
Using your Remote Control:
Numeric Buttons: Selects the track
number directly or in Program mode.
TIME:Toggles lapsed and remaining
time on disc.
Fast Forward
Fast Rewind
Next Track (skip)
Previous Track
Play
STOP
Pause
Standby: Puts CD Player into
standby mode.
SCAN: Plays the first 10
seconds of each track
automatically.
DISC: Opens and Closes the
CD drawer.
Prog (Program): you can
program the playback
sequence for up to 30 tracks
of your CD. First press the
PROG key then select the
desired track using the PREV
or NEXT button and then store
it pressing the PROG key.
You can use numeric buttons
to enter the track number
also.
To play your programmed
sequence press PLAY.
Pressing PLAY again will
restart the playback
sequence. To CLEAR the
programmed sequence press
STOP twice in Play mode or
once in Stop.
A+B: You can repeat any
sections of a track. Press
ONCE to select the start of the
section and press a+b AGAIN
to end the section. Press
STOP, PREV or NEXT to
cancel.
Repeat: repeat a track or disc
or a programmed playback
sequence. Press twice to
repeat a track
Shuffle: Plays the CD in
random orde
Note:
If the remote fails to operate the CD
player please check the conditions of
the batteries and also that the emote
sensor has not been obstructed