SBC PCD2 Series User manual

Document 27-600 | Release ENG09 | 2019-05-01
Manual
I/O-modules
for PCD1 / PCD2 series
and for PCD3 series
I/O-Modules
for PCD1 / PCD2
and PCD3

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 0-1
Content
0
Content
0 Content
0 Content
0.1 Document versions ............................................................................... 0-6
0.3 Brands and trademarks ........................................................................ 0-6
3 Product status of the I/O-moduls
5 Input/output (I/O) modules for PCD1 and PCD2
5.1 General informations ............................................................................. 5-1
5.1.1 Overview ............................................................................................... 5-1
5.1.2 Power consumption of PCD2 input/output modules .............................. 5-7
5.1.3 Maximal current consumption from base units ...................................... 5-8
5.2 Digital input modules ............................................................................. 5-9
5.2.1 PCD2.E11x, 8 digital inputs ................................................................... 5-10
5.2.2 PCD2.E160/161, 16 digital inputs, ribbon cable connector ................... 5-13
5.2.3 PCD2.E165/166, 16 digital inputs, spring terminal connectors ............. 5-16
5.3 Digital input modules, electrically isolated ............................................. 5-18
5.3.1 PCD2.E500, 6 digital inputs for 115 - 230 VAC .............................................. 5-19
5.3.2 PCD2.E610/611/613/616, 8 digital inputs, electrically isolated ............. 5-21
5.4 Digital output modules ........................................................................... 5-23
5.4.1 PCD2.A300, 6 digital outputs for 2 A each ............................................ 5-24
5.4.2 PCD2.A400, 8 digital outputs for 0.5 A each ......................................... 5-26
5.4.3 PCD2.A460, 16 digital outputs for 0.5 A each, with ribbon connector ... 5-28
5.4.4 PCD2.A465, 16 digital outputs, for each 0.5 A ...................................... 5-31
5.5 Digital output modules, electrically isolated .......................................... 5-33
5.5.1 PCD2.A200, 4 relays with make contacts, with contact protection ....... 5-34
5.5.2 PCD2.A210, 4 relays with break contacts, with contact protection ....... 5-36
5.5.3 PCD2.A220, 6 relays with make contacts, without contact protection .. 5-38
5.5.4 PCD2.A250, 8 relays with make contacts, without contact protection .. 5-40
5.5.5 PCD2.A410, 8 digital outputs for 0.5 A each, electrically isolated ......... 5-42
5.6 Digital combined input and output modules .......................................... 5-44
5.6.1 PCD2.B100, 2 inputs + 2 outputs
+ 4 digital inputs/outputs (selectable) .................................................... 5-45
5.7 Multi-functional input/output modules .................................................... 5-48
5.7.1 PCD2.G400, multi-functional input/output module ................................ 5-49
5.7.2 PCD2.G410, multi-functional I/O module
with elect. isolated digital I/O ................................................................. 5-50
5.8 Analogue input modules ........................................................................ 5-52
5.8.1 PCD2.W10x, analogue inputs, 4 channels, 12 bit resolution ................ 5-53
5.8.2 PCD2.W11x, analogue inputs, 4 channels, 12 bit resolution ................ 5-56
5.8.3 PCD2.W2x0, analogue inputs, 8 channels, 10 bit resolution ................ 5-61
5.8.4 PCD2.W3x0, analogue inputs, 8 channels, 12 bit resolution ................ 5-67
5.9 Analogue input modules with electricaly isolation ................................. 5-73
5.9.1 PCD2.W3x5, analogue inputs, 7 channels, 12 bit resolution,
electrical isolated ................................................................................... 5-74
5.10 Analogue output modules ..................................................................... 5-78
5.10.1 PCD2.W4x0, analogue outputs, 4 channels, 8 bit resolution ................ 5-79
5.10.2 PCD2.W6x0, analogue outputs, 4 channels, 12 bit resolution .............. 5-83
5.11 Analogue output modules with electrically isolation .............................. 5-87
5.11.1 PCD2.W6x5, analogue outputs, 6 (4) channels,
10 bit resolution, electrical isolated ....................................................... 5-88

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 0-2
Content
0
Content
5.12 Analogue input and output modules ...................................................... 5-92
5.12.1 PCD2.W5x0, analogue inputs/outputs, 2 + 2 channels,
12 bit resolution ..................................................................................... 5-93
5.13 Combined analogue input/output modules with galvanic isolation ........ 5-97
5.13.1 PCD2.W525 Combined analogue input/output modules
with galvanic isolation ........................................................................... 5-98
5.14 Analogue weighing modules ................................................................. 5-106
5.15 Analogue thermocouple modules .......................................................... 5-107
5.16 Fast counting modules .......................................................................... 5-108
5.16.1 PCD2.H100, counting module up to 20 kHz ......................................... 5-109
5.16.2 PCD2.H110, general purpose counting / measuring module
up to 100 kHz ........................................................................................ 5-114
5.17 SSI interface modules ........................................................................... 5-116
5.17.1 PCD2.H150, SSI interface module for absolute encoder ...................... 5-117
5.18 Motion control modules for stepper motors ........................................... 5-120
5.18.1 PCD2.H210, Motion control module for stepper motors ....................... 5-121
5.19 Motion control modules for servo-motors .............................................. 5-124
5.19.1 PCD2.H31x, motion control module for servo-motors, 1-axis encoder . 5-125
5.19.2 PCD2.H32x, motion control modules for servo-drives .......................... 5-129
6 Input/output (I/O) modules for PCD3
6.1 Introduction to I/O modules ................................................................... 6-1
6.1.1 Connector types .................................................................................... 6-6
6.1.2 Current consumption of the modules .................................................... 6-8
6.1.3 External input voltage ............................................................................ 6-9
6.1.4 Example I/O modules ............................................................................ 6-10
6.1.5 Open the module housing ..................................................................... 6-10
6.2 Digital input modules ............................................................................. 6-11
6.2.1 PCD3.E110/111/112/116, 8 digital inputs ............................................... 6-12
6.2.2 PCD3.E160/161, 16 digital inputs, ribbon cable connector ................... 6-14
6.2.3 PCD3.E165/166, 16 digital inputs, cage clamp terminal connectors .... 6-16
6.3 Digital input modules, electrically isolated from the I/O Bus ................. 6-18
6.3.1 PCD3.E500, 6 digital inputs, electrically isolated from the I/O Bus ....... 6-19
6.3.2 PCD3.E610/613, 8 digital inputs, electrically isolated from the I/O Bus 6-21
6.4 Digital output modules .......................................................................... 6-23
6.4.1 PCD3.A300, 6 digital outputs for 2 A each ............................................ 6-24
6.4.2 PCD3.A400, 8 digital outputs for 0.5 A each ......................................... 6-26
6.4.3 PCD3.A460, 16 digital outputs for 0.5 A each,
with ribbon cable connector .................................................................. 6-28
6.4.4 PCD3.A465, 16 digital outputs for 0.5 A each ....................................... 6-30
6.5 Digital output modules, electrically isolated ......................................... 6-32
6.5.1 PCD3.A200, 4 relays with make contacts, with contact protection ....... 6-33
6.5.2 PCD3.A210, 4 relays with break contacts, with contact protection ....... 6-35
6.5.3 PCD3.A220, 6 relays with make contacts, without contact protection .. 6-37
6.5.4 PCD3.A251, 8 relays, 6 with changeover contacts,
2 with make contacts ............................................................................. 6-39
6.5.5 PCD3.A410, 8 digital outputs for 0.5 A each, electrically isolated ......... 6-41

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 0-3
Content
0
Content
6.6 Digital output modules for manual operation, electrically isolated ....... 6-43
6.6.1 PCD3.A810, Digital manual control module with 4 relays,
2 with changeover, 2 with make contacts .............................................. 6-44
6.6.2 PCD3.A860, digital light and shade module, with 2 make contacts ...... 6-48
6.7 Digital combined input/output modules ................................................. 6-54
6.7.1 PCD3.B100, combined with 2 inputs + 4 digital I/Os ............................. 6-55
6.8 Analogue input modules ........................................................................ 6-58
6.8.1 PCD3.W2x0, analogue inputs, 8 channels, 10 bit resolution ................ 6-59
6.8.2 PCD3.W3x0, analogue inputs, 8 channels, 12 bit resolution ................ 6-65
6.9 Analogue input modules, electrically isolated from the I/O Bus ........... 6-73
6.9.1 PCD3.W3x5, analogue inputs electrically isolated from the I/O Bus,
7 channels, 12 Bit resolution ................................................................. 6-74
6.10 Analogue output modules .................................................................... 6-78
6.10.1 PCD3.W4x0, analogue outputs, 4 channels, 8 bit resolution ................ 6-79
6.10.2 PCD3.W6x0, analogue outputs, 4 channels, 12 bit resolution .............. 6-83
6.11 Analogue output modules, electrically isolated from the I/O Bus ......... 6-88
6.11.1 PCD3.W6x5, analogue outputs electrically isolated from the I/O Bus,
6(4) channels, 10 Bit resolution ............................................................. 6-89
6.12 Analogue combined input/output modules ............................................ 6-93
6.12.1 PCD3.W500, analogue inputs/outputs, 2 + 2 channels,
12 bit resolution ..................................................................................... 6-94
6.13 Analogue combined input/output modules, electrically isolated ............ 6-98
6.13.1 PCD3.W525 analogue combined input/output module
with electrical isolation .......................................................................... 6-99
6.14 Analogue manual control modules ....................................................... 6-104
6.14.1 PCD3.W800, Analogue manual control module with 4 output channels,
0…+10 V, 10 bit resolution .................................................................... 6-105
6.15 Weighing modules ................................................................................. 6-109
6.15.1 PCD3.W7x0 .......................................................................................... 6-109
6.16 General-purpose temperature modules ................................................ 6-110
6.16.1 PCD3.W745 .......................................................................................... 6-110
6.17 Counting and motion control I/O modules ............................................. 6-111
6.17.1 PCD3.H100, counting module up to 20 kHz ......................................... 6-112
6.17.2 PCD3.H110, counting module up to 100 kHz ........................................ 6-117
6.17.3 PCD3.H150, SSI interface module for absolute encoder ...................... 6-119
6.17.4 PCD3.H210, Motion control module for stepper motors ....................... 6-122
6.17.5 PCD3.H31x, motion control module for servo-motors, 1-axis encoder . 6-125
6.18 Miscellaneous modules ......................................................................... 6-129
6.18.1 PCD3.S100 Workshop simulator unit .................................................... 6-130

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 0-4
Content
0
Content
7 PCD2.B160 & PCD3.B160
7.1 Module Overview .................................................................................. 7-2
7.2 Hardware ............................................................................................... 7-2
7.2.1 I/O connection ....................................................................................... 7-3
7.2.2 LED signalization .................................................................................. 7-3
7.2.3 General technical data on inputs and outputs ....................................... 7-4
7.2.4 Technical data on inputs ........................................................................ 7-4
7.2.5 Input wiring ............................................................................................ 7-4
7.2.6 Technical data on outputs ..................................................................... 7-5
7.2.7 Output wiring ......................................................................................... 7-5
7.2.8 Label Editor ........................................................................................... 7-6
7.2.9 Bloc Diagram ......................................................................................... 7-7
7.3 CongurationinPG5deviceCongurator............................................. 7-8
7.4 Media Mapping ...................................................................................... 7-10
7.4.1 Symbol name & description .................................................................. 7-10
7.4.1.1 RdDigitalIO ............................................................................................ 7-10
7.4.1.2 RdOutputError ....................................................................................... 7-10
7.4.1.3 WrDigitalOutput ..................................................................................... 7-10
7.5 Direct input or output access in IL ......................................................... 7-11
7.5.1 Symbol name & description ................................................................. 7-11
7.5.1.1 RD_DIGITAL_IO_0TO15 ....................................................................... 7-11
7.5.1.2 MASK_RD_DIGITALOUTPUT_0TO15 ................................................. 7-11
7.5.1.3 RD_OUTPUT_ERROR_0TO15 ............................................................ 7-12
7.5.1.4 RD_FIRMWARE_VERSION ................................................................ 7-12
7.5.1.5 RD_MODULE_STATUS ........................................................................ 7-13
7.5.1.6 WR_DIGITAL_OUTPUT_0TO15 ........................................................... 7-13
7.5.2. Error PCD XOB 13 ................................................................................ 7-14
7.6 Error PCD XOB 13 ................................................................................ 7-15
8 PCD2.W380 & PCD3.W380
8.1 PCD2/3.W380,8analogcongurableinputs........................................ 8-2
8.1.1 Module overview ................................................................................... 8-2
8.1.2 Inputs connection .................................................................................. 8-3
8.1.3 Specications........................................................................................ 8-4
8.1.3.1 General data ......................................................................................... 8-4
8.1.3.2 Technical data of inputs ......................................................................... 8-5
8.1.4 Input wiring ............................................................................................ 8-7
8.1.5 Input values acquisition ......................................................................... 8-8
8.1.6 Congurabledigitallters...................................................................... 8-9
8.1.7 Out of range indication .......................................................................... 8-9
8.1.8 Input protections .................................................................................... 8-10
8.1.8.1 Current measuring range ...................................................................... 8-10
8.1.9 Protection mode .................................................................................... 8-11
8.1.10 LED signalization .................................................................................. 8-11
8.1.11 Block diagram ....................................................................................... 8-12
8.2 Preparing the PLC system .................................................................... 8-12

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 0-5
Content
0
Content
8.3 Module in PG5 environment .................................................................. 8-13
8.3.1 Preparing PG5 ...................................................................................... 8-13
8.3.2 Choosing the module ............................................................................ 8-13
8.3.3 Inputsconguration............................................................................... 8-14
8.3.4 Data acquisition ..................................................................................... 8-15
8.3.4.1 With media mapping ............................................................................. 8-15
8.3.4.2 With direct access ................................................................................. 8-18
8.4 Example of linearization ........................................................................ 8-19
9 PCD2.G200
9.1 Overview PCD2.G200 ........................................................................... 9-2
9.2 Specications........................................................................................ 9-3
9.2.1 Resolution of the analogue inputs ........................................................ 9-5
9.2.2 Dip Switch position ................................................................................ 9-5
9.2.3 I/O connection ....................................................................................... 9-6
9.3 Preparing the PLC system .................................................................... 9-6
9.3.1 CPU FW ................................................................................................ 9-6
9.3.2 Preparing PG5 ...................................................................................... 9-7
9.3.2.1 Devicecongurator............................................................................... 9-7
9.3.2.2 Media mapping ...................................................................................... 9-10
9.4 Example of linearization ........................................................................ 9-11
A Appendix
A.1 Icons ......................................................................................................A-1
A.2 Terms ...................................................................................................A-2
A.3 Abbreviations .......................................................................................A-2
A.4 Hardware watchdog .............................................................................A-3
A.5 Sicherheitshinweise ..............................................................................A-4
A.6 Installation direction and relays contact protection ...............................A-5
A.6.1 Installation direction for switching extra low voltages ............................A-5
A.6.2 Installation direction for switching low voltages .....................................A-6
A.6.3 Switching inductive loads ......................................................................A-9
A.6.4 Relay manufacturer’s information on RC unit dimensioning .................A-9
A.6 Contact ..................................................................................................A-11

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 0-6
Content
0
Document versions | Brands and trademarks
0.1 Document versions
Version Changes Published Remarks
EN01 2014-07-28 2014-07-30 New document content from
manual 26/737 PCD1|PCD2
EN02 2014-08-06 2014-08-06 Content from 26/789 PCD3 added
EN03 2014-09-19 2014-09-19 Better names for the chapters
ENG04 2015-06-11 2015-06-11 New phone numbers
PCD3.W800 has no galvanic separation
ENG05 2015–10-13
2016-04-27
2015–10-13
2016-04-27
- Wrong text the for PCD2.A460
- new chapter A4 HW-Watchdog
ENG06 2017-03-07 2017-03-07 PCD2.W6x5 outputs and not inputs
ENG07 2018-06-01
2018-06-18
2018-06-22
2018-06-25
2018-06-25
2018-06-25
- PCDx.B160 added
- PCDx.W380 added
- PCD2.G200 added
ENG08 2018-07-11 2018-07-11 PCDx.W2x0 Temperature range +400°C
ENG09 2019-05-01 2019-05-01 ■Status of products in a separate chapter
■Wiring examples relays: in the appendix
0.3 Brands and trademarks
Saia PCD®and Saia PG5®
are registered trademarks of Saia-Burgess Controls AG.
Technicalmodicationsarebasedonthecurrentstate-of-the-arttechnology.
Saia-Burgess Controls AG, 2014. ©All rights reserved.
Published in Switzerland

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 3-7
Product Status
3
3 Product status of the I/O-moduls
Article
PCD2. PCD3.
Active Outphased
(no longer
produced)
Repair phase
until:
Follow-up
product:
PCD2.A200 PCD3.A200 ×
PCD2.A210 PCD3.A210 ×
PCD2.A220 PCD3.A220 ×
PCD2.A250 ×
PCD3.A251 ×
PCD2.A300 PCD2.A300 ×
PCD2.A400 PCD2.A400 ×
PCD2.A410 PCD2.A410 ×
PCD2.A460 PCD2.A460 ×
PCD2.A465 PCD2.A465 ×
PCD2.B100 PCD2.B100 ×
PCD2.B160 PCD2.B160 ×
PCD2.E110 PCD2.E110 ×
PCD2.E111 PCD2.E111 ×
PCD2.E112 PCD2.E112 × 2021-12-31 no
PCD2.E116 PCD2.E116 × 2021-12-31 no
PCD2.E160 PCD2.E160 ×
PCD2.E161 PCD2.E161 ×
PCD2.E165 PCD2.E165 ×
PCD2.E166 PCD2.E166 ×
PCD2.E500 PCD2.E500 ×
PCD2.E610 PCD2.E610 ×
PCD2.E611 PCD2.E611 ×
PCD2.E613 PCD2.E613 ×
PCD2.E616 PCD2.E616 × 2021-12-31 no
PCD2.G200 PCD2.G200 ×
PCD2.G400 PCD3.G400 × 2018-12-31 no
PCD2.G410 PCD2.G410 × 2018-12-31 no
PCD2.H100 PCD2.H100 × expired no
PCD2.H110 PCD2.H110 × 2018-12-31 no
PCD2.H112 PCD2.H112 ×
PCD2.H114 PCD2.H114 ×
PCD2.H150 PCD2.H150 ×
PCD2.H210 PCD2.H210 × 2018-12-31 no
PCD2.H222 PCD2.H222 ×
PCD2.H310 PCD2.H310 ×
PCD2.H311 PCD2.H311 ×
PCD2.H320 PCD2.H320 × 2018-12-31 no
PCD2.H322 PCD2.H322 × 2018-12-31 no
PCD2.H325 PCD2.H325 × 2018-12-31 no
PCD2.H327 PCD2.H327 × 2018-12-31 no
PCD2.W100 PCD2.W100 × expired PCD2.W380
PCD2.W105 PCD2.W105 × expired PCD2.W380

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 3-8
Product Status
3
Article
PCD2. PCD3.
Active Outphased
(no longer
produced)
Repair phase
until:
Follow-up
product:
PCD2.W110 PCD2.W110 × expired PCD2.W350
PCD2.W111 PCD2.W111 × expired PCD2.W350
PCD2.W112 PCD2.W112 × expired PCD2.W340
PCD2.W113 PCD2.W113 × expired PCD2.W340
PCD2.W114 PCD2.W114 × expired PCD2.W350
PCD2.W200 PCD2.W200 ×
PCD2.W210 PCD2.W210 ×
PCD2.W220 PCD2.W220 ×
PCD2.W220Z02 PCD2.W220Z02 ×
PCD2.W220Z12 PCD2.W220Z12 ×
PCD2.W300 PCD2.W300 ×
PCD2.W305 PCD2.W305 ×
PCD2.W310 PCD2.W310 ×
PCD2.W315 PCD2.W315 ×
PCD2.W325 PCD2.W325 ×
PCD2.W340 PCD2.W340 ×
PCD2.W350 PCD2.W350 ×
PCD2.W360 PCD2.W360 ×
PCD2.W380 PCD2.W380 ×
PCD2.W525 PCD2.W525 ×
PCD2.W400 PCD2.W400 ×
PCD2.W410 PCD2.W410 ×
PCD2.W500 PCD2.W500 × expired PCD2.W525
PCD2.W510 PCD2.W510 × expired PCD2.W525
PCD2.W600 PCD2.W600 ×
PCD2.W610 PCD2.W610 ×
PCD2.W605 PCD2.W605 ×
PCD2.W615 PCD2.W615 ×
PCD2.W625 PCD2.W625 ×
PCD2.W710 PCD2.W710 × expired PCD2.W720
PCD2.W720 PCD2.W720 ×
PCD2.W745 PCD2.W745 ×

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 5-1
I/O modules PCD1|PCD2
Overview
5
5 Input/output (I/O) modules for PCD1 and PCD2
5.1 General informations
5.1.1 Overview
The summary below shows the available digital and analogue I/O modules, coun-
ters etc. for the PCD2 series:
Type Desig-
nation
No.
I/Os
or
mod
Description Input/output
signal range
Page
PCD2 digital input modules
PCD2.E110 8 I 8 8 inputs 8 ms 24 VDC 5-10
PCD2.E111 8 I 8 8 inputs 0.2 ms 24 VDC 5-10
PCD2.E112 8 I 8 8 inputs 9 ms 12 VDC 5-10
PCD2.E116 8 I 8 8 inputs 0.2 ms 5 VDC 5-10
PCD2.E160 16 I 16 16 inputs 8 ms, connection via
34-pole ribbon connector
24 VDC 5-13
PCD2.E161 16 I 16 16 inputs 0.2 ms, connection via
34-pole ribbon connector
24 VDC 5-13
PCD2.E165 16 I 16 16 inputs 8 ms,
spring terminal connection
24 VDC 5-16
PCD2.E166 16 I 16 16 inputs 0.2 ms,
spring terminal connection
24 VDC 5-16
PCD2 digital input modules, electrically isolated 1)
PCD2.E500 6 I 6 6 inputs 100 … 240 VAC 5-19
PCD2.E610 8 I 8 8 inputs 10 ms,
electrically isolated
24 VDC 5-21
PCD2.E611 8 I 8 8 inputs 0.2 ms,
electrically isolated
24 VDC 5-21
PCD2.E613 8 I 8 8 inputs 9 ms,
electrically isolated
48 VDC 5-21
PCD2.E616 8 I 8 8 inputs 0.2 ms,
electrically isolated
5 VDC 5-21
PCD2 digital output modules
PCD2.A300 6 O 6 6 outputs 2 A 10 … 32 VDC 5-24
PCD2.A400 8 O 8 8 outputs 0.5 A 5 … 32 VDC 5-26
PCD2.A460 8 O 8 16 outputs 0.5 A, connection via
34-pole ribbon connector
10 … 32 VDC 5-28
PCD2.A465 16 O 16 16 outputs 0.5 A,
spring terminal connection
10 … 32 VDC 5-31
1) galvanic separation of outputs to Saia PCD®, the channels themselves are not separated against
each other

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 5-2
I/O modules PCD1|PCD2
Overview
5
Type Desig-
nation
No.
I/Os
or
mod
Description Input/output
signal range
Page
PCD2 digital output modules, electrically isolated
PCD2.A200 4 O 4 4 make contacts 2 A 250 VAC
50 VDC
5-34
PCD2.A210 4 O 4 4 break contacts 2 A 250 VAC
50 VDC
5-36
PCD2.A220 6 O 6 6 make contacts 2 A 250 VAC
50 VDC
5-38
PCD2.A250 8 O 8 8 make contacts 2 A 48 VAC
50 VDC
5-40
PCD2.A410 8 O 8 8 outputs 0.5 A,
electrically isolated 1)
5 … 32 VDC 5-42
PCD2 digital, combined I/O modules
PCD2.B100 2 I +
2 O +
4 I/O
8 2 inputs, 2 outputs, 4 selectable
as inputs or outputs
24 VDC
5 … 32 VDC
24 VDC
5-45
PCD2.B160 16 I/O 16 Inblocksof4congurable 18…30 VDC 7
PCD2 multi-functional I/O modules
PCD2.G200 In
Out
In
In
In
Out
4
4
2
2
4
8
Digital: 15…30 VDC
Digital: 0.5 A/10…32 VDC
Analogue: 0…10 V
Analogue: Pt1000 or Ni1000
Analogue: Universal (selectable)
Analogue: 0…10 V
see left side 9
PCD2.G400 In
In
In
Out
Out
10
2
6
8
6
Digital inputs
Analogue inputs 10 bit
Analogue inputs 10 bit
Digital outputs
Analogue outputs 8 bit
24 VDC
0 … 10V
Pt/Ni 1000
24 VDC
0 … 10VDC
5-49
PCD2.G410 In
In
Out
Out
16
4
4
4
Digital inputs
Analogue inputs 10 bit
Relay outputs
Analogue outputs 8 bit
24 VDC
I/U/T
250 VAC
U/I
5-50
1) galvanic separation of outputs to Saia PCD®, the channels themselves are not separated against
each other

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 5-3
I/O modules PCD1|PCD2
Overview
5
Type Desig-
nation
No.
I/Os
or
mod
Description Input/output
signal range
Page
PCD2 analogue input modules
PCD2.W100 4 I 4 Analogue inputs 12 bit 0 … 10V,
–10 … +10V
5-53
PCD2.W105 4 I 4 Analogue inputs 12 bit 0 … +20mA
-20 … 0mA
-20 … +20mA
5-53
PCD2.W110 4 I 4 Analogue inputs 12 bit Pt 100 5-56
PCD2.W111 4 I 4 Analogue inputs 12 bit Ni 100 5-56
PCD2.W112 4 I 4 Analogue inputs 12 bit Pt 1000 5-56
PCD2.W113 4 I 4 Analogue inputs 12 bit Ni 1000 5-56
PCD2.W114 4 I 4 Analogue inputs 12 bit Pt 100 5-56
PCD2.W200 8 I 8 8 analogue inputs 10 bit 0 … 10V 5-61
PCD2.W210 8 I 8 8 analogue inputs 10 bit 0 … 20mA 5-61
PCD2.W220 8 I 8 8 analogue inputs 10 bit Pt/Ni 1000 5-61
PCD2.W220Z02 8 I 8 8 analogue inputs 10 bit NTC 10 5-61
PCD2.W220Z12 8 I 8 8 analogue inputs 10 bit 4×0 … 10V
4×Pt/Ni 1000
5-61
PCD2.W300 8 I 8 8 analogue inputs 12 bit 0 … 10V 5-67
PCD2.W310 8 I 8 8 analogue inputs 12 bit 0 … 20mA 5-67
PCD2.W340 8 I 8 8 analogue inputs 12 bit,
jumper selectable
0 … 10V,
0 … 2,5V
0 … 20mA,
Pt/Ni 1000
5-67
PCD2.W350 8 I 8 8 analogue inputs 12 bit Pt/Ni 100 5-67
PCD2.W360 8 I 8 8 analogue inputs 12 bit,
resolution ‹ 0.1 °C
Pt 1000 5-67
PCD2.W380 8 I 8 8 analogue inputs 13 bit,
congurationviasoftware
diverse 8
PCD2 analogue input modules, electrically isolated 1)
PCD2.W305 7 I 7 7 analogue inputs 12 bit 0 … 10V 5-74
PCD2.W315 7 I 7 7 analogue inputs 12 bit 0 … 20mA 5-74
PCD2.W325 7 I 7 7 analogue inputs 12 bit –10 … +10V 5-74
1) galvanic separation of outputs to Saia PCD®, the channels themselves are not separated against
each other

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 5-4
I/O modules PCD1|PCD2
Overview
5
Type Desig-
nation
No.
I/Os
or
mod
Description Input/output
signal range
Page
PCD2 analogue output modules
PCD2.W400 4 O 4 4 analogue outputs 8 bit 0 … 10V 5-79
PCD2.W410 4 O 4 4 analogue outputs 8 bit,
jumper selectable
0 … 10V,
0 … 20mA,
4 … 20mA
5-79
PCD2.W600 4 O 4 4 analogue outputs 12 bit 0 … 10V 5-83
PCD2.W610 4 O 4 4 analogue outputs 12 bit,
jumper selectable
0 … 10V,
–10 V..+10 V
0 … 20mA,
4 … 20mA
5-83
PCD2 analogue output modules, electrically isolated 1)
PCD2.W605 6 O 6 6 analogue outputs 10 bit 0 … 10V 5-88
PCD2.W615 4 O 4 4 analogue outputs 10 bit 0 … 20mA 5-88
PCD2.W625 6 O 6 6 analogue outputs 10 bit –10 … +10V 5-88
PCD2 analogue combined input/output modules
PCD2.W500 2I +
2O
4 2 analogue inputs 12 bit
+ 2 analogue outputs 12 bit
0 … 10V,
–10 … +10V
5-92
PCD2.W510 2I +
2O
4 2 analogue inputs 12 bit
+ 2 analogue outputs 12 bit
0 … +20mA
-20 … +20mA
5-92
PCD2 analogue combined input/output modules, electrically isolated 1)
PCD2.W525 4 E
+ 2 A
4 4 analogue inputs 14 bit
+ 2 analogue outputs 12 bit
0 … 10V,
0(4) … 20mA
Pt 500 / 1000,
Ni 1000
0 … 10V,
0(4) … 20mA
5-98

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 5-5
I/O modules PCD1|PCD2
Overview
5
Type Desig-
nation
No.
I/Os
or
mod
Description Input/output
signal range
Page
PCD2 weighing modules
PCD2.W710 1 I 1 1-channel weighing module for
4/6-wire weighing cells
5–106
PCD2.W720 2 I 2 2-channel weighing module for
4/6-wire weighing cells
5–106
PCD2 thermocouple modules
PCD2.W745 4 I 4 Thermocouple module for J, K …
thermocouples 2)
5–107
1) Galvanic separation of outputs to Saia PCD®, channels themselves not separated
2) Non-pluggable cage clamp terminals

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 5-6
I/O modules PCD1|PCD2
Overview
5
Type Description Page
PCCD2 fast counting I/O modules
PCD2.H100 Counting module up to 20 kHz 5–109
PCD2.H110 General purpose module up to 100 kHz 5–114
PCD2 SSI encoder modules
PCD2.H150 SSI interface module 5-117
PCD2 Positioning modules for stepping motors
PCD2.H210 Motion control module for stepper motors 5-121
Positioning modules for servo-drives
PCD2.H310 Motion control module for servo-motors
1-axis encoder 24 VDC
5-125
PCD2.H311 Same as H310, but 1-axis encoder 5 VDC 5-125
PCD2.H320 Motion control module for servo-drives
2-axis with encoder 24 VDC
5-129
PCD2.H322 Same as H320, but 1-axis (slave operation) 5-129
PCD2.H325 Motion control module for servo-drives, 2-axis with 5 V
and SSI absolute value encoder
5-129
PCD2.H327 Same as H325, but 1-axis (slave operation) 5-129

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 5-7
I/O modules PCD1|PCD2
Overview
5
5.1.2 Power consumption of PCD2 input/output modules
Type
PCD2.…
Maximal
internal current
consumption
I from +5 V [mA]
Maximal
internal current
consumption
I from +V [mA]
Maximal external current
consumption
at 24 V, I [mA]
E11x
E16x
E500
E61x
24
72
1
24
---
---
---
---
8 inputs, 6 mA/input
16 inputs, 4 mA/input
6inputs,10 … 12mA/input
8 inputs, 5 mA/input
A200
A220
A251
A300
A400
A410
A46x
B100
B160
G200
15
20
25
20
25
24
74
25
120
12
---
---
---
---
---
---
---
---
---
35
32 mA1)
48 mA1)
64 mA1)
Load current
Load current
Load current
Load current
Load current
Load current
Load current
W200/210
W220
W300/310
W3x5
W340/360
W350
W380
W4x0
W5x0
W525
W600
W605/625
W610
W615
W720
W745
8
8
8
60
8
8
25
1
200
40
4
110
110
55
60
200
5
16
5
0
20
30
25
30
---
---
20
---
---
---
100
---
---
---
---
---
---
---
---
W410 100 mA2)
---
Load current
---
---
100 mA2)
90 mA
---
---
H100/H110
H150
H210
H310/H311
H320/H322
H325/H327
90
25
85
140
230
250
---
---
---
---
20
20
CCO output: load current
Load current
Load current
max. 15 mA
Load current
Load current
1) Coil resistance of the relay 3 kOhm
2) Basic consumption 20 mA, plus 0..20 mA per output

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 5-8
I/O modules PCD1|PCD2
Overview
5
5.1.3 Maximal current consumption from base units
Base unit internal 5 V-
Bus
internal +V-
Bus
PCD1 750 mA 100 mA
PCD2.M110/M120 (before hardware version H) 1100 mA 200 mA
PCD2.M110/M120 1600 mA 200 mA
PCD2.M150/M170 1600 mA 200 mA
PCD2.C200 1500 mA 630 mA
PCD2.M2210-C15 500 mA 200 mA
PCD2.M480 2000 mA 200 mA
PCD2.M4x60 800 mA 250 mA
PCD2.M5xx0 1400 mA 800 mA
PCD2.C1000 1400 mA 800 mA
PCD2.C2000 1400 mA 800 mA

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 5-9
I/O modules PCD1|PCD2
Digital I/O modules
5
5.2 Digital input modules
PCD2.E110 8 inputs, 24 VDC, 8 ms
PCD2.E111 8 inputs, 24 VDC, 0.2 ms
PCD2.E112 8 inputs, 12 VDC, 9 ms
PCD2.E116 8 inputs, 5 VDC, 0.2 ms
PCD2.E160 16 inputs, 24 VDC, 8 ms,
connection via 34-pole ribbon connector
PCD2.E161 16 inputs, 24 VDC, 0.2 ms,
connection via 34-pole ribbon connector
PCD2.E165 16 inputs, 24 VDC, 8 ms,
spring terminal connection
PCD2.E166 16 inputs, 24 VDC, 0.2 ms,
spring terminal connection
Denition of input signals
for 5 VDC for 12 VDC for 24 VDC
PCD2.E116 PCD2.E112 PCD2.E110, PCD2.E111,
PCD2.E160 … E166
7 VDC
5 VDC
2.5 VDC
0 VDC
1 VDC
-7 VDC
1
0
15 VDC
12 VDC
7.5 VDC
0 VDC
2.5 VDC
-15 VDC
1
0
30 V DC
24 V DC
15 V DC
0 V DC
5 V DC
-30 V DC
1
0
I/O modules and I/O terminal blocks may only be plugged in and removed when
the Saia PCD®and the external +24 V are disconnected from the power supply.

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 5-10
I/O modules PCD1|PCD2
PCD2.E110, PCD2.E111, PCD2.E112 and PCD2.E116
5
5.2.1 PCD2.E11x, 8 digital inputs
Application
Low-cost input module for source or sink operation with 8 inputs, electrically
connected. Suitable for most electronic and electromechanical switching elements
at 24 VDC.ThePCD2.E111di󰀨ersfromthePCD2.E110initsshorterinputdelay,
typically 0.2 ms.
Technical data
Number of inputs: 8 electrically connected,
source or sink operation
Input voltage E110 :
E111 :
E112 :
E116 :
Special :
24 VDC (15…30 VDC) smoothed or pulsed
24 VDC (15…30 VDC) smoothed,
max. 10 % residual ripple
12 VDC (7.5…15 VDC) smoothed,
max. 10 % residual ripple
5 VDC (1…7 VDC) smoothed,
max. 10 % residual ripple
other values on request
Input current: 6 mA at 24 VDC
Input delay E110 :
E111 :
E112 :
E116:
typically 8 ms
typically 0.2 ms
typically 9 ms
typically 0.2 ms
Resistance to interference:
acc. to IEC 801-4
2 kV under capacitive coupling
(whole trunk group)
Internal current consump-
tion: (from +5 V bus)
1 … 24mA;typically12mA
Internal current consump-
tion: (from V+ bus)
0 mA
External current consump-
tion:
max. 48 mA (all inputs=1) at 24 VDC
Terminals: Pluggable 10-pole screw terminal block
(4 405 4847 0), for wires up to 1.5 mm²

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01 5-11
I/O modules PCD1|PCD2
PCD2.E110, PCD2.E111, PCD2.E112 and PCD2.E116
5
LEDs and connection terminals
9 8 7 6 5 4 3 2 1 0
E0E1E2E3E4E5E6E7
L
Bus connector
Bus interface and
Threshold switches
Input circuits
LEDs
Screw terminals
Inputs E0 to E7
Input load resistors
User ground -