9
DSOURCE button
To power on; change the source (Radio/CD/
USB/AUX)*.
EDisplay window
FUSB terminal page 13
To connect to the USB device.
GOPEN button page 6, 7
H(BACK) button page 10
To return to the previous display.
IReceptor for the card remote
commander
JSEEK –/+ buttons
CD/USB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
KMODE button page 12, 14
To select the radio band (FM/AM)*; select
the play mode of ATRAC Audio Device.
LSCRL (scroll) button
To scroll the display item.
MFrequency select switch (located on the
bottom of the unit)
See “Frequency select switch” in the
supplied installation/connections manual.
NNumber buttons
CD/USB:
(1): REP page 12, 14
(2): SHUF page 12, 14
(3)/(4): ALBUM –/+
To skip albums (press); skip albums
continuously (press and hold).
(5): DM+ page 4
To activate the DM+ function, set
“DM+ on.” To cancel, set “DM+ off.”
(6): PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
ODSPL (display) button page 12
To change display items.
PAUX input jack page 17
To connect a portable audio device.
QRESET button page 5
RZ (eject) button page 7
To eject the disc.
SDisc slot page 7
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 5).
w; MENU button
To enter menu.
wa ENTER button
To apply a setting.
ws <(.)/,(>) buttons
To control CD/radio/USB, the same as
(SEEK) –/+ on the unit.
Setup, sound setting, etc., can be operated by
<,.
wd VOL (volume) +/– button
To adjust volume.
wf ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wg SOUND button
To enter sound setting.
wh LIST button
To list up (Radio); enter the Quick-BrowZer
mode (CD/USB).
wj M(+)/m(–) buttons
To control CD/USB, the same as (3)/(4)
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
Mm.
*In the case of a CD/MD changer being connected;
when (SOURCE) is pressed, the connected device
(“MD”) will appear in the display, depending on
which device is connected. Furthermore, if (MODE)
is pressed, you can switch the changer.
Notes
•When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
•If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless (SOURCE) on the unit is
pressed, or a disc is inserted to activate the unit first.
