Riva WMB-3000 User manual

WMB-3000 Installation Guide
www.rivatech.de
1. Contents
2. Installation
1. Insert plastic anchors (4 pcs)
2. Put the wall mount bracket
on the wall along with each
corresponding hole and fix it
on the wall by tightening
tapping screws clockwise.
3. Put the wall mount gasket
around the wall mount
bracket.

WMB-3000 Installation Guide
www.rivatech.de
4. Fix M4x10L Pan Machine Screw
into the designated holes by
tightening clockwise (refer to the
picture left) and mount it tightly on
the wall mount bracket (refer to the
picture above.
5. Fix the wall bracket on the wall mount
bracket by inserting and tightening
M4x10L Washer machine screws
into the four designated holes. Please
don’t forget to put the O-ring gasket
when tightening the screws.

WMB-3000 Installation Guide
www.rivatech.de
3. Combine with cameras
This guide illustrates how to assemble cameras with the ceiling mount bracket
(WMB-3000).
Check the letter of the alphabet assigned to each adapter and tighten the screws
in the corresponding holes to assemble cameras.
A –A –A = RC3100, RC3500, RC2100, RC2102HD, RC3102HD, RC3502HD