SJÖBLOMS 080-3900 User manual

Ver 200318
USER MANUAL
IV STAND HEAVY-DUTY MODELS
For models:
080-3900, 080-3910, 080-3920, 080-3930
NOTE!
The operator must read the user manual
carefully BEFORE the product is used,
to avoid unnecessary risks to the patient and operator.

IV stand heavy-duty models Table of contents
SJÖBLOMS [phone] [email protected]
TABLE OF CONTENTS
Foreword
Warranty
Important information
1. Functional description
1.1 General description
2. Operation
2.1 Assembly
2.2 Max load
3. Maintenance & Cleaning
3.1 Routine examinations
3.2 Cleaning
4. Technical specification
4.1 Dimensions
4.2 Labels
5. EU-Declaration of Conformity
6. Contact details

IV stand heavy-duty models Foreword, warranty, important info
SJÖBLOMS [phone] [email protected]
FOREWORD
Welcome as the owner of a product manufactured by Sjöbloms Sjukvårdsutrustning
AB. We hope that you will be pleased and satisfied with our quality product.
If a problem should arise with this or any of our products, you are always welcome
to contact us, and our service department will assist you with the expertise needed
to solve the problem.
The user manual contains all the information needed to use, maintain and service
the product. The document is continuously updated as the products are modified.
Therefore we reserve against possible changes in the user manual.
WARRANTY
Sjöbloms provides a two-year warranty for material, design and manufacturing
defects, provided the products are not subjected to tampering or excessive wear.
For the guarantee to apply, the product must have been used in accordance with
the user manual, and the maintenance performed as specified.
IMPORTANT INFORMATION
This product is intended for professional medical use. The user manual should be
read carefully before using the product, to avoid unnecessary risks for the patient
and operator.
The user manual contains warnings where there is a risk of personal injury, which
should be noted. Improper handling can be fatal.
A warning triangle is shown where particularly important information can be found.
Warning triangle

IV stand heavy-duty models Max load
SJÖBLOMS [phone] [email protected]
1. FUNCTIONAL DESCRIPTION
This product is meant for professional use in health care, for examination of the
patient.
It is designed to be a functional and user-friendly tool for the operator and patient.
General description
IV stand heavy-duty model, all-welded steel tubes, powder-coated steel foot, 75
mm castors, 2 with brake.
Available with or without handle, the stand has 4 hooks and a 5-legged foot. The
handle is removable.

IV stand heavy-duty models EU Declaration of conformity
SJÖBLOMS [phone] [email protected]
2. OPERATION
2.1 Assembly
If the stand is delivered with the hooks non-mounted, un-screw the screw as
shown. Remove the hooks from under the foot where it is placed during
transportation. Mount the hooks on the tube, tighten well. Handle and pump
holders (both optional) is mounted from below before the foot is mounted.
The bolt is mounted at arrival. First un-screw this.
Place the tube onto the foot. Screw on the bolt from beneath.
Tighten the Allen screw.
Tighten handles.

IV stand heavy-duty models Max load
SJÖBLOMS [phone] [email protected]
2.2 Max load
Max load:
Pumps: Max 25 kg, evenly distributed.
Bags: The top and its 4 hooks may be
loaded with max 10 kg evenly
distributed. Max 4 kg on a single hook.

IV stand heavy-duty models EU Declaration of conformity
SJÖBLOMS [phone] [email protected]
3. MAINTENANCE AND CLEANING
3.1 Routine controls
Routine controls is recommended every 6 months, lubricate if needed.
Important!
Failure to perform the following routine can cause the patient and/or operator to
be exposed to unnecessary risks and the couch may have a reduced life expectancy.
Please check all functions and parts on a regular basis.
Check the following:
Any unusual sounds.
Castors and castor locking mechanism.
3.2 Cleaning
Disinfection
If the product needs to be disinfected, use a diluted alcohol solution. Too strong an
alcohol solution can have a drying effect and the imitation leather may deteriorate
and crack.
Chlorine
Chlorine-base solutions are not recommended as a general rule, since it effects
products and environment negatively, differently depending on concentration. If
chlorine-based solutions are used, always wipe afterwards with damp cloth.

IV stand heavy-duty models Dimensions and labels
SJÖBLOMS [phone] [email protected]
4. TECHNICAL SPECIFICATIONS
4.1 Dimensions
Minimal height: 145 cm
Max height: 240 cm
Weight: Ca 15 kg

IV stand heavy-duty models Dimensions and labels
SJÖBLOMS [phone] [email protected]
4.2 Labels
CE label contains date, order
number, serial number and our
contact info.

IV stand heavy-duty models EU Declaration of conformity
SJÖBLOMS [phone] [email protected]
5. EU-DECLARATION OF CONFORMITY
EU-DECLARATION OF CONFORMITY
according to MDD 2007/42/EC including Appendix
and according to CE-marking Directive 93/68/EEC
Type of equipment: IV stands heavy duty
Manufacturer: Sjöbloms Medical Equipment AB
Models
Art no: 080-3930 Product registration number: 144263
Art no: 080-3920 Product registration number: 144264
Art no: 080-3910 Product registration number: 144265
Art no: 080-3900 Product registration number: 144266
Manufacturer
Sjöbloms Sjukvårdsutrustning AB
Myrängsvägen 8
S-891 50 ÖRNSKÖLDSVIK, SWEDEN
Sjöbloms Sjukvårdsutrustning AB ensures that the above products are in
accordance with the EU Council MDD 93/42/EEC, as well as the Swedish legislation
in force (1993:584) on medical devices and the regulations issued by Medical
Products Agency (LVFS 2003:11).
Örnsköldsvik 2016-08-10
Karl-Gunnar Sjöblom

IV stand heavy-duty models Contact info
SJÖBLOMS [phone] [email protected]
6. CONTACT INFORMATION
Sjöbloms sjukvårdsutrustning AB
Myrängsvägen 8
891 50 Örnsköldsvik
Sweden
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
Web: www.sjobloms.com