SHINE SRFP109 User manual

MODEL # SRFP109
39'' ROUND PEDESTAL FIRE PIT
1
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-814-0585, 8 a.m. - 5 p.m., EST, Monday - Friday.
E-mail : [email protected]

PACKAGE CONTENTS
2
NOITPIRCSEDTRAP QUANTITY
A Screen hook 1
B 1
C
Screen
1
D Fire bowl
E
Pedestal
F Base
1
1
1
NOITPIRCSEDTRAP QUANTITY
AA
BB
CC
DD
A
EE
B
C
D
E
F
Charcoal grid

SAFETY INFORMATION
HARDWARE CONTENTS (shown actual size)
3
PREPARATION
WARNING: TO AVOID INJURY
D6 Washer
Qty. 9
M6
Double End Screw
Qty. 3
M6 Nut
Qty. 6
AA EE
CC DD
BB
M6
Ring Screw
Qty. 1
Qty. 1
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 20 minutes
Tools required for assembly: Phillips screwdriver (Not included).
Assemble the fire pit on a non-abrasive surface
 FOR OUTDOOR USE ONLY
Do not use the fire pit indoors. Lack of ventilation due to carbon monoxide fumes can cause death.
Do not use gasoline or kerosene to start fires in the fire pit. Keep all flammable liquids away from
the fire pit.
This unit is designed to burn charcoal and untreated wood only.
Do not use under or on combustible structures/surfaces including wooden decks.
Use protective gloves and long-handled tools with this fire pit.
Dispose of packaging materials properly.
Keep children away from hot fire pit.
Fire pit remains very hot for a period of time after using.
Be sure fire pit is cool before attempting to move it.
Do not burn charcoal over 1.6 lbs. or over 3 lbs. of untreated wood at one time.
The handle of the screen hook may become hot during and after use. The fire pit should not be
used on a combustible surface (including wood decks), and should be placed no closer than
24 in. from walls during use.
Don’t touch the screen ring during using until the fire is completely out and cooled down, use the
screen hook to lift the screen.
M6
Flange Nut

4
ASSEMBLY INSTRUCTIONS
Hardware Used
BB x3
M6 Nut
CC x3
M6 Double End Screw
DD x3
D6 Washer
2. Attach pedestal (E) to base (F) with three M6
nuts (BB), D6 washers (DD)and M6 double end
screws (CC) mentioned in step 1.
1
2
D
F
1. Detach the fire bowl (D) and base (F) by
unscrewing three M6 double end screws
(CC).
CC
CC E
F
DD
BB
Hardware Used
CC x3
M6 Double End Screw

5
ASSEMBLY INSTRUCTIONS
4. Attach M6 ring screw (EE) to the top of screen (B)
with one M6 flange nut (AA).
Warning: Always use the screen hook to lift the
screen while this fire pit is in use or remains hot.
.
4
EE
B
AA
Hardware Used
BB x3
M6 Nut
DD x6
D6 Washer
3. Attach fire bowl (D) to base assembly with three
M6 nuts (BB), six D6 washers (DD). 3
BB
D
DD
Hardware Used
AA x1
M6 Flange Nut
EE x1
M6 Ring Screw

6
ASSEMBLY INSTRUCTIONS
5
5. Place all parts onto the fire pit in the
order as shown.
A
C

7
CARE AND MAINTENANCE
Inspecting
Inspect this fire pit on a regular basis to ensure product safety and longer product life.
DO NOT attempt to inspect this outdoor fire pit until the fire is COMPLETELY out and cooled down.
Check handles to make sure they are secure.
Check components for any signs of damage or rust.
If any component is damaged, do not operate until repairs are made.
Cleaning
Clean this outdoor fire pit on a regular basis to promote safer use and longer product life.
Note: After repeated use, the finish may discolor slightly.
DO NOT attempt to clean this outdoor fire pit until the fire is COMPLETELY out and cooled down.
DO NOT use oven cleaner or abrasive cleaners as they will damage this product.
DO NOT clean any part of this outdoor firepit in a self-cleaning oven as it may damage this finish.
 Wipe exterior surfaces with a mild dishwashing detergent or baking soda.
For stubborn surfaces use a citrus-based degreaser and a nylon scrubbing brush.
Rinse clean with water.
Remove built-up creosote from components with a chimney cleaning product.
Storage
DO NOT move or store this outdoor fire pit until the fire is COMPLETELY out and cooled down.
Once the fire is out, coals are cold and outdoor fire pit is cool to touch, remove ashes and
properly dispose.
Store this outdoor fire pit in a dry location to maximize product life.
Store assembled in a location away from children and pets.
ONE-YEAR LIMITED WARRANTY