Samsung series 4 460 User manual

Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/global/register
Model Serial No.
imagine the possibilities
Plasma TV
user manual
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Contacte con SAMSUNG WORLD WIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención
al Cliente
Country Customer Care Center Web Site Address
CANADA 1-800-SAMSUNG (7267864) www.samsung.com/ca
Samsung Electronics Canada Inc., Customer Service 55
Standish Court Mississauga, Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc., Service à la Clientèle
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
U.S.A 1-800-SAMSUNG (7267864) www.samsung.com Samsung Electronics America, Inc. 105 Challenger Road
Ridgefield Park, NJ 07660-0511
BN68-01661A-01
BN68-01661A.indb 1 2008-05-29 오후 5:17:17

English - 2
Important Warranty Information Regarding Television Format Viewing
Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide
screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format,
or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary
graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and
programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos,
web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary
images that exceed the above guidelines can cause uneven aging of PDP Displays that leave subtle, but permanent
burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and primarily display
full screen moving images, not stationary patterns or dark bars.
On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format
selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
U.S.A Only
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third
parties. In particular, this product is licensed under the following US patents: 5,991,715, 5,740,317, 4,972,484, 5,214,678,
5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037,
6,023,490, 5,878,080, and under US Published Patent Application No. 2001-44713-A1.
This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted
for commercial use. The license does not cover any product unit other than this product unit and the license does not
extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in
combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files
conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or
functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
Other countries
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third
parties. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are
granted for commercial use. The license does not cover any product unit other than this product unit and the license does
not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in
combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files
conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or
functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
BN68-01661A.indb 2 2008-05-29 오후 5:17:17

English - 3
User Instructions
Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can
cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to
page 23 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image.
Altitude
The PDP can only operate normally at heights under 6500ft.
Heat on the top of the Plasma TV
The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in
the upper part of the product.
This is normal and does not indicate any defect or operation failure of the product.
However, children should be prevented from touching the upper part of the product.
The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding environment such as
temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require sophisticated
technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact
on the performance of the product.
Avoid operating the TV at temperatures below 5°C (41°F)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders
displayed on the left, right and center of the screen caused by the difference of light emission on
the screen.
Playing a DVD or a game console may cause similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.
Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
BN68-01661A.indb 3 2008-05-29 오후 5:17:17

English - 4
Symbols Press One-Touch
Button
➢
Note
Contents
General Information
■ List of Features ..............................................................5
■Accessories....................................................................5
■Viewing the Control Panel .............................................6
■ Viewing the Connection Panel.......................................7
■Remote Control..............................................................8
■ Installing Batteries in the Remote Control ..................... 9
Connections
■ Connecting VHF and UHF Antennas .............................9
■ Connecting Cable TV...................................................10
■ Connecting a DVD Player or Cable Box / Satellite
receiver (Set-Top Box) via HDMI ................................. 11
■ Connecting a DVD Player or Cable Box / Satellite
receiver (Set-Top Box) via DVI..................................... 11
■ Connecting a DVD Player or Cable Box / Satellite
receiver (Set-Top Box) via Component cables.............12
■ Connecting a Camcorder.............................................12
■ Connecting a VCR .......................................................13
■ Connecting a Digital Audio System..............................14
■ Connecting an Amplier / DVD Home Theater ............14
■ Connecting a PC..........................................................15
Operation
■ Turning the TV On and Off...........................................16
■ Plug & Play Feature.....................................................16
■ Changing Channels .....................................................18
■ Adjusting the Volume ...................................................19
■ Using the TOOLS Button .............................................19
■ Viewing the Display......................................................19
■ Viewing the Menus.......................................................20
■ Memorizing the Channels ............................................20
■ To Select the Source....................................................22
■ To Edit the Input Source Name....................................22
Picture Control
■ Changing the Picture Standard....................................23
■ Customizing the Picture Settings.................................23
■ Adjusting the Detailed Settings ....................................24
■ Conguring Picture Options.........................................26
■ Using the 3D Function ..................................................32
■ Resetting the Picture Settings to the Factory Defaults ...33
Sound Control
■ Changing the Sound Standard ....................................34
■ Customizing the Sound................................................34
■ Setting the TruSurround XT .........................................35
■ Choosing a Multi-Channel Sound (MTS) Track - Digital ..35
■ Choosing a Multi-Channel Sound (MTS) Track - Analog ..36
■ Automatic Volume Control ...........................................36
■ Setting the TV Speakers On/Off .................................37
■ Connecting Headphones (Sold separately) .................37
Channel Control
■ Selecting the Antenna..................................................38
■ Clearing Scrambled Channels - Digital........................38
■ Adding and Erasing Channels .....................................39
■ Viewing the Channel Lists ...........................................40
■ Setting Your Favorite Channels ...................................40
■ Setting the Default Channel List Mode ........................41
■ Labeling Channels .......................................................42
■ Fine Tuning Analog Channels......................................42
■ Checking the Digital-Signal Strength ...........................43
PC Display
■ Using Your TV as a Computer (PC) Display ................ 44
■ Display Modes .............................................................44
■ Setting up the TV with your PC....................................45
Time Setting
■ Setting the Time...........................................................47
Function Description
■ Selecting a Menu Language........................................50
■ Viewing Closed Captions (On-Screen Text Messages) - Digital ... 50
■ Viewing Closed Captions (On-Screen Text Messages) - Analog ..52
■ Adjusting the TV On/Off Melody Sound .......................53
■ Setting the Light Effect.................................................53
■ Setting the Entertainment mode ..................................54
■ Using the Energy Saving Feature................................54
■ Upgrading the Software ...............................................55
■ Using the V-Chip..........................................................56
About Anynet+
■ What is Anynet+?.........................................................64
■ Connecting Anynet+Devices.......................................64
■ Setting Up Anynet+......................................................65
■ Scanning and Switching between Anynet+Devices....65
■ Recording ....................................................................66
■ Listening through a Receiver (Home theater)..............67
■ Check Points before Requesting Service ....................67
Appendix
■ Securing the TV to the Wall .........................................68
■ Troubleshooting ...........................................................69
■ Wall- mount adjustment (Sold separately)...................70
■ Preparing before installing Wall- Mount on the wall..... 71
■ Wall Mount Kit Specications (VESA)..........................72
■ How to assemble the Stand-Base
(depending on the model)............................................73
■ Specications...............................................................73
■ Dimensions (PN50A460S4D) ......................................74
English
BN68-01661A.indb 4 2008-05-29 오후 5:17:18

English - 5
General Information
List of Features
• Adjustable picture settings that can be stored in the TV’s memory.
• Automatic timer to turn the TV on and off.
• A special sleep timer.
• V-Chip function.
• Excellent Digital Interface & Networking :
With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Set-Top Box needed.
• Excellent Picture Quality
- DNIe technology provides life-like clear images.
• SRS TruSurround XT
- SRS TruSurround XT provides a virtual Dolby surround system.
• HDMI/DVI connection of your PC to this TV.
Accessories
Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
Remote Control (BN59-00687A) /
AAA Batteries (4301-000103)
Power Cord
(3903-000144)
Owner’s Instructions /
Quick Setup Guide
Ferrite Core for Headphone
(3301-001456)
Cover-Bottom / Screws (2ea)
(Refer to page 73)
Warranty Card /
Safety Guide Manual
(Not available in all locations)
Cloth-Clean Ferrite Core for Power Cord
(3301-001305 )
The following parts are sold separately and are available at most electronics stores.
➢If you do not use a good quality cable, some noise may appear on the screen.
S-VIDEO Cable (BN39-00149A) HDMI Cable (BN39-00641A) HDMI/DVI cable (BN39-00643A) Component Cables (RCA)
(BN39-00279A)
PC Cable (BN39-00115A) PC Audio Cable (BN39-00061B) Optical Cable Antenna Cable (BN39-00333A)
➢Ferrite Core (Power Cable, Headphone)
The ferrite cores are used to shield the cables from interference.
When connecting a cable, open the ferrite core and clip it around the cable near the plug.
BN68-01661A.indb 5 2008-05-29 오후 5:17:20

English - 6
Viewing the Control Panel
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.
1 SOURCE
Toggles between all the available input sources
(TV, AV1, AV2, S-Video, Component1, Component2,
PC, HDMI1, HDMI2, HDMI3).
➢In the on-screen menu, use this button as you
would use the ENTER button on the remote control.
2 MENU
Press to see an on-screen menu of your TV’s features.
3 + VOL –
Press to increase or decrease the volume. In the on-
screen menu, use the + VOL –buttons as you would
use the ◄and ►buttons on the remote control.
4 CH
Press to change channels.
In the on-screen menu, use the CH buttons as
you would use the ▲and ▼buttons on the remote
control.
5 Power Indicator
Blinks and turns off when the power is on and lights up
in stand-by mode.
6 POWER
Press to turn the TV on and off.
7 Remote Control Sensor
Aim the remote control towards this spot on the TV.
8 Speakers
➢The product color and shape may vary depending on the model. Front Panel buttons
Touch each button to operate.
BN68-01661A.indb 6 2008-05-29 오후 5:17:20

English - 7
Viewing the Connection Panel
Rear Panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For
more information on connecting equipment, see pages 9-15. The product color and shape may vary depending on the model.
1 POWER IN
Connect the supplied power cord.
2 DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio component.
3 AUDIO OUT (R/L)
Audio outputs to external devices.
4 PC IN[PC]/[AUDIO]
Connect to the video and audio output jack on your PC.
5 DVI IN (HDMI 2) (AUDIO-R/L)
Connect to the DVI audio output jack of an external device.
6 HDMI IN 1, 2
Connect to the HDMI jack of a device with an HDMI
output. (HDMI2 supports HDMI-DVI IN and connection
from a PC.)
- This input can also be used as a DVI connection with
separate analog audio inputs. An optional HDMI/DVI
cable will be necessary to make this connection.
-
When using an optional HDMI/DVI adapter, the DVI
analog audio inputs on your TV allow you to receive left
and right audio from your DVI device.
7 ANT IN
Uses a 75Ω Coaxial connector for an Air/Cable
Network.
8 SERVICE
For service only.
9 3D SYNC OUT
Connect to 3D IR Emitter.
0 COMPONENT IN 1, 2 / AV IN 1
Connects Component video/audio.
The COMPONENT IN 1 jack is also used as the AV IN 1
jack.
- Connect the video cable to the COMPONENT IN 1 [Y/
VIDEO] jack and the audio cable to the COMPONENT IN
[R-AUDIO-L] jacks.
! EX-LINK
Connect this to the jack on the optional wall mount
bracket. This will allow you to adjust the TV viewing
angle using your remote control.
Side Panel Jacks
Use the right side panel jacks to connect a component that is used only occasionally, such as a camcorder or video game.
The product color and shape may vary depending on the model.
1 HDMI IN 3
Connect to the HDMI jack of a device with HDMI output.
2 S-VIDEO (AV IN 2)
S-Video input for external devices with an S-Video output.
3 AV IN 2
Video and audio inputs for external devices.
4 HEADPHONE
You can connect a set of headphones if you wish to watch a television program without
disturbing other people in the room.
HDMI IN 3
BN68-01661A.indb 7 2008-05-29 오후 5:17:21

English - 8
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
➢The performance of the remote control may be affected by bright light.
1 POWER
Turns the TV on and off.
2 TV
Selects the TV mode directly.
3 NUMERIC BUTTONS
Press to directly select a channel.
4 –
Press to select additional channels
(digital and analog) being
broadcast by the same station. For
example, to select channel “54-3”,
press “54”, then press “–” and “3”.
5 MUTE
Press to temporarily cut off the
sound.
6 VOL
Press to increase or decrease the
volume.
7 CH LIST
Used to display Channel Lists on
the screen.
8 TOOLS
Use to quickly select frequently
used functions.
9 UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTER
Use to select on-screen menu
items and change menu values.
0 INFO
Press to display information on the
TV screen.
! COLOR BUTTONS
Use these buttons in the Channel
list.
@ SRS
Selects SRS TruSurround XT mode.
# E.MODE
Press to select the preset display
and sound modes for sports,
cinema and games.
$ Use these buttons in the DMA and
Anynet+ modes.
( : This remote can be used
to control recording on Samsung
recorders with the Anynet+ feature)
% SOURCE
Press to display all of the available
video sources.
^ PRE-CH
Tunes to the previous channel.
& CH
Press to change channels.
* CC
Controls the caption decoder.
( MENU
Displays the main on-screen menu.
) RETURN
Returns to the previous menu.
a EXIT
Press to exit the menu.
b MTS
Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).
c DMA (Digital Media Adapter)
Use this when connecting a
Samsung DMA device through an
HDMI interface and switching to
DMA mode.
For more information on the
operating procedures, refer to the
user manual of the DMA.
➢This button is available when
“Anynet(HDMI-CEC)” is “On”.
(see page 65)
d FAV.CH
Press to switch to your favorite
channels.
e P.SIZE
Press to change the screen size.
BN68-01661A.indb 8 2008-05-29 오후 5:17:22

English - 9
Connections
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see “Antennas with 300 Ω Flat
Twin Leads” below.
If your antenna has one lead that looks like this, see “Antennas with 75 Ω Round
Leads”.
If you have two antennas, see “Separate VHF and UHF Antennas”.
Antennas with 300 Ω Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that
has 300 Ω twin flat leads, follow the directions below.
1 Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not
supplied).
Use a screwdriver to tighten the screws.
2Plug the adaptor into the ANT IN terminal on the back of the TV.
Antennas with 75 Ω Round Leads
1 Plug the antenna lead into the ANT IN terminal on the back of the TV.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires an optional combiner-adaptor (available at most electronics
shops).
1Connect both antenna leads to the combiner.
2Plug the combiner into the ANT IN terminal on the bottom of the back panel.
Installing Batteries in the Remote Control
1 Lift the cover at the back of the remote control upward as shown in the figure.
2 Install two AAA size batteries.
➢Make sure to match the “+” and “–” ends of the batteries with the diagram inside the
compartment.
➢Do not mix battery types, i.e. alkaline and manganese.
3 Close the cover as shown in the figure.
➢
Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time. The remote control can be used up to about 23 feet
(7m) from the TV. (Assuming typical TV usage, the batteries last for about one year.)
➢If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
ANT IN
ANT IN
UHF
VHF
ANT IN
UHF
VHF
BN68-01661A.indb 9 2008-05-29 오후 5:17:23

English - 10
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1 Plug the incoming cable into the ANT IN terminal on the back of the TV.
➢Because this TV is cable-ready, you do not need a cable box to view
unscrambled cable channels.
1 Find the cable that is connected to the ANT OUT terminal on your cable box.
➢This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
2 Connect the other end of this cable to the ANT IN terminal on the back of the TV.
Connecting to a Cable Box that Descrambles All Channels
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below.
You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available
at most electronics stores.)
1 Find and disconnect the cable that is
connected to the ANT IN terminal on your
cable box.
➢This terminal might be labeled “ANT
IN”, “VHF IN” or simply, “IN”.
2 Connect this cable to a two-way splitter.
3 Connect an Antenna cable between an
OUTPUT terminal on the splitter and the IN
terminal on the cable box.
4 Connect an Antenna cable between the
ANT OUT terminal on the cable box and the
B–IN terminal on the RF(A/B) switch.
5 Connect another cable between the other
OUT terminal on the splitter and the A–IN
terminal on the RF (A/B) switch.
6 Connect the last Antenna cable between
the OUT terminal on the RF (A/B) switch
and the ANT IN terminal on the rear of the
TV.
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B”
position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)
ANT OUT
ANT IN
ANT IN
ANT IN
Splitter
Cable Box
RF (A/B)
Switch
Incoming
cable
Splitter
Incoming
cable
Splitter
Cable Box
Incoming
cable
Splitter
Incoming
cable
TV Rear
RF (A/B)
Switch
ANT IN
ANT IN
Splitter
Incoming
cable
RF (A/B)
Switch
Cable Box
BN68-01661A.indb 10 2008-05-29 오후 5:17:23

English - 11
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI
This connection can only be made if there is an HDMI Output jack on the external device. This connection will
provide the highest quality picture.
1 Connect an HDMI Cable
between the HDMI IN(1, 2
or 3) jack on the TV and the
HDMI jack on the DVD Player
or Cable Box / Satellite
receiver (Set-Top Box).
What is HDMI?
• HDMI, or high-definition multimedia interface, is an interface that enables the
transmission of digital audio and video signals using a single cable without
compression.
• The difference between HDMI and DVI is that the HDMI device is smaller in size and
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed.
➢Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different
back panel configuration.
➢When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box),
match the color of the connection terminal to the cable.
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via DVI
This connection can only be made if there is a DVI Output jack on the external device.
1 Connect a HDMI/DVI Cable
or DVI-HDMI Adapter
between the HDMI IN 2 jack
on the TV and the DVI jack
on the DVD Player or Cable
Box/Satellite receiver (Set-
Top Box).
2 Connect Audio Cables
between the DVI IN (HDMI 2)
[R-AUDIO-L] jack on the TV
and the AUDIO OUT jacks
on the DVD Player or Cable
Box/Satellite receiver (Set-
Top Box).
➢Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different
back panel configuration.
➢When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box),
match the color of the connection terminal to the cable.
➢ When using an HDMI / DVI cable connection, you must use the HDMI IN 2 jack.
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
TV Rear Panel
Audio Cable (Not supplied)2
HDMI/DVI Cable (Not supplied)1
HDMI Cable (Not supplied)
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
TV Rear Panel TV Side Panel
or
BN68-01661A.indb 11 2008-05-29 오후 5:17:24

English - 12
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
1 Connect a Video Cable
(or S-Video Cable) between
the AV IN 2 [VIDEO]
(or S-VIDEO) jack on the TV
and the VIDEO OUT jack on
the Camcorder.
2 Connect Audio Cables
between the AV IN 2
[L-AUDIO-R] jacks on the TV
and the AUDIO OUT jacks on
the Camcorder.
➢Each Camcorder has a different back panel configuration.
➢
When connecting a Camcorder, match the color of the connection terminal to the cable .
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables
The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box / Satellite receiver (Set-Top
Box) to your TV.
1 Connect Component Cables
between the COMPONENT
IN (1 or 2) [Y, PB, PR]
jacks on the TV and the
COMPONENT [Y, PB, PR]
jacks on the DVD Player or
Cable Box / Satellite receiver
(Set-Top Box).
2 Connect Audio Cables
between the COMPONENT
IN (1 or 2) [R-AUDIO-L] jacks
on the TV and the AUDIO
OUT jacks on the DVD Player
or Cable Box / Satellite
receiver (Set-Top Box).
➢ Component video separates the video into Y (Luminance (brightness)), PB
(Blue) and PR(Red) for enhanced video quality. Be sure to match the component
video and audio connections. For example, if connecting the video cable to
COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also.
➢Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different
back panel configuration.
➢When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box),
match the color of the connection terminal to the cable.
DVD Player or Cable Box/
Satellite receiver (Set-Top Box)
TV Rear Panel
Audio Cable (Not supplied)
2
Component Cable (Not supplied)1
Camcorder
TV Side Panel
S-Video Cable(Not supplied)
1
Video Cable (Not supplied)1
Audio Cable (Not supplied)2
or
BN68-01661A.indb 12 2008-05-29 오후 5:17:25

English - 13
Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according
to the instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system.
➢ If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to
connect to the right and left audio input jacks of the TV. Alternatively, connect the
cable to the “R” jack.
If your VCR is stereo, you must connect two cables.
➢Each VCR has a different back panel configuration.
➢When connecting a VCR, match the color of the connection terminal to the cable.
➢ When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does
not match the color of the video cable (Yellow).
VCR Rear Panel
TV Rear Panel
2
Audio Cable(Not supplied)5
Video Cable(Not supplied)4
Antenna cable(Not supplied)3
TV Side Panel
1 Unplug the cable or antenna
from the back of the TV.
2 Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
3 Connect an Antenna Cable
between the ANT OUT
terminal on the VCR and the
ANT IN terminal on the TV.
4Connect a Video Cable
between the VIDEO OUT
jack on the VCR and the AV
IN 1 [Y/VIDEO] or AV IN 2
[VIDEO] jack on the TV.
5Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the AV
IN 1 (or AV IN 2) [R-AUDIO-L]
jacks on the TV.
S-Video Connection
Your Samsung TV can be connected to an S-Video jack on a VCR.
(This connection delivers a better picture as compared to a standard VCR.)
1 To begin, follow steps 1–3
in the previous section to
connect the antenna or cable
to your VCR and your TV.
2 Connect an S-Video Cable
between the S-VIDEO OUT
jack on the VCR and the AV
IN 2 [S-VIDEO] jack on the
TV.
3 Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the AV
IN 2 [R-AUDIO-L] jacks on
the TV.
An S-Video may be included with your VCR. (If not, check your local electronics store.)
➢Each VCR has a different back panel configuration.
➢When connecting a VCR, match the color of the connection terminal to the cable.
VCR Rear Panel
TV Rear Panel
Audio Cable (Not supplied)
3
S-Video Cable(Not supplied)2
Antenna cable(Not supplied)1
TV Side Panel
BN68-01661A.indb 13 2008-05-29 오후 5:17:27

English - 14
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System(Home theater/Receiver) to your
TV.
1 Connect an Optical Cable
between the DIGITAL AUDIO
OUT (OPTICAL) jacks on
the TV and the Digital Audio
Input (OPTICAL) jacks on the
Digital Audio System.
When a Digital Audio System
is connected to the DIGITAL
AUDIO OUT (OPTICAL)
terminal:
Decrease the volume of the
TV, and adjust the volume
level with the system’s
volume control.
What is OPTICAL?
• Converts the electric signal into an optical light signal, and transmits it through glass
fibers. S/PDIF is a transmission system of digital audio in the form of a light wave
that uses a glass conductor.
➢5.1CH audio is possible when the TV is connected to an external device
supporting 5.1CH.
➢Each external input source device has a different back panel configuration.
➢When the receiver (home theater) is set to On, you can hear sound output from
the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send
out 5.1 channel sound to the Home theater receiver. When the source is a digital
component such as a DVD and is connected to the TV via HDMI, only 2 channel
sound will be heard from the Home Theater receiver.
Digital Audio System
TV Rear Panel
Optical Cable (Not supplied)
Connecting an Amplifier / DVD Home Theater
1 Connect Audio Cables
between the AUDIO OUT
[R-AUDIO-L] on the TV and
AUDIO IN [L-AUDIO-R] on
the Amplifier / DVD Home
Theater.
When an audio amplifier is
connected to the AUDIO OUT
[R-AUDIO-L] jacks terminals:
Decrease the volume of the
TV, and adjust the volume
level with the Amplifier’s
volume control.
➢Each Amplifier / DVD Home Theater has a different back panel configuration.
➢When connecting an Amplifier / DVD Home Theater, match the color of the
connection terminal to the cable.
Amplifier / DVD Home Theater
TV Rear Panel
Audio Cable (Not supplied)
BN68-01661A.indb 14 2008-05-29 오후 5:17:28

English - 15
Connecting a PC
Using the D-Sub Cable
1 Connect a D-Sub Cable
between PC IN [PC] jack on
the TV and the PC output
jack on your computer.
2 Connect a PC Audio Cable
between PC IN [AUDIO] jack
on the TV and the Audio Out
jack of the sound card on
your computer.
Using the HDMI/DVI Cable
1 Connect a HDMI/DVI cable
between the HDMI IN 2 jack
on the TV and the PC output
jack on your computer.
2 Connect a 3.5mm Stereo/
2RCA cable between the DVI
IN (HDMI 2) [R-AUDIO-L] jack
on the TV and the Audio Out
jack of the sound card on your
computer.
➢Each PC has a different back panel configuration.
➢When connecting a PC, match the color of the connection terminal to the cable.
➢When using an HDMI/DVI cable connection, you must use the HDMI IN 2 terminal.
PC
TV Rear Panel
PC Audio Cable (Not supplied)2
D-Sub Cable (Not supplied)
1
Using the D-Sub Cable
Using the HDMI/DVI Cable
TV Rear Panel
PC
3.5 mm Stereo plug to 2 RCA Cable (Not supplied)2
HDMI/DVI Cable (Not supplied)1
BN68-01661A.indb 15 2008-05-29 오후 5:17:29

English - 16
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢It may take a while before you see a full picture.
Plug & Play Feature
When the TV is initially powered On, basic settings proceed automatically and subsequently:
➢ The Screen Saver is activated if there is no operating signal for longer than 15 minutes.
1 Press the POWER button on the remote control.
The message Menu language, Store Demo, Channels and Time will be set.
is displayed.
2 Press the ENTER button to enter the language.
Press the ▲ or ▼ button to select language, then press the ENTER button.
The message Select “Home Use” when installing this TV in your home. is
automatically displayed.
3 Press the ◄ or ► button to select Store Demo or Home Use, then press the
ENTER button.
➢We recommend setting the TV to Home Use mode for the best picture in
your home environment.
➢Store Demo mode is only intended for use in retail environments.
➢If the unit is accidentally set to Store Demo mode and you want to return to
Home Use (Standard) : Press the Volume button. While the volume OSD is
displayed, press and hold the MENU button for 5 seconds.
➢ The Screen Saver is activated if there is no remote control key input for
longer than 1 minute while Plug & Play is running.
4 Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the ENTER button to select Start.
➢Air : Air antenna signal.
Cable : Cable antenna signal.
Auto : Air and Cable antenna signals.
➢In Cable mode, you can select the correct analog signal source among
STD, HRC, and IRC by pressing the ◄ or ► button, then press the ENTER
button. If you have Digital cable, select the signal source for both Analog and
Digital. Contact your local cable company to identify the type of cable system
that exists in your particular area.
Continued...
Select “Home Use” when installing this TV in
your home.
Plug & Play
Store Demo Home Use
Enter
Move
Select the language of the OSD.
Language :
Plug & Play
English
Español
Français
Enter
Move
Menu language, Store Demo,
Channels and Time will be set.
i
Start
Enter
Plug & Play
Select the antenna to memorize.
Air
Cable
Auto
Plug & Play
Start
Start
Enter Skip
Move
Start
Plug & Play
Enter Skip
Move
Selects a cable signal type for your location.
Start
STD
HRC
IRC
Analog
STD
HRC
IRC
Digital
BN68-01661A.indb 16 2008-05-29 오후 5:17:30

English - 17
5 The TV will begin memorizing all of the available channels.
➢To stop the search before it has finished, press the ENTER button with Stop
selected.
After all the available channels are stored, the TV starts to remove scrambled
channels(see page38). The Auto program menu then reappears.
Press the ENTER button when channel memorization is complete.
Clock Mode menu is automatically displayed.
6 Press the ENTER button.
Press the ▲ or ▼ button to select Manual if you want to set the current time
manually, then press the ENTER button. Enter the current date and time. is
displayed.
➢ If you select Auto, Set to daylight savings time. is displayed, then go to
step 9.
7 Press the ◄ or ► button to move to Month, Day, Year, Hour, Minute, or
am/pm. Set the date and time you want by pressing the ▲ or ▼ button,
then press the MENU button.
➢ You can set the Month, Day, Year, Hour, and Minute directly by pressing
the number buttons on the remote control.
8 The message Enjoy your watching. is displayed.
When you have finished, press the ENTER button.
➢Even if the ENTER button is not pressed, the message will automatically
disappear after several seconds.
Setting the Clock Automatically
9 Press the ENTER button.
Press the ▲ or ▼ button to select On or Off, then press the ENTER button.
The Select the time zone in which you live. menu is automatically displayed.
10 Press the ▲ or ▼ button to highlight the time zone for your local area (and
to move the highlight to the appropriate time zone on the map of the United
States).
Press the ENTER button.
If clock is not automatically set, see page 48 to set the clock.
11 The message Enjoy your watching. is displayed.
When you have finished, press the ENTER button.
➢Even if the ENTER button is not pressed, the message will automatically
disappear after several seconds.
Continued...
Select the Clock mode.
Clock Mode :
Plug & Play
Auto
Manual
Enter Skip
Move
Set to daylight saving time.
DST :
Plug & Play
Off
On
Enter Skip
Move
Select the time zone in which you live.
Plug & Play
Newfoundland
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
Enter Skip
Move
Plug & Play
Enter the current date and time.
MoveAdjust Enter Skip
Month YearDay
Hour am/pmMinute
01 01 2008
30 am
05
Enjoy your watching.
i
OK
Enter
Plug & Play
Enjoy your watching.
i
OK
Enter
Plug & Play
Auto Program
Auto program is completed.
93 channels are memorized
DTV Air : 16 Air : 23
DTV Cable : 13 Cable : 21
OK
Enter Skip
Auto Program
Removing scrambled channel.
DVD Cable 3-1
68%
Stop
Enter Skip
Auto Program
Auto Program in Progress.
DTV Air : 5 Air : 3
DTV Cable : -- Cable : --
Stop
Enter Skip
Air 67
68%
BN68-01661A.indb 17 2008-05-29 오후 5:17:31

English - 18
If you want to reset this feature...
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ENTER button to select Plug & Play. For further details on setting up
options, refer to the pages 16~17.
➢ The Plug & Play feature is only available in the TV.
Changing Channels
Using the Channel Buttons
1 Press the CH or CH button to change channels.
➢When you press the CH or CH button, the TV changes channels in
sequence. You will see all the channels that the TV has memorized.
(The TV must have memorized at least three channels). You will not see
channels that were either erased or not memorized. See pages 20-21 to
memorize channels.
Using the Number Buttons
1 Press the number buttons to go directly to a channel. For example, to select
channel 27, press 2, then 7.
The TV will change channels when you press the second number.
➢For quick channel change, press the number buttons, then press the ENTER
button.
Using the “-” Button
The “ ” button is used to select stations that broadcast a digital signal.
1 For example, for Channel 7-1, press 7, then , then 1.
➢HD indicates the TV is receiving a Digital High Definition signal.
SD indicates the TV is receiving a Standard Definition signal.
➢For quick channel change, press the number buttons, then press the ENTER
button.
Using the PRE-CH Button to select the Previous Channel
Use the number buttons to quickly tune to any channel.
1 Press the PRE-CH button. The TV will switch to the last channel viewed.
➢To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel.
Then use the PRE-CH button to quickly alternate between them.
Plug & Play ►
Language : English ►
Time ►
V-Chip ►
Caption ►
External Settings ►
Entertainment : Off ►
▼
More
Setup
T V
Move Return
Enter
Menu language, Shop Mode,
Channels and Time will be set.
i
Start
Plug & Play
Return
Enter
BN68-01661A.indb 18 2008-05-29 오후 5:17:32

English - 19
Adjusting the Volume
Using the Volume Buttons
1 Press the VOL or VOL button to increase or decrease the volume.
Using the Mute Button
At any time, you can cut off the sound using the MUTE button.
1 Press MUTE and the sound cuts off.
Mute will displayed on the screen.
2 To turn mute off, press the MUTE button again, or simply press the VOL or
VOL button.
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu
changes depending on which external input mode you are viewing.
1Press the TOOLS button.
The Tools menu will appear.
2 Press the ▲/▼ button to select a menu, then press the ENTER button.
3 Press the ▲/▼/◄/►/ENTER buttons to display, change, or use the selected
items.
For a more detailed description of each function, refer to the corresponding
page.
• Anynet+(HDMI-CEC), see page 65
• Picture Mode, see page 23
• Sound Mode, see page 34
• Sleep Timer, see page 49
• Add to Favorite, see page 40
• Switch to Cable, see page 20
• Auto Adjustment, see page 45
Viewing the Display
The display identifies the current channel and the status of certain audio-video settings.
1 Press the INFO button on the remote control.
The TV will display the channel, the type of sound, and the status of certain
picture and sound settings.
Press the INFO button once more or wait approximately 10 seconds and it disappears
automatically.
Air 3
Mono
Picture Mode : Standard
Sound Mode : Custom
MTS : Mono
V-Chip : Off
Caption : Off
7 : 30 am
Tools
Anynet+(HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
Add to Favorite
Switch to Cable
Enter Exit
Move
BN68-01661A.indb 19 2008-05-29 오후 5:17:32

English - 20
1 With the power on, press the MENU button.
The main menu appears on the screen. Its left side has five icons:
Picture, Sound, Channel, Setup, Input.
2 Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s sub-menu.
3 Press the EXIT button to exit.
➢It takes about one minute until the on-screen menu disappears.
Viewing the Menus
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (air) and cable channels. After the
available channels are memorized, use the CH or CH button to scan through the channels. This eliminates
the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (Channel
Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air or a Cable
system).
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
2 Press the ENTER button to select Antenna.
Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button.
Press the EXIT button to exit.
Easy Setting
1Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Switch to Cable or Switch to Air, then press
the ENTER button.
Continued...
Antenna : Air ►
Auto Program ►
Clear Scrambled Channel ►
Channel List ►
Name ►
Fine Tune ►
Signal Strength ►
ChannelT V
Enter
Move Return
Antenna : Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
ChannelT V
Enter
Move
Air
Cable
Return
Mode : Standard ►
Cell Light 7
Contrast 80
Brightness 45
Sharpness 50
Color 50
Tint G 50 R 50
▼
More
PictureT V
Enter
Move Exit
Tools
Anynet+(HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
Add to Favorite
Switch to Cable
Enter Exit
Move
BN68-01661A.indb 20 2008-05-29 오후 5:17:33