Rexgear HYDRA-1 Instruction manual

HYDRA-1
Bitcoin Machine Case

1
Bitcoin Machine case
HYDRA-1
Image Part's Name Qty Function/Component
Screw-A 26 PSU / VGA Card
Screw-B 15 Motherboard / 3.5” HDD
Screw-C 4 2.5” HDD / SSD
Nut Setter
Screw-F 14
Handles 2
Fan Grills 3Finger Guard
Cable Ties
Fans
Screw-E Handles
Carrying Case
10
Stand Off
Cable Management

2
Bitcoin Machine case
HYDRA-1
VGA Holder
M/B Plate
Fan Holder
Bottom Plate
Left Cover
Left power Holder Right Cover
Right power Holder
Product Diagram

3
Bitcoin Machine case
HYDRA-1
1. Install the handles

4
HYDRA-1
Bitcoin Machine case
2.Install the fans
We recommend high speed server fans with at least 4000 RPM and 150 CFM.
Generic case fans may not provide adequate static pressure for server environment.

5
Bitcoin Machine case HYDRA-1
3.Install the power supplies
4. Install the motherboard
Stand offs are pre-installed in the chassis

6
Bitcoin Machine case
HYDRA-1
5.Install the HDD / SSD
6.Install the Add-on Cards
This case is optimized for 8 dual
slot reference cards with standard
PCB/cooler up to 300 mm length
and 115 mm height.

HYDRA-1
s[email protected]