SellEton Scales SL-K120 User manual

[e-mail] (844)-735-5386 www.selletonscales.com
SL-K120
INDUSTRIAL PRE-STRETCH WRAPPING MACHINE
Load cell Feet
Label printers
bracket screws
Outer tower bolts
Scoreboard
bracketbolt
Inner tower
bolts
INSTALLATION
MANUAL

[e-mail] (844)-735-5386 www.selletonscales.com
SL-K120
INDUSTRIAL PRE-STRETCH WRAPPING MACHINE
Start unpacking the
protective Frame of the
Wrapping machines
1
Set the wrapping
machine on the ground
3
Use the forklift channels
to pick the wrapping machine
up & remove it from Crate.
2

[e-mail] (844)-735-5386 www.selletonscales.com
SL-K120
INDUSTRIAL PRE-STRETCH WRAPPING MACHINE
Lift up the tower with 2-3
people or use a forklift
& strap
4
Remove the Side panel
on the tower by removing
the screws
6
Remove the Engine
Cover by unscrewing the
bolts
5

[e-mail] (844)-735-5386 www.selletonscales.com
SL-K120
INDUSTRIAL PRE-STRETCH WRAPPING MACHINE
Locate the anchoring
holes
7
Install the 2 bolts located on to
the left side of the machine,
on each side of the stretch wrap
9
Install the 2 bolts
8

[e-mail] (844)-735-5386 www.selletonscales.com
SL-K120
INDUSTRIAL PRE-STRETCH WRAPPING MACHINE
Install the Bolt on top of the
tower to hold the bracket
& the scoreboard
10
Install the Bracket for the printer
& plug in the printer
& power cable
12
Plug in the Power & the 5 prong
scoreboard cables
11

SL-K120
INDUSTRIAL PRE-STRETCH WRAPPING MACHINE
Install all 4 feet
& Screw all the way up
13
Place the stretch wrap film on to
the pole system & feed it as
shown in the below diagram
14
[e-mail] (844)-735-5386 www.selletonscales.com