SolidView LVW11-46T User manual

Low Cost Video Wall Mount
Maintenance
• Check that the bracket is secure and safe to use at regular intervals(at least every three months).
• Please contact your distributor if you have any questions.
10. Finish the Installation
Note: Install/adjust
the displays by the
numerical order
given.
4
1
3
2
INSTALLATION MANUAL
LVW11-46T
LVW11-48T
200x200/300x200/300x300
400x200/400x300/400x400
600x400
rated
50kg/110lbs
70"
MAX
rated
50kg/110lbs
70"
MAX
200x200/200x300/200x400
300x200/300x300/300x400
400x200/400x300/400x400
600x400/800x400
1mm
Note: Reserve some
space to avoid screen
collision.
1mm
SOLIDEZ, DESEMPEÑO Y CALIDAD AV

Required for Installation
Component Checklist
Package M
Package W
ST6.3x55 (x6)
W-A
concrete anchor (x6)
W-B
D6 washer (x5)
W-C
12
display mount (x1)
A
mounting bar (x2)
B
mounting bar (x2)
C
connecting plate (x1)
D
bracket (x2)
F
connecting plate (x1)
E
M6x10
G
(x8) M6x25
H
(x4) M6
I
(x4) 5mm Allen Key
J
(x1) M6-M8
K
(x1)
•Use with products heavier than the rated weights indicated may result in instability causing
possible injury.
• Please closely follow the assembly instructions. Improper installation may result in damage
or serious personal injury.
• Safety gear and proper tools must be used. This product should only be installed by
professionals.
• This product is designed to be installed on solid concrete walls or masonry walls.
• Make sure that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
• Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
• This product contains small items that could be a choking hazard if swallowed. Keep these
items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead to
product failure and personal injury.
CAUTION
have any questions regarding any of the instructions or warnings, please contact your
local distributor for assistance.
Read the entire instruction manual before you start installation and assembly. If you
washers (x4)
M-F
small spacers (x8)
M-G
big spacers (x8)
M-H
M8x50
M-E
(x4)
M5x14
M-A
(x4) M6x14
M-B
(x4) M6x30
M-C
(x4) M8x30
M-D
(x4)

2
W-A
W-B
6mm
1
Insert the screw but
reserve some distance.
4
3
1. Assembling the Wall Mount
3. For Solid Brick and Concrete Wall Mounting
60mm
(2.4")
60mm
(2.4")
ø 10mm
(ø 3/8")
1:1
2. Attach the Connecting Plate
1:1
Align the connecting holes
and tighten the screws to fix.
WARNING
Installers must verify that the supporting surface will safely support the combined weight of the equipment
and all attached hardware and components.
W-A W-B
W-C
1:1
K
I
H
GG
J
A
B
C
Drill pilot holes
2
Mark the
exact location of
mounting holes
1
√X X
Screw the wall
plate onto
the wall
W-B
W-C
W-A
D
E

6
5
X=Length of display
Y=Height of display
6. For Flat or Irregular Back Screens
M-A M-B
1:1
M-C M-D
M-E M-F
M-G M-H
4. Install Other Mounts
Attach the mounts to the wall by specified distance.
M-H
M-C M-D/
M-F
M-C/M-D
M-F
M-G
M-H
M-G
M-C/M-D
M-F
M-H
M-F
M-E
M-F
M-E
M-H
M-G
M-F
M-E
M-H
M-G
5. Pop-Out Extension
Warning: Do not pull out the bracket
directly without a press before.
When the bracket is in locking, ensures that
press the bracket to unlock it then pull it out.
X
Y+2
F
M-B
M-F
M-A
M-F

7. Hooking the Display onto the Wall Plate
8. Adjustment
Push the display to left or right
to enable fast alignment.
1:1
Turn the locking plate downward to install the
padlock.
Use a padlock to prevent the
display from being stolen
(The padlock is not included).
8
7
上下��
前后��，角度��
上下��
Height and Level Adjustment
2
3
4
1
Height Adjustment
Depth Adjustment
上下��
Height Adjustment
Depth Adjustment

21 43
9. Micro Adjustment
Depth and Tilt Adjustment
1
10
9
1
34 12
21 43
21 43
2
3
4
21 43
Swivel Adjustment
2
34
12
1 2
3 4