Southern MS555200TX User manual

For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]om
www.seidal.com
MS555200TX
Porter Gaming/Media Console
Espresso Finish
Assembly Instructions
PO#:

Porter Gaming/Media Console
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on
clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer
service if hardware is missing. Before beginning assembly, carefully study the diagrams below and
sort your hardware according to the pictures. Using the incorrect hardware will cause damage.
A
Quantity
of 2
Drawer Front Panel
B
Quantity
of 2
Drawer Left Side Panel
C
Quantity
of 2
Drawer Right Side Panel
D
Quantity
of 2
Drawer Bottom P
anel
E
Quantity
of 2
Drawer Back P
anel
F
Quantity
of 1
Lower Drawer Bottom
P
anel
G
Quantity
of 1
Lower Drawer Back P
anel
H
Quantity
of 1
Lower Drawer Left Side P
anel
I
Quantity
of 1
Lower Drawer Right Side
P
anel
J
Quantity
of 1
Bottom P
anel
K
Quantity
of 1
Left
Middle P
anel
L
Quantity
of 1
Right
Middle P
anel
M
Quantity
of 3
Middle Fixed Shelf
N
Quantity
of 1
Left
Fixed Shelf
O
Quantity
of 1
Right
Fixed Shelf

P
Quantity
of 1
Left Side panel
Q
Quantity
of 1
Right Side panel
R
Quantity
of 1
Support Leg
S
Quantity
of 1
Top Panel
T
Quantity
of 1
Left Door
U
Quantity
of 1
Right Door
V
Quantity
of 2
Side Back Panel
W
Quantity
of 1
Upper Middle Back Panel
X
Quantity
of 1
Lower Middle Back Panel
Y
Quantity
of 1
Left Adjustable Shelf
Z
Quantity
of 1
Right Adjustable Shelf
1
Quantity
of 20
Cam Bolt
∮
9/32”x1-1/2”L
2
Quantity
of 20
Cam Lock
∮
5/16”x1/2”L
3
Quantity
of 28
Wood Dowel
∮
5/16” x1-1/4”L
4
Quantity
of 4
Long Wood Dowel
∮
5/16”x2”L
5
Quant
ity
of 6
Small Wood Dowel
∮
1/4”x1-1/4”L
6
Quantity
of 16
Bolt
∮
1/4’’x1”L
7
Quantity
of 2
Metal Knob

8
Quantity
of 2
Bolt
∮
5/32’’x3/4’’L
9
Quantity
of 2
Magnet
10
Quantity
Of 41
Screw
∮
1/8’’x1/2’’L
11
Quantity
of 4
Handle
12
Quantity
of 8
Bolt
∮
5/32’’x1/2’’L
13
Quantity
of 8
Shelf Pin
14
Quantity
of 20
Screw
∮
5/32”x 1”L
15
Quantity
of 4
Bracket
16
Quantity
of 4
Screw
∮
1/8”x5/8”L
17
Quant
ity
of 4
Plastic Anchor
18
Quantity
of 4
Screw
∮
5/32”x 1-1/2”L
19
Quantity
of 2
Plastic Strap
20
Quantity
of 1
Allen Wrench
21
Q
uantity
of 4
Metal Nut
22
Quantity
of 4
Bolt
∮
1/4”x 1-1/2”L
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.
Assembly Tool Required No.2 Phillips
Screwdriver (Not Included)

Please do not over tighten cam bolts.
Please stop when you feel tight"
Figure 1
Insert cam locks (2) into holes on
middle fixed shelves (M).
Screw cam bolts (1) into holes on left
middle panel (K) and right middle
panel (L).
Attach middle fixed shelf (M) to left
middle panel (K) and right middle
panel (L) by inserting cam bolts (1),
wood dowels (3), and wood dowels (4)
into corresponding holes until fixed
shelf (M), left middle panel (K) and
right middle panel (L) meet.
Tighten by rotating cam locks (2)
clockwise with Phillips screwdriver.
Figure 2
Attach bottom panel (J) to assembled
unit by inserting wood dowels (3) into
corresponding holes until assembled
unit and bottom panel (J) meet.
Use screws (6) to connect bottom
panel (J) to assembled unit.
Tighten by rotating bolts (6) clockwise
withAllen wrench (20).
Attach support leg (R) to assembled
unit by hand.
Porter Gaming/Media Console
Assembly Instructions
( 2 )
(1)
1
2
3
K
M
L
3
2
2
22
2
4
R
3
20
J
K
L
6
6
6
3

Figure 3
Attach magnets (9) to predrilled holes
on fixed shelves (N) and (O) with
screws (10), then fasten them.
Insert cam locks (2) into left fixed shelf
(N) and right fixed shelf (O).
Screw cam bolts (1) into holes on
assembled.
Attach left fixed shelf (N) and right
fixed shelf (O) to assembled unit by
inserting cam bolts (1) into
corresponding holes until fixed shelf
(N), right fixed shelf (O), and
assembled unit meet.
Tighten by rotating cam locks (2)
clockwise with Phillips screwdriver.
Figure 4
Insert cam locks (2) into holes on
assembled unit.
Screw cam bolts (1) into holes on left
side panel (P) and right side panel (Q).
Attach left side panel (P) and right side
panel (Q) to assembled unit by
inserting cam bolts (1) and wood
dowels (3) into corresponding holes
until left side panel (P), right side panel
(Q), and assembled unit meet.
Use screws (6) to connect bottom
panel to side panels (P) and (Q).
Tighten by rotating cam locks (2) and
bolts (6) clockwise with Phillips
screwdriver and Allen wrench (20).
N
O
N
O
2
1
32
3
3
3
3
6
2

Figure 5
Insert wood dowels (3) into holes on
assembled unit as shown.
Attach top panel (S) to assembled unit
with bolts (6).
Tighten by rotating bolts (6) clockwise
with Allen wrench (20).
Insert the shelf pins (13) into desired
holes of inner side panels (P) and (Q)
and middle panels (K) and (L).
Figure 6
Place adjustable shelves (Y) and (Z)
onto the shelf pins (13) in each
section.
S
6
20
13
3
3
3
3
6
13
Z
Y

Figure 7
Attach left door (T) to left side panel (P)
and right door (U) to right side panel
(Q).
Attach metal knob (7) to doors (T) and
(U) with bolts (8).
Figure 8
Attach drawer side panels (B) and (C)
to drawer back panel (E) using screws
(14).
Tighten screws (14) with Phillips
screwdriver.
Insert drawer bottom panel (D) into the
grooves of panels (B), (C), and (E).
Attach drawer front panel (A) to the
assembled unit using screws (14).
Finally, attach handle (11) to the
drawer front panel (A) using bolts (12).
Tighten screws (12) with Phillips
screwdriver.
T
U
7
8
14
14
14
14
Q
P

Figure 9
Attach lower drawer back panel (G) to
lower drawer bottom (F) by inserting
small wood dowels (5) into
corresponding holes until the panels
meet. Then use screws (14) to connect
them together.
Tighten screws (14) with Phillips
screwdriver.
A
ttach lower drawer side panels (H) and
(I) to assembled unit by inserting small
wood dowels (5) into corresponding
holes until all the panels meet. T
hen use
bolts (22) and metal nuts (21) and
screws (14) to connect lower side
panels (H) and (I) and lower bottom (F)
together.
Tighten bolts (22) and screws (14) with
Allen wrench (20) and Phillips
screwdriver.
Finally, attach handle (11) to the lower
drawer bottom (F) using bolts (12).
Figure 10
Attach back panels (V), (W) and (X) to
the back of the unit with screws (10) as
shown.
Tighten screws (10) with Phillips
screwdriver.
10 VW
X
V
20
14 14
14
22
22

Figure 11
Insert drawers into assembled unit as
shown.
Make sure all slides glide smoothly in
and out.
Note: There is a lever located on the
male slide for bottom drawer slide.
Push the lever to the either side in
order to detach the male slide from
the female slide.
Figure 12
Attach brackets (15) to back panel
using screws (16).
Tighten screws (16) using Phillips
screwdriver.
Mark two desired locations on the wall
and drill two 3/16" holes.
Insert plastic anchors (17) into the two
holes on wall as shown. Use a
hammer to insert the plastic anchors
until they are flush with the wall.
Then attach the brackets (15) onto the
wall using screws (18).
Tighten screws (18) using Phillips
screwdriver.

Figure 13
Move this item close to the wall
brackets (15) and tie in all brackets
(15) together with plastic strap (19) as
shown in diagram.
Anti-tipping hardware must be used
for this product to avoid tipping and
injury.
Figure 14
Now your multicolor apothecary
console/TV stand is ready to use.

Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at serv[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Page 4
Page11

CAUTION
The top shelf is intended for a flat screen television with a maximum overall width of 50” and supports up to 175
lb.
The top shelf is NOT INTENDED for tube televisions.
Each center shelf should not be loaded with more than 20 lb, Each side shelf should not be loaded with more
than 15 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible injury.
This unit contains a permanent warning sticker located on underside of top shelf or inside drawer.
Do not allow children under 16 years to move the cart.
Model: MS555200TX
MULTICOLOR APOTHECARY CONSOLE/TV STAND
Southern Enterprises, Inc
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 08/5/2014