SharkRack V210 User manual

V210/V240-R19-H Rack Mount Kit
Installation Guide
SHP900006-000 4/11/05 Rev 2.0 Page 1of 4
Proprietary Information of SharkRack, Inc.
23842 Cabot Blvd., Hayward, CA 94545
87(SHARKRACK) •877-427-5722 •www.sharkrack.com

V210/V240-R19-H Rack Mount Kit Installation Guide
SHP900006-000 4/11/05 Rev 2.0 Page 2of 4
Step Detail
1. Separate the Slide Assemblies by detaching the Inner
Slide Member from the Outer Slide Member. Remove
the Inner Slide Member from the Slide Assembly by first
fully extending the Inner Slide Member. Next depress
the slide stop, which allows for the Inner Slide Member
to be detached.
2. Attach the Inner Slide members to both sides of the
server using (5) M4 pan head screws.
3. Adjust the Slide Mounting Brackets to the correct
Depth. To adjust:
•Loosen the two nuts at the rear of the slide
using a 11/32” wrench
•Move the Rear Slide-Mounting bracket to the
correct depth
•Tighten the nuts.

V210/V240-R19-H Rack Mount Kit Installation Guide
SHP900006-000 4/11/05 Rev 2.0 Page 3of 4
Step Detail
4. Install the Outer Slide Member in the rack enclosure.
Attach the Front Mounting Bracket to the Front Rack
Rail using (2) 10-32 x 1/2” pan head screws. Attach the
Rear Mounting Bracket to the Rear Rack Rail using (3)
10-32 x 1/2” pan head screws.
5. Repeat step 3 for the left Outer Slide Member.
6. Install the server into the rack enclosure. Approach
the rack with the rear of the server facing the rack
enclosure. Align the Inner Slides on the server with the
Outer Slide Rails attached to the rack enclosure. Slide
the server all the way into the rack enclosure until it
stops. The slides will lock into place in the slide rails.
7. Secure the server in the rack by tightening the (2)
thumbscrews mounted on either side of the server’s
front bezel.

V210/V240-R19-H Rack Mount Kit Installation Guide
SHP900006-000 4/11/05 Rev 2.0 Page 4of 4
Warranty
LIMITED WARRANTY AND WARRANTY DISCLAIMER -Seller warrants that the System will be free from defects
in materials and workmanship for a period of one (1) year from date of delivery to customer premises. Seller’s
sole liability and Customer’s sole and exclusive remedy for any breach of this warranty is, at Seller’s option and
expense, to repair or replace any defective System that is returned to it by Customer. Seller will have no
obligation under this section to the extent any defect in the System is caused by or is attributable to negligence,
accident, misuse, abuse, use of the System than in accordance with Seller’s documentation or user manual,
modifications, alterations or repairs to the System made by a party other than Seller, or actions of third parties or
like events outside Seller’s reasonable control. EXCEPT AS EXPRESSLY SET FORTH IN THIS SECTION, TO
THE EXTENT PERMITTED BY APPLICABLE LAW, SELLER DISCLAIMS ANY AND ALL OTHER
WARRANTIES, WHETHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, WITHOUT LIMITATION, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUALITY, OR
NONINFRINGEMENT, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF
TRADE.
LIMITATIONS OF LIABILITY -IN NO EVENT WILL SELLER BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOST PROFITS OR REVENUE, LOSS OF
USE, LOST BUSINESS OPPORTUNITIES OR LOSS OF GOODWILL), OR FOR THE COSTS OF PROCURING
SUBSTITUTE PRODUCTS, ARISING OUT OF OR IN CONNECTION WITH THESE TERMS OF SALE OR THE
USE OF THE SYSTEM, WHETHER SUCH LIABILITY ARISES FROM ANY CLAIM BASED UPON CONTRACT,
WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, WHETHER OR
NOT SELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS OR DAMAGE. IN NO EVENT
WILL SELLER’S TOTAL CUMULATIVE LIABILITY, FROM ALL CAUSES OF ACTION AND ALL THEORIES OF
LIABILITY, EXCEED THE TOTAL AMOUNTS ACTUALLY PAID TO SELLER BY CUSTOMER UNDER THE
ORDER THAT GIVES RISE TO ANY LIABILITY HEREUNDER.
During the warranty period, purchaser must promptly call SharkRack (877-427-5722) to log any such defects in
materials and workmanship.