SinoVoip Banana PI User manual

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
1
SinoVoip CO.,LTD
Banana PI
User Manual
<Version: V2.0 >

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
2
Banana PI is the open source hardware platform which published to assistant the
Elastos.org open source OS, Banana PI M1 is the dual core Android 4.2 product
which more better than the Raspberry Pi.
Banana Pi series run Android,Debian linux,Ubuntu linux, Raspberry Pi imange and
cubieboard imange.
Elastos coordinate multi CUP to from the family cloud entirnment which based on the
“software/hardware service”
Banana PI hardware: 1Ghz ARM7 dual-core processor, 1GB DDR3 SDRAM,
Banana PI with Gigabit ethernet port, SATA Socket. It can run with Android 4.2.2
smoothly. The size of Banana PI M1 like the credit card, it can easily run with the
game it support 1080P high definition video output, the GPIO compatible with
Raspberry Pi and can run the ROM Image directly
Hardware specification
CPU A20 ARM Cortex™-A7 Dual-Core
GPU ARM Mali400MP2Complies with OpenGL ES 2.0/1.1
Memory
(SDRAM) 1GB DDR3 (shared with GPU)
Onboard
Storage SD (Max. 64GB) / MMC card slot UP to 2T on 2.5 SATA disk
Onboard
Network 10/100/1000 Ethernet RJ45,optional WIFI
Video Input A CSI input connector allows for the connection of a designed camera module
Video
Outputs HDMI, CVBS , LVDS/RGB
Audio Output 3.5 mm Jack and HDMI
Power
Source
5 volt via MicroUSB(DC In Only) and/or MicroUSB (OTG)

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
3
USB 2.0
Ports
2 (direct from Allwinner A20 chip)
Buttons
Reset button: Next to MicroUSB connector
Power button: Next to Reset button
Boot button (Optional): Behind HDMI connector
GPIO(2X13)
pin
GPIO,UART,I2C bus,SPI bus with two chip selects,
CAN bus,ADC,PWM,+3.3v,+5v,ground.
LED Power Key & RJ45
Remote IR (Optional)
OS Android 4.2,Firefox OS and Linux etc. OS
Interface definition
Product size 92 mm × 60mm
Weight 48g
working
temperature
range
-15~75℃
Hardware
Front:

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
4
Back:

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
5
Interface

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
6
Hardware connect sketch map

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
7
Use method
Step 1: Get what you need
First time to enjoy your Banana Pi, you need at least the accessories in the table
below.
No. Item Minimu recommended specification & notes
1SD card
Minimum size 4Gb; class 4 (the class indicates how fast
the card is).
We recommend using branded SD cards as they are
more reliable.
2a
HDMI(Full sized)
to HDMI / DVI
lead
HDMI to HDMI lead (for HD TVs and monitors with
HDMI input).
OR
HDMI to DVI lead (for monitors with DVI input).
2b AV video lead
A standard AV video lead to connect to your analogue
display if you are not using the HDMI output.
3Keyboard and
mouse
Any standard USB keyboard and mouse should work.
Keyboards or mice that take a lot of power from the
USB ports, however, may need a powered USB hub.
This may include some wireless devices.
4
Ethernet
cable/USB
WiFi(Optional)
Networking is optional, although it makes updating and
getting new software for your Banana Pi much easier.
5Micro USB power
adapter
A good quality, micro USB power supply that can
provide at least 700mA at 5Vis essential.
Many mobile phone chargers are suitable—check the
label on the plug.
6Audio lead
(Optional)
You can choose a 3.5mm jack audio led to connect to
audio port to get stereo audio.
7Mobile Hard disk
You can choose to connect a mobile hard disk to SATA

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
8
(Optional) port to store more files.
HDMI to HDMI lead HDMI to DVI lead AV video lead
SD card Micro USB power adapter
Step 2: Download the relevant Image file:
Please visit our webmaster: www.banana-pi.com to download image, banana pi all
image can be download form this web.
Step3: Prepare your SD card for the Banana Pi
In order to enjoy your Banana Pi, you will need to install an Operating System (OS)
onto an SD card. Instructions below will teach you how to write an OS image to your
SD card under Windows and Linux.
1. Insert your SD card into your computer. The size of SD should be larger than
the OS image size, generally 4GB or greater.
2. Format the SD card.
Windows:
i. Download the a SD card format tool such as SD Formatter from
https://www.sdcard.org/downloads/formatter_4/eula_windows/

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
9
ii. Unzip the download file and run the setup.exe to install the tool on
your machine.
iii. In the "Options" menu, set "FORMAT TYPE" option to QUICK,
"FORMAT SIZE ADJUSTMENT" option to "ON".
iv. Check that the SD card you inserted matches the one selected by the
Tool.
v. Click the “Format” button.
Linux:
vi. Run fdisk –l command to check the SD card node.
vii. Run sudo fdisk /dev/sdxcommand to delete all partition of SD card.
viii. Run mkfs –t vfat /dev/sdxcommand to format the entire SD card as
FAT.
(x should be replaced according to your SD card node)

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
10
3. Download the OS image from Download district.
4. Unzip the download file to get the OS image.
Windows: Right click on the file and choose “Extract all”.
Linux: Run unzip [downloaded filename] command.
5. Write the image file to the SD card.
Windows:
i. Download a tool that can wirte image to SD card, such as Win32
Diskimager from:
http://sourceforge.net/projects/win32diskimager/files/Archive/
ii. Open the unzipped image file.
iii. Click Write button. Wait patiently to successfully complete writing.
Linux:
iv. Run fdisk –l command to check the SD card node.
v. Run dd if=[imagename] of=/dev/sdxcommand to write image file to
SD card. Wait patiently to successfully complete writing.
Step4: Set up your Banana Pi
According to the set up diagram below, you can easily set up your Banana Pi.

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
11
1. Insert the written-image SD card that to the SD card spot on the left side edge
of the underside of the board.
2. On the bottom "edge" in the middle of the board is the HDMI Type A (Full
sized) port, just on the right of the SATA port. Just connect any HDMI cable
from the board to your TV or HDMI Monitor.
If you don't have an TV/Monitor with a HDMI or DVI-D port you can use the
yellow AV jack located in the middle of the "top" edge and the 3.5 mm stereo
headphone jack to the right of it.
3. Plug a USB keyboard and mouse into the USB slots located on the right edge.
4. Just under the USB ports on the right edge is the ethernet connector for anyone
who wants to plug the Banana Pi into a wired network.
5. Finally, at the very left of the bottom edge is the micro-usb power
connector. Plug in a regulated power supply that is rated at 5V ±5% and at
least 700mA (or 0.7A). Any number bigger than 700 mA (like 1000mA) will
also work. Avoid using the smaller chargers used for small GSM phones, as
these are often unregulated, even if they claim "5V 1A", they may do "5V"
and may do "1A", but not at the same time!
The mini-USB (on the left) is the wrong one. It’s thicker and looks like a
trapezoid with its sides pinched in. The micro-USB (on the right) is the
correct one. It is thinner and also looks like a trapezoid except it’s sides are
rounded outward.

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
12
If all goes well, the Banana Pi will boot in a few minutes. The screen will display the
OS GUI.
Step5: Shut down your Banana Pi
You can use the GUI to shut down the Banana Pi safely.
Also you can run the command in the terminal:
sudo halt
or

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
13
sudo shutdown –h.
This will shut down the PI safely, (just use the power key to turn off might
damage the SD-cards file system). After that you can press the power key for 5
seconds to turn it off.
If all is well ,the splash screen show as below
Android system screen
Ubuntu system screen

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
14
Debian system screen
Raspberry Pi

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
15
GPIO define

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
16
Banana Pi V1.4 PIN define
PIN PIN define GPIO
CON1-P01 LINEINL
CON1-P02 LINEINR
CON1-P37 HPL
CON1-P36 HPR
CON1-P07 FMINL
CON1-P09 FMINR
CON1-P04 ADC_X1
CON1-P06 ADC_X2

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
17
CON1-P08 ADC_Y1
CON1-P10 ADC_Y2
CON1-P13 LRADC0
CON1-P15 LRADC1
CON1-P33 RESET#
CON1-P17 CSI-D0 PE4
CON1-P19 CSI-D1 PE5
CON1-P21 CSI-D2 PE6
CON1-P23 CSI-D3 PE7
CON1-P25 CSI-D4 PE8
CON1-P27 CSI-D5 PE9
CON1-P29 CSI-D6 PE10
CON1-P31 CSI-D7 PE11
CON1-P20 CSI-PCLK PE0
CON1-P24 CSI-MCLK PE1
CON1-P28 CSI-VSYNC PE3
CON1-P30 CSI-HSYNC PE2
CON1-P18 CSI0-STBY-EN PH19
CON1-P26 CSI0-RESET# PH14
CON1-P32 CSI1-STBY-EN PH18
CON1-P34 CSI1-RESET# PH13
CON1-P14 TWI1-SDA PB19
CON1-P16 TWI1-SCK PB18
CON1-P12 CSI-FLASH PH17
CON1-P22 CSI0-PWR-EN PH16
CON1-P35 CSI-IO0 PH11
CON1-P38 IPSOUT
CON1-P40 IPSOUT
CON1-P05 GND
CON1-P11 GND
CON1-P39 GND
CON1-P03 VCC-CSI
CON2-P09 LCD0-D00 PD0
CON2-P11 LCD0-D01 PD1
CON2-P13 LCD0-D02 PD2
CON2-P15 LCD0-D03 PD3
CON2-P17 LCD0-D04 PD4

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
18
CON2-P19 LCD0-D05 PD5
CON2-P21 LCD0-D06 PD6
CON2-P23 LCD0-D07 PD7
CON2-P25 LCD0-D08 PD8
CON2-P27 LCD0-D09 PD9
CON2-P29 LCD0-D10 PD10
CON2-P31 LCD0-D11 PD11
CON2-P33 LCD0-D12 PD12
CON2-P35 LCD0-D13 PD13
CON2-P37 LCD0-D14 PD14
CON2-P39 LCD0-D15 PD15
CON2-P40 LCD0-D16 PD16
CON2-P38 LCD0-D17 PD17
CON2-P36 LCD0-D18 PD18
CON2-P34 LCD0-D19 PD19
CON2-P32 LCD0-D20 PD20
CON2-P30 LCD0-D21 PD21
CON2-P28 LCD0-D22 PD22
CON2-P26 LCD0-D23 PD23
CON2-P22 LCD0-CLK PD24
CON2-P20 LCD0-CS PH6
CON2-P18 LCD0-HSYNC PD26
CON2-P16 LCD0-VSYNC PD27
CON2-P14 LCD0-DE PD25
CON2-P12 LCD0-IO2 PH9
CON2-P10 PWM0 PB2
CON2-P08 LCD0-IO1 PH8
CON2-P06 LCD0-IO0 PH7
CON2-P04 TWI3-SCK PI0
CON2-P02 TWI3-SDA PI1
CON2-P07 LCDIO-03 PH12
CON2-P01 IPSOUT
CON2-P03 IPSOUT
CON2-P05 GND
CON2-P24 GND
CON3-P18 CAN_RX PH21
CON3-P16 CAN_TX PH20

Banana PI User Manual
www.sinovoip.com.cn www.banana-pi.com
19
CON3-P23 SPI0_CLK PI11
CON3-P21 SPI0_MISO PI13
CON3-P19 SPI0_MOSI PI12
CON3-P24 SPI0_CS0 PI10
CON3-P26 SPI0_CS1 PI14
CON3-P05 TWI2-SCK PB20
CON3-P03 TWI2-SDA PB21
CON3-P15 UART2_CTS PI17
CON3-P22 UART2_RTS PI16
CON3-P11 UART2_RX PI19
CON3-P13 UART2_TX PI18
CON3-P10 UART3_RX PH1
CON3-P08 UART3_TX PH0
CON3-P12 PH2 PH2
CON3-P07 PWM1 PI3
CON3-P01 VCC-3V3
CON3-P17 VCC-3V3
CON3-P02 VCC-5V
CON3-P04 VCC-5V
CON3-P09 GND
CON3-P25 GND
CON3-P06 GND
CON3-P14 GND
CON3-P20 GND
J12-P03 PH5 PH5
J12-P05 PH3 PH3
J12-P04 UART7_RX PI21
J12-P06 UART7_TX PI20
J12-P01 VCC-5V
J12-P02 VCC-3V3
J12-P07 GND
J12-P08 GND
J11-P01 UART0-TX PB22
J11-P02 UART0-RX PB23