Shoprider 6Runner 10 User manual

Mid-Wheel Powerchair
USER MANUAL
Model:
6
R
u
nn
e
r 1
0
(888
WNLM
)

2
Table of Contents
INTRODUCTION .................................................................................................. 3
EMI WARNING..................................................................................................... 4
ELECTROMAGNETIC INTERFERENCE FROM RADIO WAVES........................ 4
POWERED CHAIR ELECTROMAGNETIC INTERFERENCE (EMI).................... 5
SAFETY INSTRUCTIONS................................................................................. 6-7
FEATURE GUIDE................................................................................................. 8
GETTING TO KNOW YOUR SHOPRIDER .................................................... 9-10
THE JOYSTICK CONTROLLER (VR2 or Shark)........................................... 11-12
LOCKING / UNLOCKING THE JOY STICK CONTROLLER………………….13-14
DRIVE/FREEWHEEL MECHANISM................................................................... 15
DRIVING YOUR POWERCHAIR ...................................................................... 16
CARING FOR YOUR POWERCHAIR................................................................ 17
BATTERIES AND BATTERY CHARGING .................................................... 18-20
TROUBLESHOOTING .................................................................................. 21-22
SPECIFICATIONS.............................................................................................. 23
QUARTERLY INSPECTION............................................................................... 24
NOTES ............................................................................................................... 25
DISCLAIMER ..................................................................................................... 28

3
INTRODUCTION
Congratulations on insisting on the best. Shoprider Powerchairs are the ultimate
combination of style and comfort. The 6Runner 10 features support easy
maneuverability and smooth control for today’s active lifestyle.
The innovative design of the 6Runner 10 includes articulating double frames that
move in any direction. This intelligent feature keeps all 6 wheels on the ground at all
times, even when driving on uneven terrain, hence the name 6Runner 10. Combine
this with the programmable joystick controller, adjustable arm assemblies, flat-free
tires, deluxe reclining captain seat, easy access to batteries and quick-change color
shrouds for a complete powerchair package. We know that your 6Runner 10
Powerchair will provide many years of dignified independent mobility.
This manual contains important information regarding the safe use of your Shoprider
Powerchair. Please read this manual carefully and thoroughly before using your
Powerchair and make sure you understand all the instructions.

4
EMI WARNING
Electromagnetic Interference (EMI) from Radio Wave Sources
Powered electric chairs may be susceptible to electromagnetic interference, which is a
kind of interfering electromagnetic energy (EM) emitted from sources such as radio
stations, TV stations, amateur radio (HAM) transmitters, two-way radios and cellular
phones. The interference (from radio wave sources) can cause the power chairs to
release its brakes, move by itself or move in unintended directions. It can also
permanently damage the powered chair’s control system.
The sources of radiated EMI can be broadly classified into three types:
1. Hand-held portable transceivers (transmitters-receivers) with the antenna
mounted directly on the transmitting unit. Examples include: citizens band (CB)
radios, “walkie talkies”, security, fire and police transceivers, cellular telephones
and other personal communication devices
NOTE: Some cellular telephones and similar devices transmit signals while
they are ON, even when not being used.
2. Medium-Range mobile transceivers, such as those used in police cars, fire trucks,
ambulances and taxis. These usually have the antenna mounted on the outside
of the vehicle.
3. Long-Range transmitters and transceivers, such as commercial broadcast
transmitters (radio and TV broadcast antenna towers) and amateur (HAM) radios.
NOTE: Other types of hand-held devices, such as cordless phones, laptop
computers, AM/FM radios, TV sets, CD players, cassette players and small
appliances such as electric shavers and hair dryers, so far, as we know, are
not likely to cause problems to your Powerchair.

5
Power Chair Electromagnetic Interference (EMI)
Because EM energy rapidly becomes more intense the closer one moves to the
transmitting antenna (source), the EM fields from hand-held radio sources (transceivers)
are of special concern. It is possible to unintentionally bring high levels of EM energy
very close to the Powerchair’s control system while using these devices. This can affect
the Powerchair’s movement and braking. Therefore, the warnings listed below are
recommended to prevent possible interference with the control system of the
Powerchair.
WARNINGS
The following warnings listed below should reduce the chance of unintended brake
release or Powerchair movement, which could result in serious injury.
1. Do not operate hand-held transceivers (transmitter-receivers), such as citizens
band (CB) radios, or turn ON personal communication devices, such as cellular
phones, while the Powerchair is turned ON.
2. Be aware of nearby transmitters, such as radio or TV stations, and try to avoid
coming close to them.
3. If unintended movement or brake release occurs, turn the Powerchair OFF as
soon as it is safe.
4. Be aware that adding accessories or components, or modifying the Powerchair
may make it more susceptible to EMI.
NOTE: There is no easy way to evaluate the overall immunity of the powered
chair.
Report all incidents of unintended movement or brake to your Powerchair provider, and
note whether there are sources of EMI nearby.
NOTE: The VR2 or Shark controller EMI rating is FDA Regulated and conforms to
federal regulations.

6
Safety Instructions
Please use your Powerchair often and let it expand your horizons. The more
mobility your Powerchair brings, the happier you will be! But, with all things,
observing a few rules will ensure safe maneuvering. So please…
(1) Do not drive the Powerchair without reading this instruction manual.
(2)
Do not use the joystick in an erratic manner when going up or down an incline.
(3) Do not carry passengers or exceed the maximum user weight (Table 3).
(4) Do not turn off the joystick controller by switching the On / Off Button
when moving at speed. This will bring the electromagnetic brakes on immediately
and could cause damage to the joystick controller.
(5) Do not drive over uneven or soft terrain.
(6) Do not attempt to drive over curbs greater than 1.5 inches in height. Doing so could
cause your scooter to turn over, causing personal injury or damage to the scooter.
For curbs less than 1.5 inches, always approach them at an angle of 90 degrees and
at a low speed.
(7) Do not mount or dismount the Powerchair unless the electromagnetic
brakes are engaged and the joystick controller is off.
(8) Do not operate the Powerchair if the unit is in freewheel mode.
(9) Do not use on the road, except when crossing between sidewalks.
(10) Do not sit on the Powerchair when in a vehicle, but transfer to a vehicle seat.
(11) Do not exceed any grade over 6 degrees (10%).
(12) Always stop fully before changing forward or reverse direction.
(13) Always engage a slow speed when going down gradients (move the joystick slowly
towards center position to reduce the speed).
(14) Always approach and climb over curbs at slow speed.
(15) Always use the safety belt.
(16) Always keep feet on the footrest while driving.
(17) Always make sure the batteries are fully charged before setting out on a journey.
(18) Always make sure the Allen bolt, hex screws and nuts of the seat adaptor and seat
post are securely tightened before driving the Powerchair.

7
(19) Always charge the Powerchair in a well ventilated area.
(20) Whenever a center bolt of the wheel assembly has been loosened, please replace
with a specified new bolt from authorized providers and secure with a torque of 240
± 5 kg-cm together with Loc-tite 271 adhesive (or equivalent).
(21) When proceeding up any incline, please move the seat to the most forward
position or if you have the deluxe seat, make sure that it is in the 90 degree
(upright) position.
(22) Do not adjust the programmer or modify the controller and cables without prior
written approval from the manufacturer. Otherwise injury and/or damage to the
Powerchair or surrounding property may occur.
(23) Do not modify any parts on the unit without manufacturer’s written approval, or your
warranty will be voided and you will be responsible for the modification.
(24) Charge the batteries before using and charge batteries daily after use.
(25) Battery cables must be securely fastened onto battery terminals by the authorized
dealer before using the unit. Batteries must be tied down correctly and securely.
(26) Use caution and reduce speed when turning.
(27) Avoid using the powerchair in wet conditions.
(28) The chassis cover must be properly adjusted. The Velcro on the underside of the
shroud should be aligned with the Velcro attached to the support brackets on the
base of the unit. Make sure that the circuit breaker is properly aligned with the slot
in the shroud to avoid any hindrance to the circuit breaker’s operation and use.
(29) Do not use the powerchair as a seat in any vehicle.
Remember! Give consideration to pedestrians whenever using the Powerchair.
You are a motorized pedestrian and must observe all rules and
regulations of other pedestrians wherever possible.
Important Notes
The Shoprider Powerchair is designed to assist in your individual mobility needs. Any
usage outside of the guidelines in this manual may result in damage to the chair or
injury to the user or third party.
Please do not lift the wheelchair by the armrests.

8
Feature Guide (Fig. 1)
(1) Headrest (adjustable with selected height)
(2) Armrest (adjustable with selected width, angle and height)
(Flips Up for Easy Sideways Transfer)
(3) VR2 or Shark Joystick (mounted onto the armrest) &
Main Controller (mounted onto the frame)
(4) Charging Port
(5) Deluxe Reclining Captain Seat
(6) Footrest
(7) Front Castor Assembly (7”)
(8) Main Drive Wheel (10”)
(9) Rear Castor Assembly (7”)
(10)Chassis Shroud
Fig. 1
(1)
(2)
(3)
(5)
(6)
(7) (9)
(10)
(4)
(8)

9
Getting to Know Your Shoprider Powerchair
The Seat and Arm Assemblies
The seat is built for comfort, style, and stability. Your seat comes with a reclining back
for comfort. The flip-up arm-rests are especially built for easy side access for getting in
and out of your 6Runner 10, with the greatest of ease. The arm-rests have a built in
height adjustment knob, that adjusts the arm pad to a comfortable level for the driver.
The seat is covered in a durable long lasting gray vinyl for comfort and style.
Armrest Width Adjustments
Beneath the rear of the seat there are two hand knobs, one on each side. Release the
hand knob and slide each arm assembly outward. Re-tighten the hand knob when in the
desired position.
Flip up armrest
Armrest
height
adjustment
Hand knobs
Seat recline
lever

10
Seat Height Adjustment and Easy Battery Access
1. Tightening knob that allows for
the seat to be removed if needed,
if not, there is a pivot point that
allows for the seat to move up
and away from the base.
2. Adjustment pins that can be
used to adjust the height of the
seat to fit the user.
3. Release levers; allow for the
rear of the seat to be lifted and
moved away from the base for
easy battery access, without
removing entire seat.
4. U-Hooks hold the seat in place.
5. Bottom shroud is easily popped
off, to allow for battery access.
6. Philip screws that are used to
fasten the mounting plate for main
controller. Batteries can be easily
accessed and changed after the
removal of main controller assembly.
1
2
6
5
3
4