Rippton Lure Mate User manual

USER MANUAL
Lure Mate Fishing Tracker
Version 1.2E
2021/08/27
Preface

Thank you for purchasing the Lure Mate Fishing Tracker.
Please make sure you have read through this manual
before using your Lure Mate to start a wonderful fishing
trip.
Statement
The policy is one of continuous improvements and we
reserve the right to change product specifications without
prior notice. Illustrations are for guidance purposes only.
1. Specifications
Product Name
Lure Mate Fishing Tracker
Net Weight
12g
Product Dimensions
36*36*24mm
Packaging Dimensions
58*58*30mm
Battery Type
button battery (CR2032)

Voltage
3.0V
Bluetooth Module
4.0
Working Range
10m
Working Temperature
-10℃~45℃
Working Environment
Bluetooth connection
2. Instructions
2.1 RIPPTON APP Downloading
Install ‘RIPPTON’ App in your mobile devices by scanning the QR
code below or searching ‘RIPPTON’ in Samsung Galaxy Apps/Google
Play/Huawei App Store or IOS App Store.
Note: System requirements
Ios 9.0+, Android 8.0+ (device compatibility may be subject to change)
2.2 Device Connection Steps
Switch your mobile device on Bluetooth mode.
Make sure your Lure Mate is turned on and in range.
Follow steps below to complete device connection.

Step1: Enter ‘RIPPTON’ app and tap
‘Device’; slide to find ‘Lure Mate’ and tap
‘Enter’.
Step2: Tap the Bluetooth icon on top
right corner.

Step3: Tap ‘Add’.
Step4: Tap ‘Find My Device’ and
simultaneously press Lure Mate once.
Step
5
:
Lure
M
ate
connected.
Step
6
:
Now your Lure
M
ate is ready to
go.

Note: Once your Lure Mate has been successfully connected, it remains in the
Bluetooth device list, so you can simply reconnect it by tapping it.

3. Function Overview
3.1 Start Your Trip
Tap “Start Trip” button to establish a record for your fishing
trip.

Press the button of Lure Mate once to record your casting without
any catch of fish.
Double press the button of Lure Mate to record the number of you
catches and post the relevant picture.
3.2 Add Waypoint
By tapping ‘ ’, you can add and sort waypoints.
3.3 Logbook
Tap ‘ ’to view your past fishing trips, including weather, hydrological
information, historical records of casts, catch rate and etc.
3.4 Data Sync
Tap “ ”to synchronize data. There will be a prompt of “success”,
which means all local data has been uploaded to the server. By this, you can
freely view all history records on any new devices by login your Rippton ID.
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.