SmarTracks Timing Mobile Set User manual

SmarTracks Timing Mobile Set –Quick Start Guide Digital v001 (February 2022)
Timing Mobile Set
Quick Start Guide
GETTING STARTED
1. Charge the sensor with a regular USB adapter (5V)
2. Download the Smart Run app and register your account using a valid e-mail address
3. To register your Timing Gates, use the app to scan the QR code on the yellow Timing Gate case
4. Link up your sensor with the app.
After this first linking, the app always automatically reconnects to the sensor.
MEASURE A RUN
1. Make sure the sensor is charged and connected
to the app
2. Place the Timing Gates on the desired positions
3. In the app, select “Mobile Gates” and choose
your planned exercise
4. Put on the TB40 Belt with sensor
5. Position yourself 1m before the first Timing
Gate
6. Start the run. The timing starts once you pass
the first Timing Gate
7. After passing the final Timing Gate, stand still
for one second
8. Press stop
Install the Smart Run by Humotion app:

SmarTracks Timing Mobile Set –Quick Start Guide Digital v001 (February 2022)
WHAT IS IN YOUR TIMING MOBILE SET?
Timing Gates (MCDs + Cones)
The Timing Gates create a magnetic field which allows timing by the
sensor. To be able to use the Timing Gates with the Smart Run app,
scan the QR code on the yellow metal case on first time use.
Keep enough space between the MCDs and any electronical device,
including the sensor.
To insert the MCD, place the
cone on the ground and push
the MCD into the cone. To
remove the MCD, you can
place your foot on the cone to stabilize it and then pull out the MCD.
DX5.0 Timing Sensor
The sensor measures movement data and
connects to the Smart Run app. It can be
charged with a regular USB adapter (5V). Fully
charged, a sensor can measure ca. 8-10 hours,
dependent on activities.
Charging time 100% : ca. 3 hours
80% : ca. 2 hours
TB40 Belt
The belt keeps the sensor in the right place to
ensure correct data. Make sure the sensor is
placed in the middle on your lower back. The
sensor cap should point left and the T-number
should face outward.
Angled MCDs are
recommended for
shorter persons and for
certain agility test setups

SmarTracks Timing Mobile Set –Quick Start Guide Digital v001 (February 2022)
PLACING THE TIMING GATES
Make sure that you keep a distance of min 5m between the
Gates and max 1.2m distance between each Gate component.
Start the run 1m before the first Timing Gate.
.
ANY QUESTIONS LEFT?
For instruction videos, go to www.smartracks.run/instruction-videos
If you have any questions, please contact our support team, they are happy to help!
Phone [phone]
E-mail [e-mail]
www.smartracks.run
Humotion GmbH
Heerdestraße 23
48149 Münster
Germany