manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Sony
  6. •
  7. FM/AM Compact Disc Player
  8. •
  9. Sony CDX-L460X Product guide

Sony CDX-L460X Product guide

Other manuals for CDX-L460X

1

This manual suits for next models

1

Other Sony FM/AM Compact Disc Player manuals

Sony CDX-GT770 User manual

Sony

Sony CDX-GT770 User manual

Sony CDX-GT707UI User manual

Sony

Sony CDX-GT707UI User manual

Sony CDX-GT590UI User manual

Sony

Sony CDX-GT590UI User manual

Sony CDX-G3070UV User manual

Sony

Sony CDX-G3070UV User manual

Sony CDX-G2080IM User manual

Sony

Sony CDX-G2080IM User manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

Parts Iist (1)
The numbers in the list are keyed to those in the
instructions.
Caution
Handle the bracket 1carefully to avoid injuring
your fingers.
Cautions
•This unit is designed for negative earth 12 V
DC operation only.
•Do not get the wires under a screw, or caught
in moving parts (e.g. seat railing).
•Before making connections, turn the car
ignition off to avoid short circuits.
•Connect the yellow and red power input leads
only after all other leads have been connected.
•Run all earth wires to a common earth
point.
•Be sure to insulate any loose unconnected
wires with electrical tape for safety.
Notes on the power supply cord (yellow)
•When connecting this unit in combination with
other stereo components, the connected car
circuit’s rating must be higher than the sum of
each component’s fuse.
•When no car circuits are rated high enough,
connect the unit directly to the battery.
Connection example (2)
Notes (2-B)
• Be sure to connect the earth cord before
connecting the amplifier.
• If you connect an optional power amplifier and do
not use the built-in amplifier, the beep sound will
be deactivated.
Connection diagram (3)
1To a metal surface of the car
First connect the black earth lead, then connect
the yellow and red power input leads.
2To the power aerial control lead or power
supply lead of aerial booster amplifier
Notes
• It is not necessary to connect this lead if there
is no power aerial or aerial booster, or with a
manually-operated telescopic aerial.
• When your car has a built-in FM/AM aerial in
the rear/side glass, see “Notes on the control
and power supply leads.”
3To AMP REMOTE IN of an optional power
amplifier
This connection is only for amplifiers. Connecting
any other system may damage the unit.
4To the +12 V power terminal which is energised
in the accessory position of the ignition key
switch
Notes
• If there is no accessory position, connect to the
+12 V power (battery) terminal which is
energised at all times.
Be sure to connect the black earth to it first.
• When your car has a built-in FM/AM aerial in
the rear/side glass, see “Notes on the control
and power supply leads.”
5To the +12 V power terminal which is energised
at all times
Be sure to connect the black earth to it first.
3-237-524-12 (2)
Installation/Connections
安裝線路連接
Sony Corporation © 2002 Printed in Korea
CDX-L460X
CDX-L440B
2
B
A
AUDIO OUT
TOP
1
FM/AM
Compact Disc
Player
112
TOP
×4
345
67
×2
8
Equipment used in illustrations (not supplied)
插圖中的裝置(非附送)
Front speaker
前揚聲器
Rear speaker
後揚聲器
Power amplifier
功率放大器
AUDIO OUT
REAR
L
R
3
from car aerial
來自汽車天線
1
4
5
2
AMP REM
ANT REM
RCA pin cord (not supplied)
RCA 針型插頭電線(非附送)
Max. supply current 0.3 A
最大供電量 0.3 A
Max. supply current 0.1 A
最大供電量 0.1 A
Fuse (10 A)
保險絲(10 A)
Red
紅色
Yellow
黃色
Black
黑色
Blue
藍色
Blue/white striped
藍白條紋
White
白色
Green
緣色
Purple
紫色
White/black striped
白黑條紋
Grey/black striped
灰黑條紋
Green/black striped
緣黑條紋
Purple/black striped
紫黑條紋
AUDIO OUT
Grey
灰色
零件一覽表(1)
圖示數字與說明書中的數字是一致的。
注意
移動裝卸支架 1 時,請特別注意別傷到手指。
注意
•本機只能使用負極接地 12 V 直流電源。
•不要使導線夾在螺栓下,或繞掛在移動部件上
(如:座椅扶手上)。
•進行連接之前,請先關閉汽車的點火器,以避免
短路。
•黃色和紅色電源輸入導線必須在所有其它導線都
連接完畢以後才連接。
•將所有地線都連接到同一接地點。
•為了安全,請確認把沒有連接的導線用電器膠帶
包紮進行絕緣。
電源導線須知(黃色)
•將本機與其它立體聲裝置相連接時,所連接的
汽車電路容量必須大於每個裝置保險絲容量的
總和。
•當汽車電路容量不夠大時,請將本機直接與電
池相連接。
線路連接圖例(2)
註
(2-B)
•
務必在接放大器之前連接地線
。
•
如果您連接了選購件的功率放大器而不使用內裝的放
大器,將無嘟聲功能
。
線路連接圖(3)
1至汽車的金屬部位
首先連接黑色接地導線,然後再連接黃色和紅色電源
輸入導線。
2至電動天線控制導線或天線升壓放大器的電源導線
註
•
如無電動天線,增壓器,或用手操作的套管式天
線,便不須連接此導線。
•
您的汽車的後側玻璃窗中如果內裝有 FM/AM 天
線,即請參看“控制和電源線須知”。
3至選購的功率放大器的 AMP REMOTE IN(放大器遙控
輸入)
本連接僅用於放大器。連接任何其它系統可能會損壞
本機。
4至在點火鑰匙的輔助位置上通電的 +12 V 電源端子
註
•
若沒有輔助位置,則請連接至常時通電的 +12 V
電源(電池)端子。
務請首先將黑色接地導線與其連接。
•
您的汽車的後側玻璃窗中如果內裝有 FM/AM 天
線,即請參看“控制和電源線須知”。
5至隨時都通電的 +12 V 電源端子
務請首先將黑色接地導線與其連接。
3
Left
左
Right
右
Left
左
Right
右
TOP
Notes on the control and power supply leads
• The power aerial control lead (blue) supplies +12 V
DC when you turn on the tuner.
• When your car has built-in FM/AM aerial in the
rear/side glass, connect the power aerial control
lead (blue) or the accessory power input lead (red)
to the power terminal of the existing aerial
booster. For details, consult your dealer.
• A power aerial without relay box cannot be used
with this unit.
Memory hold connection
When the yellow power input lead is connected,
power will always be supplied to the memory circuit
even when the ignition key is turned off.
Notes on speaker connection
• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 to 8 ohms,
and with adequate power handling capacities to
avoid its damage.
• Do not connect the speaker terminals to the car
chassis, or connect the terminals of the right
speakers with those of the left speaker.
• Do not connect the ground lead of this unit to the
negative (-) terminal of the speaker.
• Do not attempt to connect the speakers in parallel.
• Connect only passive speakers. Connecting active
speakers (with built-in amplifiers) to the speaker
terminals may damage the unit.
控制和電源線須知
•
接通調諧器電源時,電動天線的控制導線(藍色)便
能提供 +12 V 直流電。
•
若您的汽車後側玻璃窗上有內置 FM/AM 天線,須將
電動天線控制導線(藍色)或輔助電源輸入導線(紅
色)連接到現有天線放大器上的電源端子上。詳細內
容請向銷售商諮詢。
•
本機不能使用不具備繼電箱的電動天線。
保持記憶的線路連接法
當連接好黃色電源輸入導線時,即使汽車發動機點火鑰匙
被轉在電源切斷之處,電源仍繼續將電流供給記憶用電路,
以保持所記憶著的數據。
連接揚聲器時的注意事項
•
連接揚聲器電線以前,請先切斷本機電源。
•
使用阻抗為 4-8Ω 且具有充分功率處理容量的揚聲
器,以免損壞揚聲器。
•
不要將揚聲器端子連接到汽車底盤上或將右揚聲器端
子與左揚聲器端子相連接。
•
切勿將本機的接地導線連接至揚聲器的負(-)接線柱。
•
揚聲器不可平行連接。
•
請僅連接無源揚聲器。若將有源揚聲器(帶內置放大
器)連接到揚聲器端子上會損壞本機。
1
7
TOP
1 2 3
4
4
5
54
4
182 mm
53 mm
TOP
1
Bend these claws outward
for a tight fit, if necessary.
若有必要,則可彎曲這些卡爪。
4
5
6
1
2
5
Fire wall
防火壁
Dashboard
儀表板
Ribs
凸出部
with the ribs on bottom
帶凸出部的地方朝下
1
3
5A
to dashboard/center console
至儀表板中央控制箱
Bracket
托架
Bracket
托架
max. size
5 ×8 mm
最大尺寸
5×8 mm
B
max. size
5 ×8 mm
最大尺寸
5×8 mm
TOYOTA NISSAN
to dashboard/center console
至儀表板中央控制箱
Bracket
托架
Bracket
托架
max. size
5 ×8 mm
最大尺寸
5×8 mm
max. size
5 ×8 mm
最大尺寸
5×8 mm
Existing parts supplied with your car
隨汽車附送的部件
Existing parts supplied with your car
隨汽車附送的部件
with the TOP marking up
要使帶 TOP 標記面朝上
2
4
4
4
4
使用前注意事項
•本機請放在不妨礙司機駕駛之處。
•避免將本機放在高溫之處,如陽光直接照射、暖
氣機前、或灰塵極多、髒亂,以及極易受震動等
地方。
•為了安全起見,安裝時請使用附送的部件。
安裝角度之調整
請在 60 度以內調整安裝角度。
頻率選擇開關
AM(FM)調諧間隔在出廠前被設定在 9 k
(50 k)位置上。若貴國的頻率分配系統是以
10 kHz(200 kHz)間隔為基礎的,連接前,請將
本機底部上的開關設定在 10 k(200 k)位置
上。
安裝示例(4)
安裝在儀錶板裡
將本機安裝於日本產汽車上時
(5)
有的日本產汽車不能安裝本機,在這種情形下,請
您向當地的 Sony 經銷商諮詢。
註
為防止發生故障,安裝時只能使用附送的螺絲
4
。
安裝在點火鑰匙開關上沒有 ACC
(輔助)位置的汽車上時的警告
在關掉汽車引擎之後,一定請按下機器上的
(OFF) 兩秒以關掉時鐘顯示。
如果只短暫地按一下 (OFF),將不會關掉時鐘顯
示而浪費電池。
復位按鈕
當安裝和連接完成後,務請用圓珠筆等按壓復位按
鈕。
Precautions
•Choose the installation location carefully so
that the unit will not interfere with normal
driving operations.
•Avoid installing the unit in areas subject to
dust, dirt, excessive vibration, or high
temperatures, such as in direct sunlight or near
heater ducts.
•Use only the supplied mounting hardware for
a safe and secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 60°.
Frequency select switch
The AM (FM) tuning interval is factory-set to the
9 k (50 k) position. If the frequency allocation
system of your country is based on 10 kHz
(200 kHz) interval, set the switch on the bottom
of the unit to the 10 k (200 k) position before
making connections.
Mounting example (4)
Installation in the dashboard
Mounting the unit in a Japanese
car (5)
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult
your Sony dealer.
Note
To prevent malfunction, install only with the
supplied screws 4.
Warning when installing in a car
without ACC (accessory)
position on the ignition key
switch
Be sure to press (OFF) on the unit for two
seconds to turn off the clock display after
turning off the engine.
When you press (OFF) only momentarily, the
clock display does not turn off and this causes
battery wear.
RESET button
When the installation and connections are
completed, be sure to press the reset button with
a ballpoint pen, etc.