li
ke to program a key that
you need you may use the Delete Key Function to delete a less important key
first. This will
allow you to proceed with learning.
10
11

After you have taught the h w all functions required to control the
components of your system you may proceed to use it as your main remote.
1. Touch the component you wish to control from the Component Select Area.
2. Touch the key in the Operation Key Area you wish to use.
The OK indicator appears to show that there is no error.
NOTES:
:% The ERROR indicator appears when the key you touched is either not
programmed or programmed incorrectly. Return to the programming area
and re-learn the key so that you may use it.
% REC key works only after it has been touched for 2 seconds. This is done
as a safety precaution.
-X BATLOW indicates batteries are low and need to be replaced.
There is no difference between SUR-9000 and IR-01 except that SUR-
9000 is available with Back Light function. That is why SUR-9000 enables
you to operate your electronic component easily even if you are in the dark. It
is a fascinating design for users of projection equipment.
The operation of SWR-9000
, which has an auto Back Light function , and
that of
IR-01 are the same. The Back Light can be switched ON/OFF
automatically because SUR-9000 has auto-detect lighting function. In the dark,
you only need to press any key , and the Back Light will light up the screen for
about 5 seconds and then shut off automatically. If you
are in continuous
operation, the Back Light will shut off automatically 5 seconds after you press
the last key.
When the
memory is full the “ERROR” indicator appears during learning.
If there are any unnecessary keys you must delete them.
1. Turn on the FUNC. Switch, then touches the component in the
component select area you wish to delete a key for.
2. Touch DELETE key for about 2 seconds and release. You are now in
the delete
key mode.
3. DELETE indicator flashes quickly
4. Touch the key you wish to delete and it’s memory is automatically
deleted.
5. DELETE indicator disappears when either a key is touched or
DELETE button is pressed.
This exits the delete key mode.
6. To dclctc any other keys for the same component repeat steps 2 to 5
For another component repeat steps I to 5.
7. When you don’t delete other key, please
turn off the FUNC. Switch.
12

The MACRO mode allows one to learn up to 10 steps within 1 button.
If
your system includes more than one component you will find yourself
constantly fumbling to turn on the TV, VCR, LD and an AMP. The Macro
function of the
&WCC #+
allows you to do all this just by touching the
MACRO key and then any 1 key you have programmed with ail the
functions you wish to perform.
1. Turn on the FUNC. Switch, then touches LEARN key for 2 seconds and
the LEARN indicator will appear.
2. Touch MACRO and you are now in Macro mode.
3. Touch the component you wish to set up a macro in, from the component
select area.
4. Touch a key that has not been previously programmed. This will be the
key that initiates the MACRO
5. Now touch the first key in the MACRO i.e. TV-POWER, then choose
the next component in the component select area you wish the turn on
and press this key and so on up to ten separate keys.
6. Touch MACRO key to finish the complex-operation function
7. Touch LEARN again to end the macro learning function and the
LEARN indicator disappears.
8. Turn off the FUNC. Switch.
Macro Use
0
“,$$ &-----
t
Touch the MACRO key and then the key that you learned the macro in
and the &W&Z && will perform all the steps you programmed, such as
turn on, etc. Remember the preceding section is just and example of the
macro learning capability of the ;eoro*r ti+
One can use it to turn off
components, mute volumes, or up to any 10 steps you would normally
touch sequentially.
I FUNC.
0
,

Turn on the FUNC. Switch, then pressing the RESET key for over 2
Your 8 in 1 Z& H+J is a superiorly designed and crafted unit that will
seconds clears all memories and macros programmed in the ;puo*r +.
continue to give you years of use if treated with care.
We suggest:
FUNC.
S always keep dry - wipe any spills immediately
TF avoid extreme temperatures - extreme cold causes condensation and
water build up in the unit high heat will plainly melt it!
$$ dropping will crack the unit or the display
$F avoid dust, dirt and sharp objects - they will scratch the unit and the
display
3 wipe the %?d A+ with a mild window cleaner and soft cloth
taking care not to scratch the display.
Z keep the unit away from foods, harsh chemical, cleaning solvents
or detergents.
# if you are having problems with the unit please return it for service.
Tampering voids the warranty and there really isn’t much you can
fix in there anyway!
16 17

Battery:
Battery Consumption:
Display:
Dimensions:
Weight:
Acceptable Frequency:
Receive Distance:
IR Viewing Angle:
Remote Capability:
Display Types:
Back-Up Battery:
Attachment:
4
- AAA Size ALKALlNE (SUM-4)
Use: 35 mA ( IR-01 )
60 mA ( SUR-9000 )
Standby:
50 PA
Touch Liquid Crystal Display
Length
180mm
Width 82mm
Height
28mm
200g ( Without Batteries )
230g ( Without Batteries )
21.7K - 62.5K Hz
8- 10 Meter
20 1/2 = 45
8 Remote x 28 keys
TV, VCR, CD, LD, AMP,
TAPE/TUNER,
SEL1, SEL2
R2025
3.0V 150mA/hr
Owner's Manual
18
8in1
Remote controller
8inl
Remote controller
1
9
8inL
Remote controller
827-d
Remote controller

8inL
Remote controller
L
/
8inL
Remote controller
8inl
Remote controller
8in.L
Remote controller