Shuttle PV02 User manual

Product Specification
www.shuttle.com
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. [phone]
Fax [phone]
[email protected]
Pa
g
e 1
|
24 Februar
y
2016
©2009 by Shuttl e Computer Handels GmbH (Germany). All Information subject to change without not ice. Pict ures for illustration puposes only.
VESA mount accessory PV02 –
for 3 litre Slim PCs
Its optional VESA75/100 wallmount allows compatible Shuttle Slim-PCs
of the 3-litre class to be installed on to walls or just affixed on the rear
side of a monitor which is particularly interesting for the industry
segment, company buildings and public institutions.
Feature Highlight
Scope of
delivery
VESA mount
2 screws
Marterial Metal, black
Dimensions approx. 22 x 10 x 8 cm WHD
(without mounting screw)
Compatibility
Compatible with Shuttle Slim PCs XG41,
XH61, XH61V, XH81, XH81V, XH97V,
XH170V, XH110 & XH110V
Supports 75 and 100mm VESA standards
Shuttle Accessor
y
PV02
Article number: PV02
Images for illustration purposes only.
Mounting screw

Product Specification
www.shuttle.com
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. [phone]
Fax [phone]
[email protected]
Pa
g
e 2
|
24 Februar
y
2016
©2009 by Shuttl e Computer Handels GmbH (Germany). All Information subject to change without not ice. Pict ures for illustration puposes only.
VESA Mount (PV02) – Quick Installation Guide
Please install with reference to the following
steps:
Due to safety reasons, please turn off your
computer completely first and unplug it
from the power supply.
Please unpack the PV02 VESA mount
accessory and two screws.
Fasten the VESA MOUNT at rear of LCD
monitor with two screws.
As shown, install the Slim PC in the VESA
MOUNT and push it towards the direction
as indicated by the red arrow.
Slide the latch into the lock position.
Check that it is properly aligned, then
tighten securely with one thumbscrew.




