Samsung OfficeServ 7200 User manual

OfficeServ 7200
Installation
Guide
Enterprise IP Solutions

Publication Information
Samsung Business Communications reserves the right without prior notice to revise information
in this publication for any reason.
Samsung Business Communications also reserves the right without prior notice to make
changes in design or components of equipment as engineering and manufacturing may warrant.
Disclaimer
Samsung Business Communications is not responsible for errors or problems arising from
customers not installing, programming or operating their Samsung systems as described in this
manual.
Copyright2005
Samsung Business Communications
All rights reserved. No part of this manual may be reproduced in any form or by any means –
graphic, electronic or mechanical, including recording, taping, photocopy or information retrieval
system – without express written permission of the publisher of this material.
2005/09/OS7200(IG) Version1.1

EU Declaration ofConformity(RTTE)
Samsung Electronics Co., Ltd.
259 Gongdan-Dong, Gumi-CityKyungbuk,Korea,730-030
(factoryname,address)
declareunderoursoleresponsibilitythattheproduct
DigitalKeyphoneSystem"OfficeServ 7200"/ IP MODEM "LXM-300Q"
towhichthisdeclarationrelatesisinconformitywith
RTTEDirective 1999/5/EC(AnnexII)
LowVoltageDirective73/23/EEC:93/68/EEC
EMC Directive 89/336/EEC:92/31/EEC
By applicationof thefollowingstandards
TBR3 November 1995 as amended by TBR3 A1 December 1997
EN55022 : 1998 + A1 + A2:2003, EN61000-3-2:2000
EN61000-3-3 : 1995 + A1:2001, EN61000-4-2 : 1995
EN61000-4-3 : 1995, EN61000-4-4 : 1995, EN61000-4-5 : 1995
EN61000-4-6 : 1996, EN61000-4-11 : 1994
EN 60950-1:2001, First Edition
(Manufacturer)
SamsungElectronics Co., Ltd
259,Gongdan-Dong,Gumi-City
Kyungbuk,Korea, 730-030
Tae-eok Jang/ GeneralManager
................................................. .................................................................................
(placeanddateofissue)(nameand signatureofauthorizedperson)
(Representative intheEU)
SamsungElectronics EuroQALab.
BlackbusheBusiness Park
SaxonyWay,Yateley,Hampshire
GU46 6GG, UKPeter Park /Manager
................................................. ...............................................................................
(place and date ofissue) (name andsignature ofauthorized person)
TEJang
2005-08-01
Peter Park
2005-08-01

Intended Use
This telephone system is intended to provide the user with voice communication between the system
extensions and connection to the public switched telephone network by digital or analogue links.
The telephone system may be provided with the ability to communicate with local computer networks to
provide CTI functions and features. In this case, it is capable of passing information to the computer network
via a specified link.
The system is powered by mains voltage and can optionally be powered by batteries. Details of all
connections and power arrangements are provided in the instructions for use. It should not be used in any
other way.

INTRODUCTION
© Samsung Business Communications Page I
Purpose
This guide provides all the information required for installing the Samsung Office-
Serv 7200 keyphone system. This includes: installing chassis; mounting and replac-
ing modules; connecting external batteries, power, C.O. lines, stations and addi-
tional equipment; and starting the system.
Guide Content and Organization
This guide consists of eight chapters:
CHAPTER 1. Pre-Installation Information
Describes how to inspect the intended installation site and check the grounding and
power conditions before installing the OfficeServ 7200 system. Also describes the
items included in the OfficeServ 7200 package.
CHAPTER 2. Installing Chassis
Describes how to install the OfficeServ 7200 chassis on the floor, inside a special
rack or on a wall, depending on the installation environment, and how to adequately
ground the system.
CHAPTER 3. Mounting and Replacing Modules
Describes how to mount and replace the various system modules.
CHAPTER 4. Connecting External Batteries
Describes how to connect external batteries to the system.
CHAPTER 5. Connecting Power
Describes how to connect power to the system.
CHAPTER 6. Connecting C.O. Lines
Describes how to connect C.O. lines to the system.
CHAPTER 7. Connecting Stations and Additional Equipment
Describes how to connect stations and additional equipment, such as analogue /
digital phones, door phones and door locks, to the system.

Introduction OfficeServ 7200 Installation Guide
Page II © Samsung Business Communications
CHAPTER 8. Starting the System
Describes checklist procedures prior to starting the OfficeServ 7200 system, the start-up
procedure itself, and the procedure for testing that the system is operating normally after
startup.
ABBREVIATIONS
Explains the acronyms and abbreviations used in the guide.
Conventions
The following special paragraphs are used in this guide.
WARNING
Provides information or instructions you should follow in order to avoid personal in-
jury or fatality.
CAUTION
Provides information or instructions you should follow in order to avoid a service
failure or damage to the system.
CHECKPOINT
Provides you with checkpoints for ensuring stable system operation.
NOTE
Indicates additional information as a reference.
OPERATION PROCEDURES
Indicates the operational procedures that should be executed in sequence.

OfficeServ 7200 Installation Guide Introduction
© Samsung Business Communications Page III
References
OfficeServ 7200 General Description Guide
This guide comprehensively describes the Samsung OfficeServ 7200 hardware con-
figurations, specifications and functions for a complete understanding of the system
and its capabilities.
TRADEMARKS
Product names mentioned in this document may be trademarks and/or registered trademarks of their respec-
tive companies.

SAFETY CONCERNS
© Samsung Business Communications Page V
SAFETY CONCERNS
For product safety and correct operation, read the following information carefully
before starting the installation.
Symbols
The following symbols indicate important information throughout the guide which
should be adhered to.
Caution
A general caution
Restriction
Prohibits an action
Instruction
A specific action is required

Safety Concerns OfficeServ 7200 Installation Guide
Page VI © Samsung Business Communications
Warning
Grounding
- Do not connect the grounding wire of the OfficeServ 7200 system to a power con-
duit of a building.
- The standards for power and grounding should comply with the country standard
and the pertinent work should be carried out according to the country standard.
- External grounding is required to prevent personal injury or system damage
caused by lightning, static electricity, or voltage surge.
- The separate protective earthing terminal should be permanently connected to
earth.
- Double-pole/neutral fusing.
AC Power Connection
- The system and each module should be installed by a qualified service engineer.
- The system should be connected to a grounded outlet.
- Do not operate other devices with theAC power of the system or with the DC
power of external batteries.
Power Selector Switch
Do not use the power selector switch.
Check the power when mounting or ejecting modules
Ensure the chassis power is off when mounting or ejecting a module in a slot. In-
serting or ejecting a module while the power is on may damage the module.
Connecting grounding wires
Disconnect the AC power before connecting grounding wires to prevent injury.
WARNING

OfficeServ 7200 Installation Guide Safety Concerns
© Samsung Business Communications Page VII
Caution
Maximum number of DS-5012L phones
Up to eight DS-5012L phones can be connected to each DLI module (8DLI/16DLI).
If more than eight are connected to the DLI module, the power provided to all digital
phones connected to the same module is turned off automatically. Up to 24 DS-
5012L phones can be connected to the basic chassis or the expansion chassis.
Metal Accessories
Do not wear metal accessories such as rings and watches during installation to pre-
vent electrical damage to the system.
Module Reset
New settings are applied only after the module is reset. The system may malfunc-
tion if the module is not properly initialized.
CAUTION