Sencor SLE3217TC User manual

LED Television
SLE3217TC
USER'S MANUAL
EN

EN 1
EN
06/2016
2016
Content
CAREFULLY READ THIS USER’S MANUAL BEFORE PUTTING THE TELEVISION
INTO OPERATION. KEEP IT FOR FUTURE USE. RECORD THE MODEL NUMBER AND
THE SERIAL NUMBER OF THE TELEVISION. SEE THE LABEL ON THE REAR COVER
AND PROVIDE THIS INFORMATION TO YOUR VENDOR IN THE EVENT THAT YOU
REQUIRE REPAIRS.
Content
1. Important safety instructions........................................................................................................2
2. Stand assembly...............................................................................................................................9
3. Device description......................................................................................................................... 10
3.1. Control panel button function............................................................................................. 10
3.2. TV terminal connections..................................................................................................... 10
4. Remote control ................................................................................................................................11
5. First time setup...............................................................................................................................14
5.1. Select Language .....................................................................................................................14
5.2. Select Country........................................................................................................................14
5.3. Surrounding............................................................................................................................ 15
5.4. Auto Tuning............................................................................................................................ 15
6. Menu .................................................................................................................................................17
6.1. Channel menu.........................................................................................................................17
6.2. Picture menu..........................................................................................................................21
6.3. Sound menu..........................................................................................................................24
6.4. Time menu............................................................................................................................ 26
6.5. Lock menu ............................................................................................................................ 28
6.6. Hotel mode.............................................................................................................................31
6.7. Setup menu .......................................................................................................................... 32
6.8. Screen menu (only PC mode) ..........................................................................................37
7. USB .................................................................................................................................................39
7.1. Photo menu............................................................................................................................ 40
7.2. Music menu.............................................................................................................................41
7.3. Movie menu ...........................................................................................................................42
7.4. Text menu.............................................................................................................................. 43
8. Trouble shooting guide.................................................................................................................44
9. Technical specifications ...............................................................................................................47

2 EN
EN
06/2016
2016
Important safety instructions
1. Important safety instructions
If you want to use this product correctly, carefully read this user’smanual and store it for
future reference. If you give (sell) the appliance to somebody, please also include all the
documentation together with this appliance, including this user’smanual.
To reduce the risk of injury
by electrical shock do not
remove the cover (or the
rear side). There are no
components inside which
the user can repair. Have
all repairs or adjustments
performed at an authorised
service centre.
The flash symbol in
an equilateral triangle
indicates that there is
dangerous voltage inside
this appliance, which
presents arisk of injury by
electrical shock.
The exclamation mark
in an equilateral triangle
symbol indicates important
operating or servicing
instructions in the
appliance'sdocumentation.
General safety instructions
– Carefully read this manual before using the appliance. Follow the instructions
contained in this user’smanual.
– Heed all warnings.
– Adhere to all instructions.
– Use only accessories determined by the manufacturer.
– AN OPEN FLAME MUST NOT BE PLACED ON THE APPLIANCE, E.G. ABURNING
CANDLE. DO NOT PLACE HOT ITEMS OR OBJECTS WITH AN OPEN FLAME E.G.
CANDLES OR NIGHT LAMPS ON OR IN THE VICINITY OF THE APPLIANCE. HIGH
TEMPERATURES MAY MELT PLASTIC PARTS AND CAUSE AFIRE.
– Use the appliance in atemperate climate zone.
– Under no condition does the manufacturer or the vendor of the appliance take
responsibility for any direct or indirect damages caused by not adhering to
instructions for installation, setup, use, service or cleaning of this appliance as
described in this user’smanual.
– Protect the appliance against being knocked, dropped, hit and shaken and against
vibrations, humidity and dust.
– Before allowing children to use the appliance, they must be appropriately to their
age, informed about the correct and safe use of the player.
– If the appliance is equipped with aheadphone jack, do not use headphones set to an
extreme volume. There is adanger of hearing damage or loss.

EN 3
EN
06/2016
2016
Important safety instructions
Installation, operation
– Install the appliance according to the instructions in the user’smanual.
– Leave free space on all sides of the appliance necessary for proper air circulation.
This removes the heat created during operation. Covering the ventilation openings
of the appliance’scase creates arisk of overheating or damaging the appliance.
It is necessary to ensure that the ventilation openings are not blocked, e.g. by
anewspaper, table cloth, curtain, etc. Follow the installation instructions in the
user’smanual.
– This appliance should not be located in aconfined area such as abookshelf or rack, if
sufficient ventilation is not provided for or the instructions of the manufacturer are not
followed.
– Never insert any items into any ventilation or other openings because they could
come into contact with points with dangerous voltage levels or cause ashort circuit of
parts, which could cause afire or injury by electric shock. Never pour any liquid into
the appliance.
– Do not install the appliance in direct sunlight or near sources of heat, such as
heaters, heat exchangers, stoves or other appliances (including amplifiers) producing
heat. High temperatures significantly reduce the lifetime of electronic components in
the appliance. Do not use or leave the appliance in the vicinity of an open fire.
– The appliance must not be exposed to dripping or running water and objects filled
with water must not be placed on it, e.g. vases. Protect the appliance against rain,
spray or contact with any other liquid, do not leave or install the appliance outdoors.
Do not use the appliance outdoors. Not adhering to these instructions creates arisk of
electrical shock or fire hazard.
– Do not use this appliance near water.
– Treat the glass panel and appliance cover with care. The screen glass can break on
impact and cause serious injuries.
– Make sure that the power cord is not stepped on or compressed, particularly near the
power plug, power socket and at the point where it exits the appliance or the adapter.
The power plug (adapter) is used as adisconnection device and must be easily
accessible.
– Never use aappliance with adamaged power cord or plug. If the power cord or plug
are damaged, turn off the appliance, disconnect it from the power source and contact
an authorised service centre. Adamaged power cord or plug may only be replaced
by qualified personnel. Under no circumstances attempt to replace the power cord or
plug yourself.
– Do not attempt to circumvent the polarised power plug safety feature. If the power
plug cannot be inserted into your power socket, contact aqualified electrician to
replace the old type of power socket.
– Before connecting the appliance into apower socket, check that the voltage in your
power socket corresponds to the voltage on the rating label of the appliance or on
its power adapter. If you are not certain about the type of the power sources in your
home, contact your vendor or the local energy company.

4 EN
EN
06/2016
2016
Important safety instructions
– Before turning on the appliance, check that the electrical connection is performed
properly and in accordance with the instructions of the manufacturer. Before
connecting or changing the connection, turn off the appliance and disconnect it from
the mains.
– Remember to always disconnect the power plug (adapter) from the power socket
before disconnecting the power cable from the rear side of the appliance.
– Insert the power plug into aindependent power socket. Do not overload wall sockets
with extension cords or multi-socket adapters. There is arisk of injury by electric shock.
– When disconnecting, hold the power cord by the plug and not by the cord itself.
– Disconnect the appliance from the power socket during storms or if you will not be
using it for alonger time.
– Avoid moving the appliance from acold environment to awarm one or vice versa, or
when using the appliance in avery humid environment. Air humidity may condense
on some components inside the case of the appliance and the appliance may stop
working temporarily. If this occurs leave the appliance in awarm and well ventilated
place and wait 1 – 2 hours until the moisture evaporates and the appliance can
once more be used as usual. Take care especially during the first use of the player
immediately after its purchase during acold season.
– Do not place this appliance on an unstable cart, pedestal, stand, bracket or table.
The appliance could fall and cause serious injuries to children or adults or could
be seriously damaged or damage other items. Only use the appliance with
acart, pedestal, stand or table designated by the manufacturer or sold with the
appliance. Any mounting of the appliance should be carried out according to the
manufacturer’sinstructions and the mounting accessories recommended by the
manufacturer should be used.
– Do not lean on the appliance, do not lean over it or use it as astep. Protect it against
violent movements. Ensure that children do not play with the appliance.
If using the cart, be careful when moving it. Stopping suddenly, excessive force
and uneven surfaces could cause the cart to fall over with the appliance.
– Neither the manufacturer nor the vendor of the appliance under any condition
takes responsibility for any direct or indirect damages caused by not adhering to
the instructions for installation, setup, use, service or cleaning of this appliance as
described in this user’smanual.
– Protect the appliance against being knocked, dropped, hit and shaken and against
vibrations, humidity and dust.
– Do not expose the appliance to extreme temperatures or humid conditions.
Note:
If the appliance is powered by an adapter, use only the adapter and AC power cord
supplied with the appliance. Do not use faulty power sockets. Check that the power
plug is properly inserted into the power socket. If the power plug is loose, arching could
result in afire. Contact aqualified electrician to have your socket replaced.

EN 5
EN
06/2016
2016
Important safety instructions
Note:
Only connect the appliance to aproperly grounded socket with aprotective grounding pin.
Note:
If you will be installing the appliance on awall or to the ceiling, follow the
manufacturer’sinstruction found in the user’smanual of the particular appliance.
Repairs and maintenance
– To prevent risk of injury through electric shock or the creation of afire, do not take
the appliance out of the case - there are no parts inside the case repairable or
adjustable by the user without appropriate equipment and qualifications. Should the
appliance require adjustment or repair, contact aprofessional service centre.
– In the case of any unusual events occurring during the use of the appliance, e.g. if
there is adistinct smell of burning insulation or smoke comes out of the appliance,
immediately turn off the appliance, disconnect the appliance from the power source
and do not use the appliance until you have received the results of an inspection by
the employees of the professional service centre.
– Have all repairs carried out by qualified personnel. Repairs are necessary if the
appliance has been damaged in any way, for example if the power cord is damaged,
liquid was poured on the appliance, foreign objects have entered the appliance, the
appliance has been exposed to rain or moisture, if the appliance is not working as
usual or if it has fallen.
– In the event of repair or replacement of apart of the appliance, ensure that the
service technician uses components designated by the manufacturer or that these
components have the same specifications as the original ones. Unauthorised
replacements could cause afire, lead to adanger of injury by electrical shock or other
dangers.
– Before cleaning, carrying or other maintenance, disconnect the plug (adapter) from
the power socket.
– Clean the appliance only with adry cloth.
– For cleaning do not use petrol, thinners or any other solvents or use any abrasive
cleaning agents, steel wool or any sponges with steel wool.
Note:
Do not throw the appliance into ordinary household waste. For disposal follow all local
laws and regulations.

6 EN
EN
06/2016
2016
Important safety instructions
Remote control and batteries
– Do not expose the remote control or the batteries to direct sunlight or sources of heat,
such as heaters, heat exchangers, stoves or other appliances (including amplifiers)
that produce heat. Do not use or leave the appliance in the vicinity of an open fire.
– Ensure that the sensor is not exposed to astrong light source (e.g. sunlight) or light
from fluorescent light tubes, which could reduce the effectiveness and reliability of the
remote control.
– Neither the remote control nor the batteries may be exposed to dripping or running
water and objects filled with water must not be placed on them, e.g. vases. Protect
against exposure to rain, spraying or pouring of any kind of liquid. Do not use
outdoors. Not following these instructions creates adanger of damage to the remote
control or to the battery.
– Do not use this appliance near water.
– It is necessary to pay attention to the environmental impact aspects of battery
disposal.
– The incorrect use of batteries may cause the leakage of the electrolyte and corrosion.
To ensure that the remote control works correctly, proceed according to the
instructions below:
- Do not insert the batteries in the wrong polarity orientation.
- Do not charge, heat, open or short circuit the batteries.
- Do not throw batteries into afire.
- Do not leave discharged batteries in the remote control.
- Do not combine various types of batteries or new and old batteries.
- If you will not be using the remote control for alonger period of time, remove the
batteries to prevent potential damage caused by asubsequent battery leakage.
- If the remote control is not working correctly or its operational range is reduced,
change all batteries for new ones.
- If electrolyte leaks out from the batteries, have the remote control cleaned by an
authorised service centre.
ATTENTION
To prevent afire hazard or injury by electrical shock, do not expose this
appliance to rain or humidity.
ATTENTION
Batteries must not be exposed to excessive heat, for example sunlight, fire, etc.
This symbol indicates that the appliance has double insulation between the
dangerous mains voltage and the parts accessible to the user. In the event of
repairs use only identical spare parts.

EN 7
EN
06/2016
2016
Important safety instructions
Supplement to the LCD TV user'smanual
Measures to take when astatic image is displayed; red/blue/green pixels on the screen
Astatic image can permanently damage the display part of the television
– Do not leave astatic image on an LCD screen for longer
than 2 hours, because this could damage the screen. This
type of damage is known as "screen burn-in".
– Similar damage to the LCD screen can be caused by
astatically located TV channel logo.
– Watching television in 4:3, 16:9 formats or similar (formats not covering the entire area
of the screen) for along time may leave marks on the right or left side, or possibly in
the middle of the picture as aresult of the differences in light emission. Similar damage
may also occur when watching aDVD or playing games.
– The display of astatic image from video games or computers for an extended period
of time may cause apartial effect of a"persistent image". To prevent this effect from
occurring, lower the brightness and contrast when displaying astatic picture.
Damage to the screen resulting from the above mentioned causes is not covered by the
warranty!
Red/blue/green/black pixels may appear on the screen
– This is a characteristic feature of liquid crystal displays and does not represent
aproblem. LCD screens are manufactured using avery precise technology in order to
achieve avery fine picture resolution. From time to time several inactive pixels may
appear on the screen as apermanently red, blue, green or black pixel (up to 0.001% of
the total number of pixels on the screen). This does not in any way affect the features
and performance of your television.

8 EN
EN
06/2016
2016
Important safety instructions
Notes on the USB connector:
– USB memory devices must be inserted into the appliance directly. To prevent data
transmission failure or its interference, do not use USB extension cables. Electrostatic
discharges may cause the appliance to malfunction. In such an event the user must
restart the appliance.
– Before using aUSB flash drive test its ability to communicate with the appliance and
its data reading and writing speed.
– To achieve maximum reading speed we recommend that you keep disk space
defragmented. Use the FAT32 file system, asingle partition, without protection. If reading
and writing on the USB memory device is not continuous, undesirable effects may occur
such as partial image loss (distortions/checkering effects) or complete image loss, audio
defects, and in extreme cases the operation will be stopped. Unexpected behaviour of the
connected memory device, or the presence of viruses or other damaging software may
cause the functions of the appliance to stop working, necessitating arestart.
– The USB connector is the standard type and is not able to power aUSB device with
ahigh power usage (e.g. hard disk drives HDD). Use devices with independent power
supplies and power them from their own power supplies.
– The appliance was designed to achieve maximum compatibility with memory devices.
With respect to the variety of devices on the market it is not possible to guarantee
compatibility with every USB device. In the event of difficulties try formatting the
flash drive directly in the appliance. If problems persist, use adifferent flash drive.
Due to the wide range of USB devices available on the market it is not possible to
guarantee the compatibility of the appliance with all USB devices.
Serial number of the appliance
The serial number of the appliance is unique and unequivocally identifies your appliance.
Enter the serial number of your appliance together with other details necessary for the
definite identification of your appliance below.
Serial number: ______________________________________
Date of purchase: ____________________________________
Note:
1. The graphics in this manual is informative.
2. The menu on your TV screen may be slightly different from the illustrations in this
manual.
3. The information in the document are subject to change without notice. The
manufacturer accepts no liability for damages incurred directly or indirectly from
errors, incompleteness or discrepancies between the instruction manual and the
product described.

EN 9
EN
06/2016
2016
Stand assembly
2. Stand assembly
Before attaching/detaching the stand, ensure the television is switched off and unplugged
from the power outlet.
Before performing work spread cushioning (e.g. soft blanket) over the base area to lay
the LED TV on this will prevent it from being damaged. Make sure the stand is properly
assembled so that the TV would be stable.
Place the assembled television on a solid and flat base.
Stand installation instructions
BB4×12 (4pcs)

10 EN
EN
06/2016
2016
Device description
3. Device description
3.1. Control panel button function
The buttons on the lower-right panel control your TV´s basic features, including the
on-screen menu. To use the more advanced features, you should use the remote control.
Note:
Pictures are only for illustration.
1. Turn on/off
2. VOL-
3. VOL+
4. CH-
5. CH+
6. MENU: into or exit from the menu (use CH+/-
buttons to select item, use VOL+/- buttons to
adjust items)
7. INPUT: source select
VOL+/-: adjust volume
CH+/-: channel select
3.2. TV terminal connections
1. VGA/PC IN: connect to the video
output jack on your pc
2. AUDIO: connect to the audio output
jack on your PC
3. SCART: SCART input
4. RF IN: connect to an antenna or
cable TV system
5. HDMI1: connect to the HDMI1 jack of
a device with and HDMI output
6. HDMI2: connect to the HDMI2 jack
of a device with and HDMI output
7. HDMI3: connect to the HDMI3 jack
of a device with and HDMI output
8. COAX: connect coaxial out
9., 10. AV/YPbPr IN: composite audio or
component audio
11. CI: CI input
12. USB: connect to USB flash drive to
play supported multimedia content
13. EARPHONE OUT: audio output for
external devices

EN 11
EN
06/2016
2016
Remote control
4. Remote control
1. POWER button
Turns the television on/from the
stand-by mode.
2. INPUT button
Press to select the desired input.
3. NICAM button
NICAM/A2 input or output.
4. ASPECT button
Page aspect ratio selection, e.g. 16:9,
Zoom, Auto, 4:3.
5. PMODE button
Press repeatedly to select a picture
mode.
6. SMODE mode
Press repeatedly to select a sound
mode.
7. Numerical buttons 0–9
Press 0–9 buttons directly to select
a TV channel while watching the
TV. Enter the page number in the
teletext mode, etc.
8. --/- button
It is used to enter channel numbers
with various digit counts, e.g. 1 – 11
– 111.
9. RECALL button
Button to switch the previously
watched channel.
10. FAV button
Press to enter/exit the favourites
menu in the TV mode.
11. FREEZE button
Freeze picture
12. TV/RADIO button
Switch between the television and
radio modes
13. SLEEP button
Set the automatic shut off time for
the television.
14. EPG button
Press to show/hide the electronic
program guide.

12 EN
EN
06/2016
2016
Remote control
15. ////ENTER buttons
Used to navigate in a menu on the screen and to set up the TV according to your
preferences.
ENTER button
Used to enter/exit the channel list menu (DTV/ATV only).
16. MENU button
It displays TV main menu in TV mode.
17. EXIT button
Exit the menu or a screen.
18. VOL+/- buttons
Press to increase/decrease the volume.
19. CH +/- buttons
Press to switch among channels.
20. DISPLAY buttons
Press to show the source and information about channels.
21. MUTE button
Press to mute the sound. Press is again to restore the sound or press VOL + button.
22. HOLD/ button
HOLD button: hold the current display
 button: play/pause or start a time shift recording.
23. REVEAL/button
REVEAL button: Press REVEAL button to display / hide hidden teletext information
(depends on the broadcast).
button: fast rewind
24. SIZE/button
SIZE button: Press SIZE button to change the size of the screen in MEDIA mode.
button: fast forward
25. INDEX/button
INDEX button: call up a teletext content page.
button: stop recording / playback
26. button
Skip to previous track.
27. S.PAGE/button
S.PAGE button: Press S.PAGE button to enter a teletext subpage.
button: skip to the next track
28. TTX button
Turn teletext on / off.
Note: The teletext function is optional and the availability of buttons depends on the
model. Teletext information fully depends on the operator of the channel.
29. T.SHIFT button
It is used to start recording with a time shift (i.e. time shift). Function is only available
in the DTV mode and connected USB flash memory.

EN 13
EN
06/2016
2016
Remote control
30. AUDIO button
DTV/MEDIO mode: select a background sound if available.
ATV mode: select a sound mode: Stereo / Dual I/II / Mono.
Other sources: select left/right channel
31. SUBTITLE button
Press to show/hide subtitles in the bottom part of the screen, if they are available.
32. AUTO/REC button
AUTO button: used for automatic configuration in PC mode.
REC button: press to start recording (only DTV mode).
33. PVR button
It is used to enter/exit the PVR setting menu.
Note:
Remove batter during storage or when you are not using the device for a long time.
To control the device using the remote control, point the remote control at the
device and then press the button with the required function. The maximum range
of the remote control is about 5 meters with a deviation of up to +/- 30° from the
perpendicular direction to the reception sensor of the remote control on the front side
of the device. The falling capacity of the batteries gradually reduces the remote control
range. There must be no solid obstacles in the area between the remote control and
the device when the remote control is being used. During standard use the lifetime of
batteries in the remote control is about 1 year. When the effective range of the remote
control is substantially reduced, or when there are problems with its use, change both
the batteries in the remote control. If you are not using the remote control for a longer
period of time, take out both batteries from it – in this way you will prevent potential
damage caused by their leakage.
Avoid strong impact of light (e.g. sunlight or light from strong fluorescent/saving
sources) which can reduce the effectiveness and reliability of IR remote control.

14 EN
EN
06/2016
2016
First time setup
5. First time setup
Press INPUT button to display the input source list.
Press / or OK button to select the desired input source.
Press OK button to enter the input source.
Press EXIT button to quit.
Connect an RF cable from the Tv’s input called “RF-In” and to your TV Aerial socket
(antenna, common antenna, cabel, …).
5.1. Select Language
Press / button to select the language to be used for menus and message.
5.2. Select Country
Press / button to highlight country menu.
Press / button to select the country you want to.

EN 15
EN
06/2016
2016
First time setup
5.3. Surrounding
Choose between Home (Home/Off) or Shop (Shop/On).
Note: Using of Shop, the system will set some parameters of the device to the highest
settings to present the device in a surrounding with extreme lightning, accompanying
by higher ballast and consumption. Therefore, the switch to a Shop surrounding is
accompanied by a question of the device where you should confirm your aim.
For common use, it is recommended to set Home surrounding.
5.4. Auto Tuning
Select among Analogue (ATV) or digital (DVT) or leave both sources ATV+DTV. ATV tuning
will start first. If you want to skip ATV tuning, press MENU button and left arrow button.
Then DTV tuning will start. To skip DTV tuning, press MENU button and left arrow button.

16 EN
EN
06/2016
2016
First time setup
Note:
If an automatic tuning do not find any receivable channel (e.g. inconvenient antenna)
or you have paused it manually, you can still tune channels manually, one by one, as
it is described down in the manual. To do so, you will need some technical data about
channel you wish to tune, such as broadcast way, frequency, audio modes, broadcast
speed etc.
A successful finished automatic tuning ends by saving the list of available TV channels
and radio stations that you can take in. In case of a multiple presence of the same or
similar channels (e.g. due to a local variations of the same central channel or distant
interference or local “net” reception), verify which channels will suit you more and amend
the list if necessary.

EN 17
EN
06/2016
2016
Menu
6. Menu
6.1. Channel menu
Press MENU button to display the main menu.
Press / button to select CHANNEL in the main menu.
1. Press / button to select the option that you want to adjust in the CHANNEL menu.
2. Press Enter button to adjust.
3. After finishing your adjustment, Press Enter button to save and return to the previous
menu.
6.1.1. Auto tuning
Press / button to select Auto Tuning, then press Enter/button to enter.
The system will run the same operation as for the first time setup, all previously channels
will be deleted.

18 EN
EN
06/2016
2016
Menu
6.1.2. ATV manual tuning
Current CH
Set the channel number.
Color System
Select the color system (available systems: AUTO, PAL, SECAM).
Sound System
Select the sound system.
Fine-Tune
Adjust the frequency of the channel finely.
Search
Start searching channel.