Rivers Edge Treestands RE619 User manual

Operator's Manual
One-Man
Ladder Stands
OMRELD004
Revised 02/25/11
© 2011 RETI
All Rights Reserved.
Get parts online at
www.HuntRiversEdge.com
SPIN SHOT
Model RE623
INCLUDES MODEL #'s:
RE619, 20' Lumberjack Extreme Ladder
RE607, 22' Timbershot Extreme Ladder
RE623, 17' Spin Shot Ladder
RE624, 15' Opening Day Ladder
LUMBERJACK EXTRME
Model RE619

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
2
Operator's Manual
Rivers Edge One-Man Ladder Stands
WARRANTY
Rivers Edge Treestands, Inc., oers a lifetime warranty to be free from defects in materials and workmanship. This warranty applies to the original owner with a proof of
purchase. All items attached to our stands (seat, strap, rope, wood, etc.) that are degradable are warranted for a period of one year. There is no warranty on paint. This
warranty applies to products that are not modied, abused or misused in a manner that deviates from the products intended usage. Rivers Edge Treestands oers no
other warranty expressed or implied nor is to be held liable for any damage that may result from any defect in a treestand manufactured by them. Warranty work must
be sent directly to Rivers Edge Treestands and performed by them. To obtain warranty service and/or replacement instructions, you must have prior approval from
Rivers Edge Treestands before shipping your package to us by calling our customer service department at 800-450-EDGE (3343) or by writing to: Rivers Edge
Treestands, Inc., P.O. Box 755, 1690 Elm Street, Cumberland, WI 54829 for a return material authorization number (RMA#). All items must be shipped prepaid.
Rivers Edge Treestands will at no charge, repair or replace, at their discretion, any defective stand which falls under the conditions stated above. Rivers Edge Treestands
retains the right to change models, specications and price without notice.
NOTE: You must always use the provided full body harness (fall arrest system) that meets TMA standards while using this product!
This equipment has been manufactured under strict quality guidelines. As with any equipment of this type, full understanding of the instructions and its use is mandatory
for the safety of its user. Rivers Edge Treestands, Inc., is not responsible for any damages or injuries sustained due to improper use or modication of any of its products,
or due to any use which deviates from the products intended usage. The manufacturer also is not responsible for any injuries sustained due to failure to adhere to the
instructions for use. Any misunderstanding of its operation should be directed to manufacturer prior to its use.
ALL RIVERS EDGE TREESTANDS COME WITH A FULL BODY HARNESS FALL ARREST SYSTEM THAT MEETS TMA STANDARDS. It is the owner's responsibility to
inspect the product regularly for damage that could inhibit the ultimate safety of the product. Failure to use or improper use of the provided Full Body Harness (Fall Arrest
System) that meetsTMA standards may result in serious injury or death. ALWAYS wear the provided Full Body Harness (Fall Arrest System) that meetsTMA standards while
using this product.
Owner is responsible to check product eld rating and must never exceed maximum weight rating stated. Rivers Edge Treestands, Inc., is not responsible for any
malfunction due to normal wear and tear and/or damage caused by improper use, improper maintenance or accidents. This product if used safely as intended, will give
you years of trouble free service. We hope you will enjoy the quality of our products for years to come, and have a safe hunt.
For replacement parts, phone 800-450-EDGE (3343) or go online to www.HuntRiversEdge.com.
CONTENTS
Introduction/Warranty .....................................................................................................................................................................................................................................2
Warnings................................................................................................................................................................................................................................................................3
Full Body Harness (Fall Arrest System)....................................................................................................................................................................................................4-9
Inspection and Maintenance ...................................................................................................................................................................................................................... 10
Assembly/Parts Explosion/Parts List (RE619) ..................................................................................................................................................................................11-15
Assembly/Parts Explosion/Parts List (RE607) ..................................................................................................................................................................................16-21
Assembly/Parts Explosion/Parts List (RE623) ..................................................................................................................................................................................22-27
Assembly/Parts Explosion/Parts List (RE624) ..................................................................................................................................................................................28-36
Set-Up and Use Instructions..................................................................................................................................................................................................................37-40
Bolt Guide .......................................................................................................................................................................................................................................................... 41
Rivers Edge Treestands are engineered with you the hunter in mind. We appreciate your purchase of one of our world class treestands. Follow
these few simple instructions and your stand will provide you many years of trouble-free pleasure. Instructions should be kept in a safe place and
reviewed at least annually.
If for any reason you have a problem with your product, DO NOT return to the retailer, contact the Rivers Edge customer service department at
800-450-EDGE (3343) for assistance.

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 3
Operator's Manual
Rivers Edge One-Man Ladder Stands
WARNINGS
WARNING
DO NOT USE THIS PRODUCT UNTIL YOU HAVE WATCHED
THE INCLUDED TREESTAND SAFETY DVD, UNDERSTAND IT
AND PRACTICED THE TECHNIQUES FOR SAFE HUNTING DIS
CUSSED IN THIS DVD.
YOU MUST ALWAYS USE THE PROVIDED FULL BODY HAR
NESS FALL ARREST SYSTEM THAT MEETS TMA STAN
DARDS WHILE USING THIS PRODUCT. SINGLE SAFETY BELTS
AND CHEST HARNESSES ARE NO LONGER ALLOWED AND
SHOULD NEVER BE USED.
IF YOU ARE NOT WEARING A FULL BODY HARNESS THAT
IS PROTECTING YOU FROM A FALL, DO NOT LEAVE THE
GROUND.
FAILURE TO USE OR IMPROPER USE OF THE PROVIDED FULL
BODY HARNESS FALL ARREST SYSTEM THAT MEETS TMA
STANDARDS MAY RESULT IN SERIOUS INJURY OR DEATH! READ,
UNDERSTAND AND FOLLOW ALL INSTRUCTIONS. IF ANY IN
STRUCTIONS ARE NOT UNDERSTOOD OR IFYOU HAVE A PARTS
ISSUE CALL 800450EDGE 3343 BEFORE USING.
READ, UNDERSTAND AND FOLLOW ALL ASSEMBLY, INSPEC
TION, MAINTENANCE, FULL BODY HARNESS FALL ARREST
SYSTEM & USE INSTRUCTIONS PROVIDED BEFORE EACH
USE. FAILURE TO FOLLOW ALL WARNINGS AND INSTRUC
TIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
READ AND PERFORM ALL INSPECTION AND MAINTENANCE
TASKS BEFORE EACH AND EVERY USE REPLACE ANY QUES
TIONABLE COMPONENTS IMMEDIATELY WITH RIVERS EDGE
ORIGINAL REPLACEMENT PARTS. DO NOT LEAVE YOUR
STAND OUTDOORS  REMOVE AFTER EACH USE AND STORE
INDOORS!
INSTRUCTIONS SHOULD BE KEPT IN A SAFE PLACE AND RE
VIEWED AT LEAST ANNUALLY.
DOUBLE CHECK ASSEMBLY STEPS TO BE CERTAIN YOU HAVE
CORRECTLY ASSEMBLED THIS PRODUCT.
DO NOT CRUSH TUBING WHEN TIGHTENING BOLT ASSEM
BLIES! IDENTIFY AND FAMILIARIZE YOURSELF WITH ALL
PARTS BEFORE YOU START. A BOLT IDENTIFICATION CHART
CAN BE FOUND IN THE BACK.
DO NOT EXCEED THE TOTAL FIELD RATING 300 LBS.
NEVER USE ANY PRODUCT THAT HAS NOT BEEN MAIN
TAINED OR INSPECTED PROPERLY  YOUR LIFE DEPENDS
ON IT!
WHEN HUNTING FROM A TREESTAND, FALLS CAN OCCUR
ANY TIME AFTER LEAVING THE GROUND CAUSING INJURY
OR DEATH.
NEVER ATTACH TO A DEAD, ODDSHAPED, LEANING, DIS
EASED, LOOSEBARKED TREE OR UTILITY POLES.
WARNING
REPLACE ANY AND ALL TREESTAND STRAPS EVERY TWO
YEARS OR WHEN ANY SIGNS OF DAMAGE OR WEAR EXIST
BEFORE.
SOME MODELS INCLUDE A FOOTREST, WHICH IS DESIGNED
AS A FOOTREST ONLY. NEVER STAND ON THE FOOTREST.
BE SURE TO RAISE AND LOWER YOUR WEAPON AND GEAR
WITH A HAUL LINE. GUN BARREL END AND ARROW TIPS
MUST BE POINTED DOWN AWAY FROM YOU.
BE SURE SEAT PAD AND/OR BUCKLES ARE SECURELY AND
CORRECTLY ATTACHED TO PREVENT ACCIDENTAL REMOVAL.
WARNING
ALL ASSEMBLY MUST BE DONE BY THREE PEOPLE IN THIS OR
DER AT GROUND LEVEL BEFORE UPRIGHTING.
NEVER EXCEED THE MAXIMUM STATED USE HEIGHT.
CHECK THE GROUND UNDER STAND TO MAKE SURE IT IS
FIRM AND LEVEL. SLOPED GROUND OR UNEVEN SURFACE
ONE SIDE ON A ROCK CAN CAUSE YOUR LADDER TO TILT
OR SHIFT OFF THE TREE AS YOU CLIMB.
CHECK EVERY LADDER SECTION CONNECTION EVERY TIME
YOU USE THE STAND BEFORE YOU LEAVE THE GROUND.
IF LADDER SECTIONS ARE SEPARATING, DO NOT USE THE
STAND.
LUBRICATION IS HIGHLY RECOMMENDED AT SLIDE TO
GETHER POINTS OF EACH SECTION TO PREVENT BINDING.
SECTIONS ARE STACKED TOGETHER BY SLIDING SECTIONS
TOGETHER, INSIDE OF EACH OTHER. SECTIONS ARE THEN SE
CUREDWITH SPRING LOCK PINS ORWING NUTS/WING BOLTS
BE SURE ALL LADDER SECTIONS ARE SEATED COMPLETELY
TOGETHER ON SWEDGED OR POCKETED ENDS OF PIPE.
STABILIZER BAR MUST ALWAYS BE CORRECTLY AND SECURELY
ATTACHED TO LADDER AND TREE BEFORE CLIMBING LADDER.
SOME MODELS INCLUDE A MULTIPIECE STABILIZER BAR
SYSTEM. BE SURE SPRING LOCK PIN GOES THROUGH BOTH
THE EXTENSION TUBE AND THE STABILIZER BAR.
BE CERTAIN SPRING LOCK PINS ARE LATCHED SECURELY TO
PREVENT ACCIDENTAL REMOVAL.
BE SURE YOUR DOUBLE KNOTS ARE ALL SECURE ON ALL
ROPE CONNECTIONS.
NEVER ASCEND OR DESCEND LADDER WITHOUT TIEOFF
ROPES SECURELY HOLDING LADDER TO TREE AND STABI
LIZER BAR SECURELY ATTACHED.

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
4
Operator's Manual
Rivers Edge One-Man Ladder Stands
FULL BODY HARNESS FALL ARREST SYSTEM
NOTE: Model RE623 17’ Spin Shot Ladder comes with a special Full Body Harness (FAS) with an extended tether, part number 48164. Refer
to the harness instructions provided with that harness for proper use. You must read, understand and follow all instructions provided
and warnings listed at all times.
ALL LADDER STYLE TREESTANDS INCLUDE A TREE BELT THAT MUST BE USED IN ACCORDANCE WITH THE FULL BODY HARNESS (FAS) SUP-
PLIED.
For safety reasons, take time to read each section of these instructions for proper attachment, use and maintenance of this Full Body Harness
(FAS).
To ensure your personal safety, you must read these instructions before using this product. Failure to do so could result in serious personal injury
or death. This product is certied to TMA Standards by an Independent Testing Laboratory. It is the responsibility of the user to follow all instruc-
tions provided, warnings listed, installation, set up, and use of this product.
If you have any questions or do not understand any instructions or warnings listed please call 800-450-EDGE (3343) before attempting to use.
WARNING
YOU MUST READ, UNDERSTAND, AND FOLLOW ALL IN
STRUCTIONS PROVIDED, AND WARNINGS LISTED AT ALL
TIMES. FAILURE TO DO SO COULD RESULT IN SERIOUS IN
JURY OR DEATH.
THE PROVIDED FULL BODY HARNESS FAS IS DESIGNED
TO STOP YOUR FALL, BUT DOES NOT REMOVE THE RISK OF
SERIOUS PERSONAL INJURY OR DEATH. IF YOU DO NOT UN
DERSTAND ANY INSTRUCTIONS OR WARNINGS PROVIDED
IN THIS BOOK, YOU MUST CALL RIVERS EDGE TREESTANDS,
INC., AT 800-450-EDGE (3343) BEFORE USING.
ALWAYS WEAR THIS FULL BODY HARNESS FAS WHILE
USING THE RIVERS EDGE TREESTAND THAT IT WAS PUR
CHASED WITH. FAILURE TO DO SO COULD RESULT IN SERI
OUS INJURY OR DEATH
INSPECT THIS PRODUCT BEFORE EACH USE FOR SIGNS OF
WEAR AND/OR DAMAGE. NEVER USE A DAMAGED PROD
UCT.
THIS PRODUCT IS DESIGNED FOR ADULT USE ONLY. ADULTS
MUST BE BETWEEN 120 LBS MINIMUM AND 300 LBS MAX
IMUM TO USE THIS PRODUCT.
BEFORE ATTEMPTING TO USE THIS HARNESS, PRACTICE IN
STALLING, SET UP, AND USE AT GROUND LEVEL. ONCE YOU
BECOME COMFORTABLE WITH ITS SET UP AND USE, YOU
MAY PROCEED AND USE IT AT HEIGHTS ABOVE GROUND.
DO NOT USE THIS PRODUCT OR ANY RIVERS EDGE PROD
UCT ON UTILITY POLES, TELEPHONE POLES, OR ANY OTHER
MAN MADE STRUCTURES. USE ON STRONG, STRAIGHT, LIVE
TREES ONLY. NEVER USE IN A COMMERCIAL OR INDUSTRIAL
SETTING. USE ONLY AS A FULL BODY HARNESS FAS WHILE
HUNTING.
FAILURE TO DISCARD AND REMOVE THIS FULL BODY HAR
NESS FAS DEVICE FROM SERVICE AFTER FIVE 5 YEARS
FROM MANUFACTURE DATE, WHEN ANY SIGNS OF DAMAGE
ORWEAR EXIST, OR AFTER ARRESTING A FALL, COULD RESULT
IN SERIOUS INJURY OR DEATH.
WARNING
DO NOT USE THIS OR ANY OTHER RIVERS EDGE PRODUCT
IF YOU HAVE A HISTORY OF HEALTH PROBLEMS SUCH AS
HEART PROBLEMS, BACK PROBLEMS, VISION PROBLEMS,
HIGH BLOOD PRESSURE, OR ANY OTHER PHYSICAL OR MEN
TAL IMPAIRMENT. DO NOT USE IF YOU ARE ON ANY TYPE OF
MEDICATION OR ANY OTHER SUBSTANCE SUCH AS ALCO
HOL THAT MAY ALTER YOUR ABILITY TO USE THIS PRODUCT
PROPERLY AND SAFELY.
DO NOT USE IN SLIPPERY OR STORMY CONDITIONS. SNOW,
ICE, FREEZING RAIN, WIND, AND LIGHTNING POSE VERY
DANGEROUS THREATS TO YOUR SAFETY. END YOUR HUNT
AND RETURN TO THE GROUND IF INCLEMENT CONDITIONS
ARISE.
DO NOT ATTEMPT TO REMOVE, MODIFY, AND/OR EXCLUDE
ANY PORTION OF THIS PRODUCT. MODIFICATION, MISUSE,
AND/OR PART SUBSTITUTION COULD RESULT IN SERIOUS
INJURY OR DEATH. IF YOU SUSPECT PARTS ARE MISSING OR
DAMAGED, IMMEDIATELY CONTACT RIVERS EDGE TREES
TANDS, INC., AT 800450EDGE 3343 BEFORE USING.
THIS RIVERS EDGE FULL BODY HARNESS FAS WAS DE
SIGNED AS A FALLARREST ONLY! DO NOT UNDER ANY CIR
CUMSTANCES USE IT TO LEAN OUT OF YOUR TREESTAND.
USING THIS PRODUCT IN SUCH A MANNER COULD RESULT IN
SERIOUS INJURY OR DEATH!
PRACTICE THE USE OF A FULL BODY HARNESS AT GROUND
LEVEL IN THE PRESENCE OF A RESPONSIBLE ADULT TO EX
PERIENCE THE FEELING OF WEARING THIS HARNESS BE
FORE USING IN A HUNTING ENVIRONMENT.

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 5
Operator's Manual
Rivers Edge One-Man Ladder Stands
USING YOUR FULL BODY HARNESS
FALL ARREST SYSTEM
PUTTING ON YOUR FULL BODY HARNESS
1. With the Full Body Harness (FAS) lying on the ground, familiarize yourself
with all of its design and features. SEE FIGURE 1.
2. Loosen both leg straps to the maximum position and unthread the waist
belt completely. Doing both of these actions will allow you to put the Full
Body Harness (FAS) on easier.
3. Now holding the harness, locate the (2) shoulder straps labeled “LEFT
SHOULDER” and “RIGHT SHOULDER”, and spread them apart to make sure
there are no twists or tangles in the harness. SEE FIGURE 2.
4. Position yourself in front of the harness and proceed to step through each
leg loop as if you were putting on a pair of pants. SEE FIGURE 3.
5. Pull harness up your body to chest height where you will slide your left arm
through the“LEFT SHOULDER”strap and your right arm through the“RIGHT
SHOULDER” strap as if you were putting on a jacket. SEE FIGURE 4.
NOTE: Be sure there are no twists in leg or shoulder straps. The “LEFT
SHOULDER” and “RIGHT SHOULDER” printing should be away from your
body so you can read the words while wearing the Full Body Harness (FAS).
If not, the harness is on inside out and must be switched.
Figure 2
right shoulder
left shoulder
Figure 3
leg loops
Figure 4
Figure 1
tree belt
tether
right shoulder strap
leg
straps
left shoulder
strap
adjustment slides
waist strap

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
6
Operator's Manual
Rivers Edge One-Man Ladder Stands
6. Tighten and adjust each leg strap so they are tight to your legs, but not
uncomfortably tight. SEE FIGURE 5.
7. Feed waist strap through waist strap adjustment slide. Tighten and adjust
the waist strap so it is tight t to your body, but not uncomfortably tight.
SEE FIGURE 6.
8. You should now have the Full Body Harness (FAS) congured with the waist
strap on your front side, shoulder straps over the proper shoulders and the
tether strap positioned on your back side. SEE FIGURES 7 & 8. The entire
Full Body Harness (FAS) should have a snug, tight t to your body.
NOTE: Tether strap should not be tangled, twisted or looped around any
portion of the harness. Excess leg and waist strap can be tucked away.
Figure 5
pull strap up to
tighten
Figure 6
Figure 7
WARNING
BE SURE THAT YOU ARE WEARING YOUR FULL BODY HARNESS
FAS CORRECTLY.
Figure 8

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 7
Operator's Manual
Rivers Edge One-Man Ladder Stands
FULL BODY HARNESS FAS USED WITH TREE BELT SUPPLIED WITH ALL LADDER STYLE TREESTANDS
This is the primary attachment method when using a Full Body Harness
(FAS). This method must be used while in your nal hunting position
with any type of treestand. This method must be done immediately
upon reaching the foot platform of your ladder stand.
1. While wearing your Full Body Harness (FAS) correctly, wrap the
tree belt through the loop end of the tether and around tree. Take
the tail end of the tree belt and feed it through the (2) adjustment
slides on tree belt. SEE FIGURE 9. Pull the tail of tree belt tight.
NOTE: Be sure the (2) adjustment slides are facing away from
tree, preventing any obstruction. Do not position tether on or be-
tween the (2) tree belt adjustment slides. SEE FIGURE 9.
Once you have reached your desired hunting height, you must
slide the tree belt up the tree as high as possible. Tighten the tree
belt to the tree by pulling the tree belt tail tight. The tether strap
accommodates your freedom of movement, however, the distance
should be as short as possible to reduce the dynamic load on your
body in case of a fall. There should be no slack in tether strap while
in a sitting position.
2. Reverse these procedures to descend from your treestand.
Figure 9
Tree Belt
pull tight
tether
WARNING
NEVER POSITION YOURSELF IN A WAY THAT ALLOWS THE
TETHER TO BE UNDER YOUR CHIN OR AROUND YOUR NECK.
TETHER STRAP SHOULD NOT BE TANGLED, TWISTED OR LOOPED
AROUND ANY PORTION OFTHE HARNESS. EXCESS LEG AND WAIST
STRAP CAN BE TUCKED AWAY.

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
8
Operator's Manual
Rivers Edge One-Man Ladder Stands
Figure 1A Figure 1B
Figure 2A
Figure 2BFigure 4 Figure 5Figure 3
1. Retrieve the Suspension Relief Device (SRD) strap from the storage pouch on
harness.
2. Insert the looped end of SRD strap through either of the climbing belt loops
sewn on harness, near the waist belt. Take the opposite end of SRD strap and
feed it through the looped end and pull tight, forming a cinch knot. SEE FIG-
URES 1A & 1B.
3. Take the opposite end of SRD strap and feed it through the other climbing belt
loop located on other side of harness. Once SRD strap is fed through climbing
belt loop, feed the SRD strap back through the adjustment slide. SEE FIGURES
2A & 2B.
4. Adjust SRD strap length so it forms a large loop that is slightly shorter then the
length of your legs.
5. Put both feet in the loop and stand up to relieve the pressure from the harness
leg straps. SEE FIGURES 3 & 4. If pressure is still felt on the leg straps while
standing on the Suspension Relief Device (SRD) strap, you must readjust the
length of the SRD strap to relieve pressure o the leg straps.
6. You can also adjust the SRD strap to a shorter length and place your knees on
the SRD strap to relieve the pressure from the harness leg straps. SEE FIGURE 5.
Alternating between the standing method on feet and the kneeling method on
knees, comfort and better blood circulation are maintained.
WARNING
THE SUSPENSION RELIEF DEVICE SRD STRAP MUST BE
ON YOUR PERSON AND ALWAYS BE READILY ACCESSI
BLE TO YOU WHILE WEARING THE FULL BODY HARNESS
FALL ARREST SYSTEM! EVEN IF YOU HAVE ENCOUN
TERED A FALL AND ARE SUSPENDED BY YOUR HARNESS
TETHER, YOU MUST HAVE ACCESS TO THE SUSPENSION
RELIEF DEVICE. ALWAYS HAVE THE SRD STRAP STORED
IN THE STORAGE POUCH SO YOU HAVE ACCESS TO IT!
WARNING
IN CASE OF A FALL…
DO NOT PANIC! This Full Body Harness (Fall Arrest System) is designed
to prevent a fall to the ground. It will suspend you until you are able to
return to your treestand or until help arrives. Using the included Sus-
pension Relief Device (SRD) will help to maintain circulation in the legs
and help mitigate the eects of hanging suspended with your weight
resting on the leg straps of the Full Body Harness. The eects of pro-
longed suspension without using the Suspension Relief Device may
result in unconsciousness and death may occur.

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 9
Operator's Manual
Rivers Edge One-Man Ladder Stands
ALWAYS…
• Bephysicallyt,mentallyalert,andwellrestedbeforeusingthis
product.
• Readandunderstandallinstructionsprovidedandwarningslisted
before each use and save for future reference.
• Practiceusingatgroundlevelrstbeforeusingaboveground.
• Foradultuseonly,WeightRange:Min-120lbs.Max-300lbs.
• Inspectbeforeeachuseforsignsofwearand/ordamage-neveruse
a damaged product. Replace with new.
• Storeinacool,dryplace.Neverputawaydamptoavoidmildew.
NEVER…
• Sleepwhileusingthisproduct.
• Useinslipperyorstormyconditions.
• ExceedtheWeightRange:Minimum-120lbs.Maximum-300lbs.
• AltertheoriginaldesignofyourFullBodyHarness(FAS).
• Usetoleanoutfromstand.
• Useifhistoryofhealthproblemspersist.
• Usewhileintoxicatedorusingmedication.
• LoanyourFullBodyHarness(FAS)tosomeoneelse.
• Useadamagedproduct,replacewithnew.
• Useinacommercialorindustrialsetting.
• Leaveproductoutdoors.
WARNING
EXTREME WARNING! IF FALL OCCURS WHILE USING THIS
FULL BODY HARNESS FALL ARREST SYSTEM YOU MUST
ALWAYS REMEMBER TO REMAIN CALM. REGAIN YOUR
THOUGHTS AND COMPOSURE AND TRY TO RECOVER AS
QUICKLY AS POSSIBLE. SOME OPTIONS YOU MAY HAVE,
BUT NOT ALL VARIABLES INCLUDE USING YOUR CLIMBING
STICKS, TREE STEPS, ETC. AS FOOTING TO RAISE YOURSELF
TO RELIEVE PRESSURE OFF THE LEG &WAIST STRAPS OR TO
RECOVER, CLIMB BACK ONTOYOUR STAND PLATFORM AND
STAY PUT UNTIL YOUR THOUGHTS AND JUDGEMENT ARE
CLEAR. IF RAISING YOURSELF IS NOT AN OPTION,
CARRY A
SIGNAL DEVICE SUCH AS A MOBILE PHONE, RADIO, WHISTLE, SIG
NAL FLARE OR PERSONAL LOCATOR DEVICE PLD TO CALL OR
ALERT SOMEONE TO HELP RESCUE YOU.
WHILE YOU ARE DOING ONE OR MORE OF THESE OPTIONS,
YOU MUST KEEP MOVING ALL OF YOUR LIMBS INCLUD
ING BENDING YOUR KNEES AND LIFTING YOUR LEGS UP TO
PROMOTE CIRCULATION THROUGHOUT YOUR BODY.
THE SUSPENSION RELIEF DEVICE SRD STRAP MUST BE ON
YOUR PERSON AND ALWAYS BE READILY ACCESSIBLE TO
YOU WHILE WEARING THE FULL BODY HARNESS FALL AR
REST SYSTEM! EVEN IF YOU HAVE ENCOUNTERED A FALL
AND ARE SUSPENDED BY YOUR HARNESS TETHER, YOU
MUST HAVE ACCESS TO THE SUSPENSION RELIEF DEVICE.
ALWAYS HAVE THE SRD STRAP STORED IN THE STORAGE
POUCH SO YOU HAVE ACCESS TO IT!
THE SUSPENSION RELIEF DEVICE IS DESIGNED FOR PRO
VIDING IMMEDIATE RELIEF FROM PROLONGED SUSPEN
SION TRAUMA. IF YOU ARE NOT PHYSICALLY ABLE TO PER
FORM THE STEPS INVOLVED IN THE CORRECT USE OF THIS
SUSPENSION RELIEF DEVICE SRD STRAP, YOU SHOULD
HUNT FROM GROUND LEVEL ONLY.
HUNTERS WITH VARYING DEGREES OF PHYSICAL FITNESS
MAY REQUIRE DIFFERENT PLANS TO RECOVER/ESCAPE THE
EFFECTS OF PROLONGED SUSPENSION. IF YOU DO NOT RE
COVER QUICKLY, OR KEEP MOVING TO PROMOTE BLOOD
CIRCULATION, UNCONSCIOUSNESS AND DEATH MAY OC
CUR. HAVE A PERSONAL PLAN AND PRACTICE IT IN THE
PRESENCE OF A RESPONSIBLE ADULT BEFORE LEAVING THE
GROUND. NO ONE ESCAPE/RESCUE PLAN WILL WORK FOR
EVERY HUNTER ON EVERY TREE IN EVERY CIRCUMSTANCE.
ONLY YOU CAN DETERMINE THE BEST RECOVERY/ESCAPE
PLAN FOR YOUR HUNTING SITUATION BEFORE LEAVING
THE GROUND. HUNT FROM THE GROUND WHEN SELF
RECOVERY/ESCAPE ABILITY IS ABSENT. THERE IS TIME TO
MAKE A CORRECT DECISION ON WHAT ACTION TO TAKE IF
A FALL OCCURS WHILE WEARING A FULL BODY HARNESS.
IT IS IMPORTANT TO REMEMBER, "DO NOT PANIC." REMAIN
CALM AND IMPLEMENT YOUR PRACTICED RESCUE, RELIEF
AND RECOVERY PLAN.
WARNING
INFORM SOMEONE OF THE HUNTING LOCATION, WHERE
THE TREESTAND WILL BE LOCATED AND THE EXPECTED DU
RATION OF THE HUNT.
CARRY A SIGNAL DEVICE SUCH AS A MOBILE PHONE, RADIO,
WHISTLE, SIGNAL FLARE OR PERSONAL LOCATOR DEVICE PLD
AND IT MUST BE READILY AVAILABLE AT ALL TIMES.
FAILURE TO FOLLOW HARNESS INSTRUCTIONS COULD
RESULT IN NOT BEING ABLE TO RETURN TO THE STAND AND
BEING SUSPENDED IN A HARNESS AFTER A FALL.
IF THE HUNTING LOCATION IS UNKNOWN BY ANYONE AND
COMMUNICATION EFFORTS ARE UNSUCCESSFUL, YOU
MUST HAVE A PERSONAL PLAN FOR RECOVERY/ESCAPE BE
CAUSE PROLONGED SUSPENSION IN A HARNESS WITHOUT
THE USE OF THE SUSPENSION RELIEF DEVISE SRD CAN BE
FATAL. IT IS IMPORTANT TO EXERCISE THE LEGS BY PUSH
ING AGAINST THE TREE OR DOING OTHER FORMS OF CON
TINUOUS LEG EXERCISES TO MITIGATE SUSPENSION TRAU
MA BLOOD POOLING WHILE BEING SUSPENDED.
SEVERAL OPTIONAL PRODUCTS/SYSTEMS ARE AVAILABLE
THAT OFFER SELFRECOVERY OR SELFEXTRACTION FROM
A FALL WHEN SUSPENDED IN A HARNESS. SOME SYSTEMS
AUTOMATICALLY DESCEND THE USER WHILE OTHERS ALLOW
USER CONTROL. ONE OF THESE PRODUCTS/SYSTEMS CAN BE
CONSIDERED FOR USE AS AN ADDITIONAL SAFETY PRECAU
TION AGAINST PROLONGED SUSPENSION AND SUSPENSION
TRAUMA. BE SURETO FOLLOW THE MANUFACTURERS' DIREC
TIONS ON THE SAFE USE OF THESE PRODUCTS/SYSTEMS.

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
10
Operator's Manual
Rivers Edge One-Man Ladder Stands
INSPECTION AND MAINTENANCE SCHEDULE
FOR ALL RIVERS EDGE PRODUCTS
• Inspectallwebbing,rope,cord,andstrapassembliesforwearordamage.
• Inspectcablesandcableendsfordamageorkinking.
• Inspectallhardwareandchaincomponentsfordamage.
• Inspectforanystructuraldamagetoproduct.(Returntofactoryforrepairor
discard product if any damage is found.)
• Inspectallnutandboltassembliestobecertainnoneareloose.
• Inspectforanymissingparts.
• Lubricate all pivot and slide together points with powder graphite to prevent noise,
wear, and rust.
• Inspectentireproductforanyrust,corrosion,cracks,freezing,excessiveheat,
or rotting damage that may eect the safety of your product. Discard any
questionable product.
• Inspectentireproductforanystructuraldamage-paycloseattentiontoall
weld locations. (Return to factory for repair or discard product if any damage
is found.)
• Usingcorrectwrenchesinspectallnut&boltassemblylocationsandsnugup
any that may be loose. Be careful not to crush tubing when tightening!
• Inspectandcheckoperationofallcables,cableends,cord,rope,webbing,and
strap or chain assemblies. Replace with factory new any item or assembly that
shows signs of wear, damage, kinking, or functions incorrectly.
• Inspectseat.Replaceanyseatwithfactorynewthatshowssignsofstructural
damage or wear.
• Inspectallhardwareforwearordamage,alsobesureyouhavenomissingparts.
• Nevermodifyyourstandinanywaybymakingrepairs,replacingparts,oraltering
adding or attaching anything to it except if explicitly authorized in writing by
the manufacturer.
ALWAYS…
• Bephysicallyt,mentallyalert,andwellrestedbeforeusingthisproduct.
• Read,understandandfollowallwarningsandinstructionsbeforeuseand
save for future reference.
• UsetheprovidedFullBodyHarness(FallArrestSystem)thatmeetsTMA
standards immediately upon reaching foot platform.
• Befullyawareoffootplacement.
• Recommendedforadultuseonly.
• Inspectladderformissingparts,allhardwarecondition,anddamage
before every application, replace if necessary.
• Pullupabow,backpack,rearmorotherequipmentonlyafterbeing
secure in the treestand and a re arm must be pulled up with it unloaded,
chamber open and muzzle down.
• Removeladderaftereveryuse,storeproductindoors.
• UseonlyRiversEdgeoriginalreplacementparts.
• Leanforward,towardstree,whenascendinganddescendingladder.
• Placeladderondry,levelground.
• Lubricateallslidetogetherpointstopreventbinding,wear,rust&noise.
• Avoidallelectricalpowerlines.
• Alwaysinformsomeoneofthehuntinglocation,wherethetreestandwill
be located and the expected duration of the hunt.
• Carryasignaldevicesuchasamobilephone,radio,whistle,signalareor
personal locator device (PLD) and it must be readily available at all times.
• Inspectthetreestandandallsafetydeviceseachtimebeforeuseanddo
not store a treestand outdoors when not in use.
NEVER…
• Sleepinatreestand
• Useonwet,soft,orunstableground.
• Exceedthetotaleldratingof300lbs.
• Attachtoadead,odd-shaped,leaning,diseased,loosebarkedtreesor
utility poles.
• Useontreeswithadiametersmallerthan12inchesornolargerthan20inches.
• Useatreestandduringinclementweathersuchasrain,lightning,
windstorms or icy conditions and end your hunt and return to the ground
if inclement conditions arise.
• Altertheoriginaldesignofyourstand.
• Jumponoruseinacarelessmanner.
• Leanoutoveredgeofdevice.
• Usewhenintoxicatedorusingover-the-countermedicationorprescription
drugs.
• Useadamagedproduct,replacewithnew.
• Loanyourstandtosomeoneelse.
• Usewithoutstabilizerbar,springlockpins&tie-oropessecurelyattached.
• Standontheseat,itisdesignedforsittingonly.
• Useatreestandwhenfeelingill,nauseousordizzy,orifyouhaveaprior
medical condition that could cause a problem i.e., heart condition, joints
that lock-up, spinal fusion, etc. or if you are not well rested.
• Relyonatreebranchforsupport.
• Jumporbounceonatreestandtoseatittothetree

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 11
Operator's Manual
Rivers Edge One-Man Ladder Stands
ASSEMBLY INSTRUCTIONS RE619
Tools needed – two 7/16" wrenches, rubber mallet
IMPORTANT ASSEMBLY TIP: Do not tighten any nut and bolt combinations
completely until all parts are assembled together! Finger tighten plus one
turn of a wrench only! This will temporarily hold the lock nut on the bolt while
helping alignment of all parts! After all parts are assembled together, all nut
& bolt combinations must be completely tightened.
1. Attach the foot platform (1ML37) to the inside of side rails (SL61) using (2)
provided 1/4-20 x 2-1/4”bolts and locknuts. SEE FIGURE 1. DO NOT tighten
all nut & bolt assemblies completely!
NOTE: Mesh surface shouldbe on topwith squared endsof platform closest
to side rails.
2. Attach the rear (blade end) of tree blade frame (1ML34) to the inside of side
rails, and the (2) armrests (AR12) to the outside of side rails using (2) provided
1/4-20 x 3-1/4” bolts, locknuts and steel washers. SEE FIGURE 2.
3. Attach the front end of tree blade frame to the side rails and the front end
of armrests to the side rails using (4) provided 1/4-20 x 2-1/4” bolts, lock
nuts and (2) steel washers. SEE FIGURE 2.
4. Attach the seat frame (1ML15) to the tabs on the tree blade frame using (2)
provided 1/4-20 x 1-1/2” bolts, locknuts, steel washers and nylon washers.
SEE FIGURE 3. Attach the (2) provided rubber bumper stops to the top side
of tree blade frame by pressing into provided holes. SEE FIGURE 3.
NOTE: Mesh surface of seat frame should be on top.
NOTE: Nylon washers should be placed between the tabs and seat frame
to prevent noise.
Figure 1
Figure 2
Figure 3
cutout view
of foot platform
1/4-20 x 2-1/4”
bolts
locknuts
side rails
1/4-20 x 2-1/4” bolts
armrest
locknuts
locknuts
tree blade frame
seat frame
1/4-20 x 1-1/2” bolts
rubber bumpers
tabs
nylon washers
steel washers
tree blade frame
side rails
shooting rail
mounts
steel washers
1/4-20 x 3-1/4” bolts
steel washers

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
12
Operator's Manual
Rivers Edge One-Man Ladder Stands
Figure 4
seat cushion
9" camo sleeve
shooting rail
4-step ladder section
w/ mounting holes
5. Attach the (2) brace supports (48055) to the rear holes of tree blade frame
and foot platform using (4) provided 1/4-20 x 2” bolts, locknuts and steel
washers. SEE FIGURE 4.
6. Insert the assembled top platform section into the pockets of top ladder
section with mounting holes (SL74). Attach the (2) support braces to the
back side of top ladder section using (2) provided 1/4-20 x 2-3/4” bolts,
locknuts and steel washers. SEE FIGURE 4. You must now tighten all nut
& bolt assemblies. Be sure not to over tighten or crush tubing when
tightening!
7. Attach the removable seat cushion (48819) to the top of seat frame. Wrap
the Velcro straps or buckle straps around seat frame and secure together.
Snap the side release buckles together for buckle style seats. Pull straps
tight so seat is not loose.
8. a. Attach the shooting rail (SR10) by setting rail down over studs on armrests.
SEE FIGURE 4. Lubrication is recommended to prevent binding and noise.
b. Attach the (2) provided 9” camo sleeves to the armrests and the (1) 18”
camo sleeve to the shooting rail by wrapping around metal tubing and
attaching Velcro together.
c. Tap the (2) provided plastic end caps into top end of top ladder section
using a rubber mallet.
9. The remaining (3) ladder sections are assembled to the top ladder assembly
onthegroundinthefollowingorder:bottomsection(SL71ladder);second
section(SL72ladder);thirdsection(SL73ladder);topsection(assembled
top, platform section). SEE FINISHED 20’LUMBERJACK EXTREME LADDER.
1/4-20 x 2-3/4" bolts
steel washers
1/4-20 x 2" bolts
top platform
section
support braces
locknuts
steel washers
1/4-20 x 2" bolts
18" camo sleeve

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 13
Operator's Manual
Rivers Edge One-Man Ladder Stands
10. With all sections assembled together on ground, secure all sections together
using (6) provided 1/4-20 x 2-1/4”wing bolts with wing nuts and (2) provided
1/4-20 x 3-1/4”hex bolts with locknuts. The longer 3-1/4”hex bolts must be
used to connect the top ladder section and the assembled top platform
section. SEE FIGURE 5.
11. a. Attach the stabilizer bar extension tube (1ML23) to the second ladder
section mounting bracket using (1) provided spring lock pin.
SEE FIGURE 6.
b. Slide the stabilizer bar (L17) into the extension tube and attach the two
pieces together using (1) provided spring lock pin. Spring lock pin must go
through both the extension tube and stabilizer bar at appropriate hole to
achieve desired distance from tree. Adjustment in length may be needed
when ladder is uprighted later in instructions. SEE FIGURE 6.
12. Tie one end of each of the provided 22’ropes to the square tube side rails,
just in front of the welded tree blade. Be sure your double knots are secure.
SEE FIGURE 7.
Figure 5
Figure 7
Figure 6
stabilizer bar
spring lock pins
extension tube
1/4-20 x 3-1/4" hex bolts
wing nuts
1/4-20 x 2-1/4
wing bolts
locknuts

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
14
Operator's Manual
Rivers Edge One-Man Ladder Stands
NO EXTENSIONS AVAILABLE FOR THIS MODEL,
TESTED FOR 20' MAXIMUM HEIGHT!
14
6
11
19
8
10
14
17
14
11
10
13
3
25
1
24
14
13
12
10
9
4
14
11
12
16
23
7
5
22
18
2
15
15
21
20
10
LADDER PARTS 
UPPER SECTION
LADDER PARTS 
LOWER SECTION
14
6
11
19
8
10
14
17
14
11
10
13
3
25
1
24
14
13
12
10
9
4
14
11
12
16
23
7
5
22
18
2
15
15
21
20
10

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 15
Operator's Manual
Rivers Edge One-Man Ladder Stands
KEY # PART # DESCRIPTION QT Y.
11ML15 SEAT FRAME 1
21ML23 STABILIZER SUPPORT TUBE 1
31ML34 SEAT FRAME 1
41ML37 FOOT PLATFORM, LADDER 1
5 48042B NUT, WING 1/420 6
6 48055 BRACE SUPPORT, 55" 2
7 48057B SCREW, WING 1/420 X 21/4 6
8 48153B BOLT, HHCS GR5 BLK 1/420 X 2 4
9 48240B BOLT, HHCS GR5 BLK 1/420 X 11/2 2
10 48261B WASHER, BLK 1/4 12
11 48271B BOLT, HHCS GR5 BLK 1/420 X 21/4 6
12 48273B BOLT, HHCS GR5 BLK 1/420 X 31/4 4
13 48679 RUBBER BUMPER STOP 2
14 48752B NUT, FLANGED, NYLOCK 1/420 18
15 63281 SNAP PIN, 1/4 X 13/4 2
16 67540B BOLT, HHCS GR5 BLK 1/420 X 23/4 2
17 AR12 ARMREST 2
18 L17 STABILIZER BAR 1
19 SL61 SIDE RAIL 2
20 SL71 LADDER, BOTTOM 53" 1
21 SL72 LADDER, W/VAM 53" 1
22 SL73 LADDER, 53" 1
23 SL74 LADDER, TOP 53" 1
24 SR10 SHOOTING RAIL 1
25 WN516 WASHER, BLK 5/16" 2
ITEMS BELOW NOT SHOWN
 48819 SEAT, 1" W/ BACKREST 1
 48737 CAMO SLEEVE, 18" 1
 48736 CAMO SLEEVE, 9" 2
 48415 RATCHET STRAP 2
 48155 FULL BODY HARNESS FAS 1
 48063 TIEOFF ROPE, 22' SOLD IN ROPE KIT ONLY 2
FINISHED 20’ LUMBERJACK EXTREME LADDER
top section
ratchet strap
fourth section
third section
second section
bottom section
22' tie-o
ropes
ratchet strap
stabilizer bar
extension tube
spring lock pins
Maximum Height - 20'
Maximum Field Rating - 300 lbs.
Tree Diameter Range - 12" to 20"

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
16
Operator's Manual
Rivers Edge One-Man Ladder Stands
ASSEMBLY INSTRUCTIONS RE607
Tools needed – two 7/16" wrenches
IMPORTANT ASSEMBLY TIP: Do not tighten any nut and bolt combinations
completely until all parts are assembled together! Finger tighten plus one
turn of a wrench only! This will temporarily hold the lock nut on the bolt while
helping alignment of all parts! After all parts are assembled together, all nut
& bolt combinations must be completely tightened.
1. Attach the foot platform (48045) to the inside of side rails (1ML24) using (2)
provided 1/4-20 x 2-1/4”bolts and locknuts. SEE FIGURE 1. DO NOT tighten
all nut & bolt assemblies completely!
NOTE: Mesh surface should be on top with squared ends of platform
closest to side rails.
2. Attach the tree blade frame (1ML34) to the inside of side rails, and the (2) shooting
rail mounts (112ML43) and (2) armrests (LFX5) to the outside of side rails using
(4) provided 1/4-20 x 3-1/4" bolts, locknuts and steel washers. SEE FIGURE 2A.
3. Attach seat frame (1ML15) to the tabs on the tree blade frame using (2)
provided 1/4-20 x 1-1/2”bolts, locknuts, nylon washers and (4) steel washers.
SEE FIGURE 2B. Attach the (2) provided rubber bumper stops to top side
of tree blade frame by pressing in to provided holes. SEE FIGURE 2B.
NOTE: Mesh surface of seat frame should be on top.
NOTE: Nylon washers should be placed between tabs and seat frame to
eliminate noise.
Figure 1
cutout view
of foot platform 1/4-20 x 2-1/4”
bolts
locknuts
side rails
Figure 2A
1/4-20 x 3-1/4” bolts
locknuts
steel washers
Figure 2B
locknuts
tree blade frame
seat frame
1/4-20 x 1-1/2” bolts
rubber bumpers
tabs
nylon washers
steel washers
steel washers
tree blade frame
side rails
shooting rail mounts
armrests

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 17
Operator's Manual
Rivers Edge One-Man Ladder Stands
Figure 3
seat cushion
9" camo shelves
18" camo sleeve
shooting rail
1/4-20 x 3-1/4" bolts
steel washers
shooting rail mounts
1/4-20 x 3" bolts
support braces
locknuts
top platform section
locknuts
1/4-20 x 2-1/4" bolts
4-step ladder section
w/ mounting holes
4. Insert the assembled top platform section into the top ladder section with
mounting holes (SL54). Attach the (2) support braces (48064) to the outside of
side rails, foot platform and 4-step ladder section with mounting holes using
(2) provided 1/4-20 x 3-1/4" bolts, (2) 1/4-20 x 3" bolts, (2) 1/4-20 x 2-1/4" bolts,
(4) steel washers and (6) locknuts. SEE FIGURE 3. You must now tighten all
nut & bolt assemblies. Be sure not to over tighten or crush tubing when
tightening!
5. Attach the removable seat cushion (48819) to the top of seat frame. Wrap
the Velcro seat straps or buckle straps around seat frame and secure
together. Snap the side release buckles together for buckle style seats. Pull
straps tight so seat is not loose.
6. a. Attach the shooting rail (SR10) by setting rail down over studs on shooting
rail mounts. SEE FIGURE 3. Lubrication is recommended to prevent
binding and noise.
b. Attach the (2) provided 9" camo arm pad/shelves to the armrests and (1)
18" camo foam pad to the shooting rail by wrapping around metal tubing
andattachingVelcrotogether.Shelvesshouldlayoutattotheoutsideof
armrests. Use these shelves for holding various hunting gear items so they
are readily available to you during your hunt.
7. The remaining (3) ladder sections are assembled to the top ladder assembly
onthegroundinthefollowingorder:bottomsection(SL51ladder);second
section (SL52 ladder); third section (SL51 ladder); fourthsection(SL54
ladder);topsection(assembledtopplatformsection).SEE FINISHED 22'
TIMBERSHOT EXTREME LADDER.

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
18
Operator's Manual
Rivers Edge One-Man Ladder Stands
8. Attach the truss support (48023) to where the second and third ladder
sections have been slid together, using (2) provided 1/4-20 x 1-3/4” wing
bolts and wing nuts. SEE FIGURE 4.
9. a. Attach the counter lock support bar (48025) to the truss support mounting
bracket using (1) provided 1-3/4”spring lock pin. SEE FIGURE 4.
b. Attach the opposite end of counter lock support bar and the stabilizer
bar extension tube (1ML23) to the second ladder section mounting bracket
using (1) provided 2-1/2”spring lock pin. SEE FIGURE 4.
NOTE: Pin may have a tight t. This is normal due to the counter lock
support bar acting as a locking bar. You may need to temporarily loosen
the wing nuts/bolts on truss support to help with hole alignment.
Retighten wing nuts/bolts when complete.
c. Slide the stabilizer bar (L17) into the extension tube and attach the two
pieces together using (1) provided 1-3/4”spring lock pin. Spring lock pin must
go through both the extension tube and the stabilizer bar at appropriate hole
to achieve desired distance from tree. Adjustment in length may be needed
when ladder is uprighted later in instructions. SEE FIGURE 4.
Figure 4
stabilizer bar
extension tube
spring lock pin
third ladder section
1-3/4" wing bolts
second ladder section
2-1/2" spring lock pin
second ladder
section mounting
bracket
truss support
spring lock pin
truss support mounting bracket
wing nut
counter lock support bar
10. Insert the (4) truss male braces (48041) into the (4) truss female braces
(48040).Havetheattenedendofthebracesorientedinoppositedirections
of each other and align the holes to secure the braces together using (4)
provided 1/4-20 x 1-1/4”bolts and locknuts. SEE FIGURE 5 ON FOLLOWING
PAGE. Tighten securely, being careful not to over tighten or crush
tubing!
NOTE: You must be sure to have the attened ends of braces oriented in
opposite directions of each other so they will align properly (ush) to the
mating parts later on in assembly.
11. a. Attach (2) assembled braces to where the fourth ladder section and
assembled top platform section have been slid together using (2) provided
1/4-20x1-3/4”wingboltsandwingnuts.Youmustattachtheattenedend
of these braces so that it will cause them to angle away from the ladder,
towards the rounded end of truss support. It is recommended to position the
female end of these upper brace assemblies to the top of the ladder so water
will drain freely during use. SEE FIGURE 5 AND 6 ON FOLLOWING PAGE.

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 19
Operator's Manual
Rivers Edge One-Man Ladder Stands
Figure 5
truss male braces
truss female braces truss male braces
locknuts
1/4-20 x 1-1/4" bolts
This end of ladder
assembles to
top platform section.
wing nuts
truss female braces
1-3/4" wing bolts
wing nuts
wing bolts
Figure 7
Figure 6
1-3/4" wing
bolts
wing nuts
assembled top
platform section
assembled truss
braces
c. Attach the opposite end of lower brace assemblies to the bottom ladder
section using (2) provided 1/4-20 x 1-3/4” wing bolts and wing nuts. SEE
FIGURE 5.
NOTE: Lifting on the bottom end of ladder will be needed to help align the
holes in the attened end of brace assemblies to the slots in the bottom
ladder section as you are completing the pre-built strength “arch” in the
ladder assembly. This is normal.
d. Secure the rst and second ladder sections as well as the third and fourth
ladder sections together using (4) provided 1/4-20 x 1-3/4”wing bolts and
wing nuts. SEE FIGURE 6.
12. Tighten all wing bolt/wing nut combinations securely by hand. Be sure
not to over tighten or crush tubing. Double and triple check all hardware
locations to make sure they are all securely fastened.
13. Tie one end of each of the provided 22’ropes to the platform side rails, just
in front of the tree blade. Be sure your double knots are secure. SEE
FIGURE 7.
b. Attach the remaining (2) assembled braces and the opposite end of
previously assembled braces to the truss support using (2) provided 1/4-20
x1-3/4”wingboltsandwingnuts.Youmustattachtheattenedendof
braces so that it will cause the lower braces to angle towards the bottom
end of ladder. It is recommended to position the female end of these lower
brace assemblies to the truss support so water will drain freely during use.
SEE FIGURE 5.
NOTE: Lifting on the bottom end of ladder will be needed to help align the
holes in the attened end of brace assemblies to the holes in the truss
support as you are beginning to put the pre-built strength “arch” in the
ladder assembly. This is normal.

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5
20
Operator's Manual
Rivers Edge One-Man Ladder Stands
LADDER PARTS RE607
5
1
4
18
2
6
7
3
24
18
20
10
26
27
26
28
22
21
15
19
8
15
11
13
12
16
30
9
14
14
21
29
33
32
31
25
23
17
NO EXTENSIONS AVAILABLE FOR THIS MODEL,
TESTED FOR 22' MAXIMUM HEIGHT!