Salora 19LED8005TD User manual

www.12volttv.nl

English - 1 -
Safety Information
To operate your TV in extreme ambient conditions
may cause the damage of the device.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
Note : Follow the on screen instructions for operating the
related features.
If there is lightning or storms, or if the TV is not
going to be used for a while (e.g. if going away
on holiday), disconnect the TV set from the
mains. The mains plug is used to disconnect TV
set from the mains and therefore it must remain
readily operable.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
IMPORTANT - Please read these
instructions fully before installing or
operating
WARNING: Never let people (including
children) with reduced physical, sensory or mental
Contents capabilities or lack of experience and / or knowledge use
electrical devices unsupervised.
• For ventilation purposes, leave a free space of at least 10
cm all around the set.
• Do not block ventilation holes.
• Do not place the TV on sloping or unstable surfaces, the
TV may tip over.
• Use this device in moderate climates.
• Donotplacetheset,apieceoffurniture,etc.onthepowercordor
pinchthecord.Handlethepowercordbytheplug.Donotunplug
theappliancebypullingfromthepowercordandnevertouchthe
powercordwithwethandsasthiscouldcauseashortcircuitor
electricshock.Nevermakeaknotinthecordortieitwithother
cords.Thepowercordshouldbeplacedinsuchawaythattheyare
notlikelytobesteppedon.Adamagedpowercordcancausere
orgiveyouanelectricshock.Whenitisdamagedandneedstobe
replaced,itshouldbedonebyqualiedpersonnel.
• The power cord plug should be easily accessible. Do not
place the TV, furniture, etc. on the power cord. A damaged
powercord/plugcancausereorgiveyouanelectricshock.
Handle the power cord by the plug, do not unplug the TV
by pulling the power cord. Never touch the power cord/plug
with wet hands as this could cause a short circuit or electric
shock. Never make a knot in the power cord or tie it with
other cords. When damaged it must be replaced, this should
onlybedonebyqualiedpersonnel.
• Do not use this TV in a humid or damp place. Do not expose
the TV to liquids. If any liquid falls into the cabinet unplug
theTVandhaveitcheckedbyqualiedpersonnelbefore
operating it any further.
• Do not expose the TV to direct sunlight or other heat
sources.
• The TV should not be placed near to open
amesorsourcesofintenseheatsuchasan
electric heater.
• Excessive sound pressure from earphones and headphones
can cause hearing loss.
• Ensurethatnoopenamesources,suchaslit
candles, are placed on top of the TV.
• To prevent injury, this TV must be securely
attached to the wall in accordance with the installation
instructions (if the option is available).
• Occasionally, a few non-active pixels may appear on the
screenasaxedblue,greenorredpoint.Pleasenotethat
this does not affect the performance of your product. Take
carenot toscratch thescreenwith ngernailsor other
hard objects.
• Before cleaning, unplug the TV from the wall socket. Only
use a soft, dry cloth while cleaning.
Warning Serious injury or death risk
Risk of electric shock Dangerous voltage risk
Caution Injury or property damage risk
Important Correctly the system operate
Notice Additional notes marked
Safety Information ..................................................1
Getting Started .......................................................2
Notications&Features&Accessories..................2
Features .................................................................2
Control Buttons on the TV ......................................2
Connect Power ......................................................3
Remote Control .....................................................4
Connections............................................................5
Media Browser Menu..............................................6
TV Menu Features and Functions ..........................7
General TV Operation ............................................9
Electronic Programme Guide (EPG) ......................9
Troubleshooting&Tips.........................................10
PC Input Typical Display Modes .......................... 11
DVD Mode............................................................12
DVD Control Panel Buttons..................................13
General Operation................................................14
General Playback .................................................15
DVD Troubleshooting ...........................................15
Disc Types Compatible with This Unit ..................16
MOBIL TV INSTRUCTION MANUAL ...................17
www.12volttv.nl

Getting Started
English - 2 -
Notications&Features&Accessories
Environmental Information
This television is designed to consume less energy
to help save the environment. To reduce energy
consumption, you should take the following steps:
If you set the Power Save Mode as Eco, the TV will
switch to energy-saving mode. The Power Save Mode
settings can be found In the ‘Picture’ section of the
Main Menu. Note that some picture settings will be
unavailable to be changed.
If Picture Off is selected, “Screen will be off in
3 seconds.” message will be displayed. Select
PROCEED and press OK to continue. The screen
will be off immediately.
When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce energy consumption.
StandbyNotications
1. If the TV does not receive any input signal (e.g.
from an aerial or HDMI source) for 5 minutes, the
TV will go into standby. When you next switch-
on, the following message will be displayed:
“Standby Cause No Signal” Press OK to
continue.
2. If the TV has been left on and not been operated
for a while, the TV will go into standby. When
you next switch-on, the following message will
be displayed. “Standby Cause No Operation”
Press OK to continue.
Features
•Remote controlled colour TV.
•Fully integrated digital (DVB-T).
•HDMI inputs are for connecting a device that has
a HDMI socket.
•USB input.
•OSD menu system.
•Scart socket for external devices (such as DVD
Players, PVR, video games, etc.)
•Stereo sound system.
•Teletext.
•Headphone connection.
•Automatic programming system.
•Manual tuning.
•Automatic power down after up to six hours.
•Sleep timer.
•Child lock.
•Automatic sound mute when no transmission.
•NTSC playback.
•AVL (Automatic Volume Limiting).
•PLL (Frequency Search).
•PC input.
•Plug&Playfor Windows98, ME,2000, XP,Vista,
Windows 7.
•Game Mode (Optional).
Accessories Included
•Remote Control
•Batteries: 2 x AAA
•Instruction Book
• 12VACAdaptor
Control Buttons on the TV
TVControlSwitch&Operation
1. Up direction
2. Down direction
3. Programme/Volume / AV / Standby-On selection
switch
The Control button allows you to control the Volume/
Programme/ Source and Standby-On functions of
the TV.
To change volume: Increase the volume by pushing
the button up. Decrease the volume by pushing the
button down.
To change channel: Press the middle of the button,
the channel information banner will appear on screen.
Scroll through the stored channels by pushing the
button up or down
To change source: Press the middle of the button
twice, the source list will appear on screen.Scroll
Getting Started
www.12volttv.nl

English - 3 -
through the available sources by pushing the button
up or down.
To turn the TV off: Press the middle of the button
down and hold it down for a few seconds, the TV will
turn into standby mode.
Inserting the Batteries into the Remote
Lift the cover on the back of the remote upward gently.
Install two AAA batteries. Make sure to match the +
and - ends of the batteries in the battery compartment
(observe the correct polarity) Replace the cover.
Connect Power
IMPORTANT:TheTVsetisdesignedtooperateon12V
DC.Forthis,anadaptorisusedwhichgives12Vvoltage.
Connectthisadaptortoasystemthatsupplies110-240V
AC,50/60Hz
Antenna Connection
Connect the “aerial” plug to theAERIAL INPUT (ANT)
socket located on the back of the TV.
Notication
Manufactured under license from Dolby Laboratories.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“HDMI,theHDMIlogoandHigh-DenitionMultimedia
Interface are trademarks or
registered trademarks of HDMI
Licensing LLC.”
Information for Users on Disposal of Old
Equipment and Batteries
[European Union only]
These symbols indicate that equipment with these
symbols should not be disposed of as general
household waste. If you want to dispose of the product
or battery, please consider the collection systems or
facilities for appropriate recycling.
Notice: The sign Pb below the symbol for batteries indicates
that this battery contains lead.
Products
Battery
Specication
TV Broadcasting PAL B/G D/K K
Receiving Channels
VHF (BAND I/III)
- UHF (BAND U) -
HYPERBAND
Number of Preset
Channels 1000
Channel Indicator On Screen Display
RF Aerial Input 75 Ohm (unbalanced)
Operating Voltage 110-240V AC, 50/60Hz.
Audio German+Nicam Stereo
Audio Output Power
(WRMS.) (10% THD) 2 x 2,5
Power Consumption 35 W
Weight 3,60
TV Dimensions
DxLxH (with foot) 134 x 451 x 331
TV Dimensions
DxLxH (without
foot)
54 x 451 x 296
Operation
temperature and
operation humidity:
5ºCupto45ºC,85%
humidity max
www.12volttv.nl

Getting Started
English - 4 -
.
ZOOM REPEAT
LANG.
1 2 3
45 6
789
0
V
P
EXIT
BACK
Q.
MENU
.,/@
V
P
SOURCE
1
/
2
/
PRESETS
Teletext
Press button to enter. Press again to activate mix
mode. Press once more to exit. Follow the instructions
displayed on digital teletext screen.
Digital Teletext (for UK only)
Press button to view digital teletext information.
Operate it with the coloured buttons, cursor buttons
and the OK button. The operation method may differ
depending on the contents of the digital teletext. Follow
the instructions displayed on the digital teletext screen.
When the button is pressed again, the TV returns to
television broadcast.
Remote Control
1. Standby
2. My button 1
3. No Function
4. Changes equalizer modes
5. Picture mode selection
6. Numeric buttons
7. TV Button
8. Electronic programme guide
9. Menu
10. Navigationbuttons(Up/Down/Left/Right)(Right-TXTSubpage)
11. Back
12. Favourites
13. Volume Up / Down
14. Info
15. No Function
16. Play
17. Current language
18. Rapid reverse
19. Red button / IDTV Page up
20. Green button / IDTV Page down
21. My button 2
22. Source selection
23. Sleep timer
24. Media browser
25. Channel swap
26. Teletext
27. Q. Menu
28. OK/Select/Hold(inTXTmode)/ChannelList(DTVmode)
29. Exit/Return/Indexpage(inTXTmode)
30. Image size
31. Mute
32. Program Up / Down
33. Pause
34. Stop
35. Subtitles
36. Rapid advance
37. Blue button
38. Yellow button
Using My button 1 (**)
PressMYBUTTON1forvesecondswhenonadesiredsource,
channel or link, until the “MY BUTTON IS SET” message is displayed
onthescreen.ThisconrmsthattheselectedMYBUTTONisnow
associated with the selected function.
Using My Button 2 (***)
PressMYBUTTON2forvesecondswhenonadesiredsource,
channel or link, until the “MY BUTTON IS SET” message is displayed
onthescreen.ThisconrmsthattheselectedMYBUTTONisnow
associated with the selected function.
www.12volttv.nl