Seal Shield Silver Seal SSM3W User manual
Congratulations on taking the rst step toward a cleaner and safer environment.
Computer input devices such as keyboards and mice are a cross-contamination
point for pathogens. Seal Shield is an important line of defense to help prevent
infections and save lives. Seal Shield keyboards and mice are 100% waterproof,
washable and include antimicrobial product protection*.
Disinfect with bleach wipes, quaternary ammonia wipes, disinfectant sprays or
whatever solution your standard cleaning protocol provides. Product can even
be fully submersed in a bleach or disinfectant solution.
Product Manual
Silver Seal™ Medical Grade Wireless Scroll Mouse
Model: SSM3W
Resistant Against:
Water
Disinfectants
Dust
Sand
Alcohol
Blood
Solvents
Humidity
Corrosives
Shock
Bleach
Heat
Salt Water
Abrasives
Dirt
Alkaline
Acid
Cold
This product is Silver Seal™ protected. It
contains an antimicrobial, fungistatic agent
which protects the product and keeps it
cleaner, greener and fresher by inhibiting
the growth of microbial bacteria, mold,
mildew and fungi on the product’s surface.
Windows®and Mac®Compatible
Mac®Compatibility requires OS X 10.5 or later.
Copyright© 2014, Seal Shield, LLC. All rights reserved. All other trademarks and trade names are those of their respective owners.
Seal Shield, LLC | Jacksonville, FL
Installation Instructions:
Plug in the USB charging station and fully charge the mouse. The LED light on the
charging station will turn from red to green when the mouse is fully charged.
Note: The internal rechargeable battery in the mouse should last several days between
charges. The mouse should be returned to the charger every 2-3 days or when the LED
light indicates that it needs to be charged, but should not be charged daily as this is
unnecessary and may degrade the battery life.
Connect the charging base by inserting the USB connection wire to your computer
(Figure A). This connection provides power to the base and connection for the 3-port
hub in the base.
Before You Begin:
Connecting the Mouse to Your Computer:
Install the Micro USB receiver (Figure B) into a USB port on the computer or into any
of the USB ports on the charging station and wait for the device to Plug and Play.
Your Seal Shield™ mouse is designed to use the default drivers on your computer,
so no additional software is necessary.
Turning the Mouse ON and OFF:
To turn the mouse ON, press the right button (when viewed from the bottom) and hold
until the red light turns on. To turn the mouse OFF, press and hold the button until the
red light turns off.
Pairing the Mouse with the Computer:
If you have not already installed the Micro USB receiver please see the section
called “Connecting the Mouse to your Computer” above. In most cases, the mouse
will already be paired with the supplied receiver. If the mouse is not paired, or if you
have replaced the receiver follow the steps below:
Recharging the Mouse
When the mouse needs to be recharged, a red LED light underneath the scroll wheel will
BLINK indicating that the mouse needs to be charged again.
Note: The internal rechargeable battery in the mouse should last several days between
charges. The mouse should be returned to the charger every 2-3 days or when the LED
light indicates that it needs to be charged, but should not be charged daily as this is
unnecessary and may degrade the battery life.
Insert the Micro USB receiver1.
Immediately press and hold the left button on the bottom of
the mouse for 5 seconds (when viewed from the bottom)
2.
The mouse and receiver should now be paired and operational3.
Installation Instructions:
This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. There is no guarantee, however, that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission
limits. Seal Shield, LLC, is not responsible for any radio or television interference caused by using other
than recommended cables and connectors or by unauthorized changes or modications to this equipment.
Unauthorized changes or modications could void the limited warranty.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference re-
ceived, including interference that may cause undesired operation.
CAUTION: Changes or modication not expressly approved by the manufacturer will void this warranty.
FCC Compliance:
Seal Shield™ Limited One (1) Year Warranty:
SEAL SHIELD™ hereby warrants to the initial purchaser that this product, if used under normal conditions,
will be free of any defect in materials and workmanship for the life of the product. SEAL SHIELD™ shall
have no obligation under this warranty or otherwise if:
Seal Shield, LLC (“Seal Shield”) hereby provides a Limited One (1) Year Warranty (“Warranty Period”) to the
initial purchaser of this product (“Purchaser”) that, if used under normal conditions, this product will be free
of any defect in materials and workmanship for the Warranty Period of the product.
This warranty is the sole and exclusive warranty for this product and is in lieu of all other warranties, ex-
press or implied, including any warranty of merchantability or tness for a particular purpose. The sole and
exclusive remedies available to the initial purchaser for any defects in materials or workmanship shall be
the obligation of Seal Shield, at its sole option, to either refund the purchase price of the product, or repair
or replace the non-functioning or defective product, PROVIDED the Purchaser: (a) obtains a Return Autho-
rization number (“RMA”) from Seal Shield; (b) provides detailed information regarding the reason for the
warranty claim; (c) product returns the product to Seal Shield, freight prepaid, if requested; and (d) provides
proof and date of purchase. In the event of discontinuance or unavailability of the product, Seal Shield
reserves the right to replace with a comparable product. Purchaser can obtain an RMA by contacting Seal
Shield via www.sealshield.com and completing the RMA form at the following link Product Support
Seal Shield shall have no obligation under this Warranty or otherwise if:
1. the product has been damaged by abuse, negligence, accident, misuse or involved in accidental or
natural disasters;
2. the product has been damaged by improper cleaning or maintenance;
3. the product has been damaged by normal wear and tear;
4. the product has not been operated in accordance with its operating instructions; or
5. the product has modied, altered, or repaired by other than Seal Shield.
Seal Shield shall not be liable for any loss, injury or damages to persons or property resulting from the use
of this product or any failure of or defect in this product, nor shall Seal Shield be liable to the initial user of
this product or to any other person or entity for any general, special, direct, indirect, incidental, consequen-
tial, exemplary, punitive, or other damages of any kind or nature whatsoever, including, but not limited to,
damages for loss of data, prots or goodwill. Products which have been subject to abuse such as, misuse,
vandalism, accident, alteration, neglect, unauthorized repair or improper installation will not be covered
by the warranty. Seal Shield is not responsible for damage that occurs as a result of your failure to follow
instructions intended for the product.
Use Hospital Grade Disinfectant Sprays
The Seal Shield mouse is designed to work with
virtually all medical grade, commercial grade,
antibacterial, antiviral and antifungal sprays to
kill most known surface contaminants includ-
ing SARS, Inuenza, Staph and MRSA. Testing
conrms that this is the most effective cleaning
protocol. Thoroughly spray all surface areas and
between keys. Use as directed. Wipe away excess
moisture prior to use.
Use Disinfectant Wipes
Alcohol based disinfectant wipes are the fastest
and easiest way to disinfect your Seal Shield
mouse. Thoroughly wipe all surface area with
disinfectant wipes.
Hand Wash with Soap and Warm Water
Your Seal Shield mouse is washable and fully
submersible.
1. Soak the mouse in warm water using dish soap
or other cleaning agent. Vigorously wash and rinse
the mouse in order to insure thorough cleaning.
2. Shake dry. Wipe away excess surface moisture.
3. Begin using your wireless mouse again.
Machine Wash in Dishwasher
Your Seal Shield mouse is designed to be washed
in a dishwasher using standard automatic dish-
washer detergent with water or heat settings not
to exceed 140 degrees Fahrenheit.
1. Place the mouse on top rack of dishwasher
using dishwasher detergent and standard wash
cycle. Disable “Heated Drying.”
2. Remove from dishwasher and shake dry. Wipe
away excess surface moisture.
3. Begin using your wireless mouse again.
Recommended Cleaning Protocols:
IMPORTANT:
Do not wash Charging Base. The USB Charging Base and Micro USB
receiver are not washable nor waterproof.
Other Seal Shield Mouse manuals
