Salora LCD1521TNDVX User manual

LCD -TFT
USER MANUAL (GB)
READ CAREFULLY BEFORE OPERATION
LCD1521TNDVX
LCD1921TNDVX
LCD1922TNDVX
LCD2221TNDVX

Before connecting the AC power cord to the DC adapter outlet ,make sure the
voltage designation of the LCD TV corresponds to the local electrical supply .
If you are unsure of your power supply , ask your local power company .
Never insert anything metallic into the cabinet openings of the liquid crystal
display LCD TV/monitor;otherwise it may create the danger of electric shock.
To avoid electric shock, Never touch the inside of the LCD TV/monitor and adapter.
Only a qualified technician should open the case of the LCD TV/monitor/adapter.
Never use your LCD TV/monitor/adapter if the power cord has been damaged .
Do not allow anything to rest on the power cord, and keep the cord away from
place where people can trip over it .
Be sure to hold the plug, not the cord, when disconnecting the adapter from an
electric socket.
This symbol indicates dangerous voltage inside
the product that presents a risk of electric shock
or personal injury.
This symbol indicates important instructions
accompanying the product.
Please read this manual carefully before using this product.
IMPORTANT SAFETY INSTRUCTIONS
Openings in the LCD TV/monitor/adapter cabinet are provided for ventilation.
To prevent overheating, these openings should not be blocked or covered. Also,
avoid using the LCD TV/monitor on a bed ,sofa ,rug, or other soft surface. Doing
so may block the ventilation openings in the bottom of the cabinet. If you put the
LCD TV/monitor in a bookcase or some other enclosed space, be sure to provide
adequate ventilation.
Do not expose the LCD TV/monitor to extreme temperature conditions or to
extreme humidity conditions.
The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.

Do not place the LCD TV/monitor on an unstable cart, stand, tripod, bracket, table, or
floor where it can fall. It is damaged if dropped, hit or scratched. Do not clean the front
with keton-type materials (e.g.Acetone ),ethyl alcohol, toluene, ethy lacid, methyl, or
chloride-these may damage the panel.
Locate your DC adapter near an easily accessible AC outlet.
If your LCD TV/monitor does not operate normally in particular, if there are any
unusual sounds or smells coming from it unplug it immediately and contact an
authorized dealer or service enter.
，
High temperature can cause problems. Don`t use your LCD TV/monitor in direct
sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat.
Unplug the DC adapter when it is going to be left unused for an extended period of
time .
To reduce the risk of fire or electric shock, and annoying interference, use the
recommended accessories only.
If the LCD TV/monitor is broken, do not try to repair it yourself. Contact qualified
service personnel.
Unplug your DC adapter from the AC outlet before any service.
Be sure the service technician uses authorized replacement parts or their equivalents.
Unauthorized parts may cause fire, electrical shook, or other hazards.
Following any service or repair, be sure the service technician performs safety checks
to certify that your TFT-LCD TV/monitor is in safe operating order.
The apparatus with CLASS I construction shall be connected to a MAINS socket outlet
with a protective earthing connection.
IMPORTANT SAFETY INSTRUCTIONS

CONTENT
EXTERNAL EQUIPMENT
Connecting diagram 2
LET S START'
Switching on 9
Battery installation 8
REMOTE CONTROL
Remote control 3
PANEL BUTTON FUNCTIONS
Front panel 11
Local keyboard panel
Remote buttons (TV mode option) 4
TV OSD MANUAL
First Time installation 11 TV Information 12
Video menu options 13 Audio menu options 14
Setup menu options 14 VGA / HDMI input 17
Timer menu options 18 Function menu options 18
TELETEXT FUNCTION
Teletext function 22
TROUBLESHOOTING
Display troubleshooting 35 Sound and TV troubleshooting 35
Selecting source operation 9
Remote buttons(DVD mode option) 7
DVD OPERATION
Basic operation 24 Supporting DVD format 25
DVD functions operating instructions 26 MP3 / JPEG playback 28
Function settings 29
SPECIFICATIONS
Specifications 36
ACCESSORIES
Accessories 37

PANEL BUTTON FUNCTIONS
1
LOCAL KEYBOARD PANEL (VERSIONS)
TV/AV – select input source
CH+ - increase channel number
CH- - decrease channel number
VOL+ - increase sound volume
VOL- - decrease sound volume
MENU – enter or exit menu
POWER – switch between standby and power-on mode
NEXT – play the next Title / Chapter / track
PREV – play the previous Title / Chapter / track
STOP – stop of play
PLAY\ II – start of play or pause of play
EJECT – take the disk out
FRONT PANEL
Indicator (the indicator is red when in standby mode, and green when in working normally).
IR sensor window
TV+DVD (15,6“, 19“) TV+DVD (22“)
TV/AV NEXT
CH+ PREV
CH- STOP
VOL+ PLAY\ II
VOL- EJECT
MENU
POWER
TV/AV
CH+
CH-
VOL+
VOL-
MENU
POWER
PLAY\ II
EJECT

EXTERNAL EQUIPMENT
2
1. DVD SPDIF output
2. TV signal input
3. Audio Earphone output
4. PC audio input
5. CVBS / S-Video Right
audio input
6. CVBS / S-Video Left
audio input
7. CVBS input
8. S-Video input
9. SCART connecting
teminal
10. PC VGA input
11. HDMI input
12. 12V DC power input
NOTE
You should insert all necessary cables BEFORE plugging in power cord.
DVD or VCR player
CONNECTING DIAGRAM

REMOTE CONTROL
3
1
5
25
29
7
10
13
15
17
19
21
2
424
23
626
8
9
11
14
16
18
20
22
12
27
28
30
31
32
33
34
35
36
37
38
39
40
3

REMOTE CONTROL
4
TV mode option
1. AUTO
Reserved.
2. MUTE
Sound mute switch.
3. NUMBER BUTTONS
Select program number.
4.
( RECALL)
Swap between a previous program and the current program.
5. NICAM
Display program sound information, select NICAM sound channel.
6. CH+
To increase program number.
7. DISPLAY
Display current program information.
8. CH-
To decrease program number.
9.
(UP)
To select upward in the menu or increase channel number.
10.ENTER
Confirm the selection.
11.
(RIGHT)
Move cursor rightward or adjust the selected item in the menu, or increase sound volume.
12.EXIT
Exit or get back to the previous menu.
13.SMODE
To select sound equalizer modes: Personal, Voice, Music, Theatre.
14.SLEEP
Setup the sleep timer.
15.FAV+
Not used .
16.EPG
Not used .
17.LANG
Not used .
18.SUBTITLE
Not used.
19.REVEAL
Display hidden teletext information.
20.SUBPAGE
Open sub-page of teletext.
21.YELLOW
Select a teletext link.
22.BLUE
Select a teletext link.
REMOTE BUTTONS

REMOTE CONTROL
5
23.STANDBY
Switch between standby mode and power-on mode.
24.-/- -
To toggle one-two digits channel number entering mode.
25.ASPECT
Change picture dimensions ratio in sequence: FullScreen, Zoom1, Zoom2, Auto, 4:3, 14:9,
16:9, Subtitle.
26.VOL+
Increase sound volume.
27.VOL-
Decrease sound volume.
28. (LEFT)
Move cursor leftward or adjust the selected item in the menu, or decrease sound volume.
29. (DOWN)
Move cursor upward in the menu, or change the channel.
30.LCD MENU
Open/close user menu.
31.PMODE
Change picture modes in sequence: Standard, Personal, Movie, Sport, Mild, Game.
32.INPUT
Open/close input source selection menu. Use TV option to activate TV mode and
DVD
option – to activate
DVD mode.
33.FAV-
Not used .
34.FAV
Not used .
35.HOLD
Stop teletext on current page.
36.TEXT
Toggle teletext mode between Enabled/Mixed/Disabled.
37.SIZE
Magnify teletext page.
38.INDEX
Display main content page.
39.GREEN
Select a teletext link.
40.RED
Select a teletext link.
REMOTE BUTTONS

REMOTE CONTROL
6
41
45
48
51
55
58
52
56
59
42
44
43
46
47
49
50
53
54
57
60

REMOTE CONTROL
7
REMOTE BUTTONS
DVD mode option
41. (EJECT)
Disk in/out.
42.DVD SETUP
Display DVD setup menu.
43. (PLAY/PAUSE)
Play or pause of playing.
44. (STOP)
Stop of playing.
45. (SLOW MOTION)
Different speeds of playing in sequent.
46. (PREVIOUS)
Play to the last Title / Chapter / Track.
47. (NEXT)
Play to the next Title / Chapter / Track.
48.AUDIO
Toggle between different audio modes in sequent.
49. (BACKWARD)
Toggle between different speeds in sequent.
50. (FORWARD)
Toggle between different speeds in sequent.
51.ANGLE
Change camera angle in DVD mode.
52.ZOOM
Toggle between different zoom modes in sequent.
53.D.MENU
Return to the root menu.
54.TITLE
Return to the title menu.
55.D.DISP
To activate roll-down menu for the current title on screen.
56.GOTO
Play favourite Title / Chapter / Track number.
57.PROG
Program playback.
58.REPEAT
Repeat playback.
59.A-B
To segment repeat.
60.INTRO
Not used.

REMOTE CONTROL
Remove the battery cover. Insert two SUM-4(AAA) batteries matching the -/+ polarities of
the battery to the -/+ marks inside the battery compartment, as follows:
BATTERY LIFE
Normally, battery can be used one year.
If the remote control is still invalid when very near to the TV's remote sensor window,
please use new battery.
Please use SUM-4(AAA) battery.
NOTES
Never use rechargeable battery.
Never charge, short-circuit, disassemble and heat the battery, or throw it into fire.
Pay attention not to fall or knock the remote controller, which will cause damage or
function failure to it.
Do not use new and old battery together.
If electrolyte splashes into body, please clean it with water.
CAUTION：
Please put battery in the place children cannot touch. If swallow by accident, please
contact with the local doctor immediately.
BATTERY INSTALLATION
When not using the remote controller for a long time, please take out battery to avoid
liquid leakage. Before replacing new battery, please clean the electrolyte in the remote
controller.
8

LET S START'
TV
SCART
CVBS
S-VIDEO
VGA
HDMI
DVD
9
After the unit has been suitably placed / fixed, on the desk or on the wall, and all necessary
cables include power have connected, the next you should do is:
•Press the [STANDBY] button on the remote control to make the unit switch to power-on
mode - you will see the LED indicator turn green. Now you can enjoy the many features
of your new TV.
SELECTING SOURCE OPERATION
You can select input source by using source menu.
•Press INPUT button or TV/AV key on the right side of LCD TV to show the menu as
follows:
The current source item is highlighted.
•Through press button on the remote control or CH+/CH- key on the right side
of LCD TV to select your desire, press
button, VOL+ key or ENTER button, to
confirm your choice.

TV

First Time Installation
OK
First Time Installation
YES
First time installation is not finished!
Are you sure to exit?
Do It next time NO
After setting the items, select OK to finish the first time installation, or select Cancel to exit this menu.
If you cancelled the first time installation, it will remind you whether to set the first time installation next time.
Select Adjust
Country
Language
Delete Analog Program
Analog Program Search
OSD MANUAL
11
Cancel
First Time Installation
If this is the first time you open the TV and there is no
programs in the TV memory, the First Time Installation
menu will appear in the picture.
Delete Analog Program
Press ▼ / ▲ button and then use ◄ / ► to select whether to delete all the analog programs.
Analog Program Search
Press ▼ / ▲ button and then use ◄ / ► to select whether to start searching analog programs.
France
English
Country
Press ▼ / ▲ button and then use ◄ / ► to select the country.
Language
Press ▼ / ▲ button and then use ◄ / ► to select the OSD language.

TV Information
25
Auto
No Signal
Auto
Press DISPLAY or NICAM button to display the program information.
1. The number of current program.
2. The colour system of current program, could be selected in Manual Tuning menu(an option of SETUP menu).
3. The name of current program.
4. The label of current program, you can label it in Manual Tuning menu(an option of SETUP menu).
5. The sound system of current program, could be selected in Manual Tuning menu(an option of SETUP menu).
6. The NICAM mode of current program.
1
2
3
5
6
If the icon of NICAM mode is red, it means the current program supplies multi NICAM signals, and you can
select it by pressing NICAM button.
Mono Stereo Dual Dual
The NICAM modes and relative icons:
Program Information
TV Label 4
OSD MANUAL
12

PICTURE
Picture Mode
Contrast
Sharpness
Tint
Colour
Brightness
Standard
50
50
50
0
Normal
Adjust
Contrast 28
PICTURE
Colour
Sharpness
Tint
Colour temperature
DNR
50
0
Normal
Off
Normal
Select Adjust
After adjust the value you want, press LCD-MENU button to return to the preview MENU.
TIPS: You can press PMODE button on the remote control to select the Picture Mode directly.
OSD MANUAL
13
VIDEO menu options
Press MENU button on the front panel or LCD-MENU on the remote control to display the main menu.
4. When you are satisfied with your adjustment, pre-
ss the LCD-MENU button to return to the previous menu
or press the EXIT button to exit the main menu.
1. Press ◄ / ► button to select PICTURE in the main
menu.
2. Press ▼ / ▲ button to select the option that you
want to adjust in the PICTURE menu.
3. Press ◄ / ► button to adjust.
Contrast
Brightness
Colour
Tint
Sharpness
Select Picture Mode in PICTURE menu. (Available picture mode: Standard, Personal, Movie, Sport, Mild, Game.)
If you change the value of Contrast, Brightness, Colour, Tint , Sharpness or Colour temperature on the picture menu, the
picture mode will be changed to "Personal" automatically. You may select the picture mode directly by pressing PMODE
button.
Picture Mode
NOTE: This option is invalid in PC mode, and it will be shown in gray.
Press ▼ / ▲ button and then use ◄ / ► to adjust the colour saturation.
Press ▼ / ▲ button and then use ◄ / ► to adjust the contrast of the picture.
Press ▼ / ▲ button and then use ◄ / ► to adjust the brightness of the picture.
Press ▼ / ▲ button and then use ◄ / ► to adjust the tone of colour when your system is in NTSC.
Press ◄ / ► t
TV. (Available Sharpness Mode: Normal,Sharp,
Sharpest, Softest, Soft.)
o select the sharpness mode of your
Colour temperature
Select an optimum colour temperature mode to suit your
eyes for viewing among Normal, Warm and Cold.
DNR (Digital Noise Reduction)
If the broadcast signal received is weak, you can select
the DNR option to reduce the video noise level between
Off, Low,Mid and High.
Select

SOUND
Volume
Sound Mode
Balance
Treble
Bass
Personal
28
0
0
0
Adjust
Volume 28
After adjust the value you want, press LCD-MENU button to return to the preview MENU.
TIPS: You can press SMODE button on the remote control to select the Sound Mode directly.
Press MENU button on the front panel or LCD-MENU on the remote control to display the main menu.
Setup menu options
SETUP
Country
Auto tuning
Manual tuning
Program Edit
UK
Select Adjust
Press MENU button on the front panel or LCD-MENU on the remote control to display the main menu.
OSD MANUAL
14
AUDIO menu options
Volume
Sound Mode
Select Sound Mode in SOUND menu. (Available sound mode: Peraonal, Voice, Music, Theatre.)
If you change the value of Bass and Treble on the Sound menu, the sound mode will be changed to "Personal" automatically.
You may select the sound mode directly by pressing SMODE button .
Bass
4. When you are satisfied with your adjustment, press
the LCD-MENU button to return to the previous menu
or press the EXIT button to exit the main menu.
1. Press the ◄ / ► button to select SOUND in the
main menu.
2. Press the ▼ / ▲ button to select the option that you
want to adjust in the SOUND menu.
3. Press the ◄ / ► button to adjust.
Press ▼ / ▲ button and then use ◄ / ► to adjust the sound level.
Balance
Press ▼ / ▲ button and then use ◄ / ► to adjust the audio output between left and right speakers.
Press ▼ / ▲ button and then use ◄ / ► to increase or decrease the level of the lower-pitched sounds.
Treble
Press ▼ / ▲ button and then use ◄ / ► to increase or decrease the level of the higher-pitched sounds.
Select

Note: Before you perform Auto Tuning, you must choose the country where you are by selecting COUNTRY option.
Auto tuning
This option allows you to tune the channels that can be received automatically.
Auto Tuning
Press ENTER key to start.
Press ENTER key to start.
Enter Return
ENTER MENU
Exit
Manual tuning
Program
Sound System
Colour System
Manual Search
Program Label
AFT
1
Auto
Auto
Off
471.25 MHz
Select Adjust
OSD MANUAL
15
Auto Tuning
Searching
6
4. When you are satisfied with your adjustment, press the LCD-MENU button to return to the previous menu or press the
EXIT button to exit the main menu.
1. Press the ◄ / ► button to select SETUP in the main menu.
2. Press the ▼ / ▲ button to select your option what you want to adjust in the SETUP menu.
3. Press the ◄ / ► button to adjust.
MENU
ATV 215.00MHz
You can press LCD-MENU button to stop auto tuning and close the OSD menu.
Country
This option allows you to select the country.
ManualTuning
This option allows you to perform Manual Tuning.
Note: Before you perform Manual Tuning, you must choose the country where you are by selecting Country option
in the FUNCTION menu.
2. Press ▼ / ▲ to perform your selection, the menu of Manual tuning will display on the screen.
1. Press ◄ / ► to select Manual tuning in SETUP menu.
Program
The current program number. Press ◄ / ► to select the upper or lower program.
Sound System
Press ◄ / ► to select a corresponding sound system, such as DK, L/L’, BG, I.

Program Label
Channel List
Flags ATV
Favourite Move
Skip Lock
1.
2.
3.
4.
5.
6.
7.
8.
x
x
x
x
x
x
x
OSD MANUAL
16
Colour System
Press ◄ / ► to select a corresponding colour system, such as Auto, PAL, SECAM.
AFT (Auto Fine Tune)
Due to weak signals or a wrong antenna configuration, some of the channels may not be tuned to the best reception
condition. AFT function allows you to fine tune channel selected(the frequency of channel is around the value in
Manual Search option.
This option has two functions:
1. Set the frequency of channel for AFT option.
2. Press ► button for 3+ seconds and it will start auto tuning from this frequency.
Manual Search
Program Label
1. Select a channel you want to labeled.
2. Press▼ / ▲ select Program Label in SETUP menu.
3. Press▼ / ▲ to perform your selection. The menu of program label will display as below:
This option allows you to label a channel, you can also relabel the programs have been labeled.
4. Press the numeric buttons to input the numbers directly or press to select the letters.
5. Press ◄ / ► to move the cursor.
6. Press ENTER, LCD-MENU or EXIT button to confirm and return to previous menu.
▼ / ▲
Manual Search ---.--
MHz
1. Press ▼ / ▲ to select Program Edit in SETUP menu.
2. Press ◄ / ► to enter into the sub menu, a channel list will display.
3. Press ▼ / ▲ to select the channel in the list which you would like to sort.
4. Press ► to perform your selection.
5. Press ▼ / ▲ to select the location you would like to place the channel.
6. Press ◄ to perform you selection.
7 . Press LCD-MENU to return to the previous menu or press EXIT to exit.
Program Edit
This function allows you to sort the TV programs according to your preferences, as following: