skram furniture Tigris Bed User manual

skramfurniture.compage: 1
Please follow the steps outlined below to ensure the safe and proper set-up of this product:
Use care during assembly to avoid damage. Two people are required to complete assembly.
Tools required: rubber mallet
1. After unpacking parts, carefully place headboard upright in desired location.
Do not leave unattended.
2. Engage left rail into headboard and push down or lightly tap with ruber mallet+cork block.
3. Engage right rail to headboard in similar manner.
4. Position footboard within reach of rail ends
5. With 2 people working in sync, gently tilt rail ends upwards to engage with hardware on
footboard. Push down firmly when connection has been made.
6. Use high density cork block (supplied) and rubber mallet to seat rails fully. Aluminum rail
supports are aligned when rails are fully seated.
7. Carefully place right platform by first engaging it with headboard metal rail and then carefully
lower it along edge of left rail until it seats against footboard metal rail.
8. Attach 5th leg support to right platform with (QTY. 3) low profile flange socket bolts
(provided). Engage leveler foot as needed to ensure a level platform.
9. Repeat step 7 for right platform.
-Further information regarding the cleaning, care and use of these products may be found by referring to
the ‘care and use instructions’.
-Please direct questions regarding the product or installation to Skram.
Thank you for your purchase.
Assembly Instructions: Tigris Bed:

skramfurniture.compage: 2
5TH leg
platform
footboard
right rail
left rail
headboard
Assembly Instructions: Tigris Bed: