SP tools SP81482 User manual

USER MANUAL
IMPORTANT
ALL PERSONS WHO ARE TO USE THIS EQUIPMENT MUST THOROUGHLY READ
AND UNDERSTAND THIS INSTRUCTION MANUAL PRIOR TO OPERATION.
SP81482
MINI COB LED
ADJUSTABLE
FLOOD LIGHT
RETAIN THESE INSTRUCTIONS
AND ATTACH RECEIPT TO
MANUAL FOR FUTURE
REFERENCE
NOTE: Proof of purchase must be retained by
the customer as it will be required in the
event of a claim under warranty.
AFTER SALES SUPPORT:
AUSTRALIA: Visit the website’s contact page to get in
touch with your local service department.
WWW.SPTOOLS.COM
INTERNATIONAL:Use the county selector to get in touch
with your service department in your country or region.

2
CONTENTS
Introduction 2
Intended Use 2
Scope of Delivery 2
Safety Symbols 2
Warning 3
Technical data 4
Operating Instructions 4
Charging Process 5
Stand 5
Clamp 6
Maintenance 6
Disposal & Recycling Information 6
Warranty Details 7
INTRODUCTUCTION
Thank you for buying this SP Tools product. You can find all the information you need in
these operating instructions.
Please read the instructions completely with care and observe the advice given. The
operating instructions are part of the Mini Flood Light and should be kept intact. The
manufacturer is not liable for personal injuries and material damages which result from
improper use.
Intended Use
Tools may in principle only be used for the purpose intended, under the conditions
envisaged and within the limitations as to their use.
•For domestic and commercial use. •Non-flammable environment
•Dry environment.
Scope of Delivery
•1 x Mini Flood Light • 1 x Micro USB Cable (for charging)
•1 x 240v Plug/Charger • 1 x 12v Car Charger
•1 X Spring Loaded Clamp • 1 x Owner’s Manual
Safety Symbols
-------Recycle lm---------lumen
------ Use Indoo -------Read Manual
-------Do Not Throw in Garbage V---------Volts
mA--------Milliamps A---------Amps

3
1. Only plug the charger into a 240 Volt ac power outlet.
2. Before using charger, read all instructions and cautionary markings on battery packs
and chargers.
3. The battery charger is intended for indoors use only.
4. Do not expose or use the charger in rain, snow or other damp or wet locations.
5. Do not operate the charger in direct sun light or extreme temperature conditions.
6. Do not use the charger in an environment with flammable liquids, dust or gases.
7. Guard against electric shock. Keep children away. Do not let visitors touch the tools
or power cord. All visitors should be kept away from work area.
8. Caution: To reduce the risk of injury, charge only SP Specified Lithium Ion type
rechargeable battery packs. Other types of battery packs may burst or explode
causing personal injury and damage.
9. To reduce the risk of damage to electric plug and cord, disconnect the unit by pulling
on the plug, rather than the cord whenever disconnecting the charger.
10. The use of an attachment, not recommended or sold by the charger manufacture may
result in a risk of fire, electric shock, or injury to persons.
11. Make sure the cord is located so that it will not be stepped on, tripped on, tripped over,
or otherwise subjected to damage or stress.
12. Do not operate charger with damaged cord or plug. Replace them immediately.
13. Do not operate charger if it has received a sharp blow, been dropped, or otherwise
damaged in any way, take it to qualified service centre.
14. To reduce risk of electric shock, unplug charger from outlet before attempting any
maintenance or cleaning.
15. Do not wipe plastic parts with solvent. Solvents such as gasoline, thinner, benzene,
carbon tetrachloride, alcohol, ammonia and oil containing chloric annex may damage
and crack plastic parts. Cleaning must be done when the charger is unplugged - Wipe
plastic parts with a soft cloth lightly dampened with soapy water
16.Do not disassemble charger or battery pack, take it to a qualified service centre
when repair is required. Incorrect reassembling may result in a risk of electric shock
or fire.
△!
△
!WARNING

4
Technical data
Capacity
3 hrs. Burn Time (High)
Capacity
6 hrs. Burn Time (Low)
Light Source
COB LED
Luminous Power
500 / 1000 Lumen
Charging Time
5.5 hours approx.
Battery
3.7v/4400mA
Battery Type
Lithium – ion
Charger
50 Hz/240v
Output Voltage
5v/1000mA
Charging Cable
Micro USB
Splash Water Protection
IP65
Operating Temperature
-10°C - +40°C
Operation
Identification
Magnetic Stand
Optical Lens COB LED
Mini USB Charge Port
Multi-Function on/off Switch
Battery Indicator

5
Multi-function on/off switch
To turn the light on push the multi-function switch once.
(This will give you 1000lm & up to 3hrs of burn time)
Pushing the multi-function switch a second time will dim the
light by half.
(This will give you 500lm & up to 6hrs of burn time)
Pushing the multi-function switch the third time will turn the light off.
Battery charger indicator
The battery charger indicator is located on the back of the lamp and consists of 4 LEDs.
These indicate the actual battery charge status.
Charging process
The micro USB charging socket is located next to the on/off switch on the back of the light
below the rubberized protective cover. Pull the water-resistant cover off to expose the
micro USB port. Plug the micro USB cable into the light and the USB end into an
appropriate USB port (e.g. Computer / Phone Charger/240v USB plug).
The charging process is symbolized by a flashing green LED on the charge control
indicator. When fully charged, all 4 LEDs light up.
Magnetic Stand
The folding magnetic stand has two main functions.
•Can stick to magnetic surfaces so you can position the light where it is needed.
•When there is not a magnetic surface the stand can be used to position the light
where it is needed.

6
Spring Loaded Clamp
When there is no magnetic surface for the light to
stick to, you can use the supplied spring-loaded
clamp. For example. if you are working on an
aluminum ladder.
Using the supplied M8 bolt, fix the lamp to the
clamp. Then you can safely clamp the lamp and
position it to light up your job.
Maintenance
Fully charge the light before first use.
Recharge after every use.
When not in use recharge every 3 mouths.
*Warning*
The lamp must not be switched on whilst being charged.
Only use supplied 5v/1A charger to charge lamp
Disposal & Recycling Information
When the tool reaches its end of life, take it to a collection point designated by local
Authorities for E-wast.
The separate collection and recycling of your product at the time of disposal will help
conserve natural resources and ensure that it is recycled in a manner that protects human,
heath and the environment.

7
LIMITED WARRANTY
This Limited Warranty applies only to new products* distributed by SP Tools Pty Ltd (“SP Tools”). It is a condition of this Limited
Warranty Policy that the purchaser read the owner’s manual for the product and only use the product to the extent or for the
purposes stated therein. The purchaser must also ensure that all servicing requirements are completed as listed in the owner’s
manual (said servicing is at the owner’s expense). We recommend that all servicing is completed by an authorised service agent and
that records of said servicing are retained by the purchaser as proof in the event of a warranty claim.
Whilst the owner’s manual, packaging, and/or other documentation supplied with SP Tools’ products may provide details in respect
of a Limited Warranty, the terms set out herein supersede these matters, and this Limited Warranty applies in their place. This
warranty is no less advantageous than otherwise described in such other documentation.
SP Tools agrees, subject to the terms and conditions specified below, to repair or replace at SP Tools’ cost, the product purchased by
you when the product does not perform in accordance with its specifications during the limited warranty period, due to any fault in
manufacturing, materials and/or workmanship. SP Tools is not liable to repair or replace products that the purchaser uses in a
manner that is inconsistent with the owner’s manual or in the circumstances set out in paragraphs 1.1 – 1.7 below.
The benefits to the purchaser under this warranty are in addition to other rights and remedies under the Competition and Consumer
Act 2010 (Cth). The limited warranty period, within which a defect in the product must appear, commences from the date of
purchase and ceases on expiration of the specified term below.
THE LIMITED WARRANTY PERIOD
• SP Speciality Tools – 12 Months
THE PURCHASERS ATTENTION IS DRAWN TO THE FOLLOWING
To the extent permitted by law and subject to this Limited Warranty, and as part of the terms of the sale of the equipment or part
thereof: SP Tools shall not be liable for any form of loss, damage, cost, injury or harm of any kind (whether direct, indirect, special
or consequential) howsoever arising from the use or supply of the equipment to the purchaser.
EXCLUSIONS TO LIMITED WARRANTY POILICY
This Limited Warranty will not apply where the equipment or any part thereof:
1.1 Fails due to an accident (including liquid spillage), abuse, misuse, neglect or normal wear and tear;
1.2 Has been used in a manner other than for which it was originally designed;
1.3 Has been tampered with or is otherwise than as supplied by SP Tools;
1.4 Where any damage, malfunction or other failure of the equipment or any part thereof resulted directly or indirectly from
unauthorized persons, adjusting or failing to adjust any part requiring normal maintenance and service (examples include
adjustment of tappets, air filter maintenance, lubrication and tightening of screws nuts and bolts);
1.5 Malfunctions due to the use of defective or incompatible accessories;
1.6 Is damaged by lightning or thunderstorm activity; or
1.7 Has been transported to a country where no authorised Service Agents exist.
CLAIMING WARRANTY
This Limited Warranty may be claimed on in the following manner:
2.1 In order to make a claim under this Limited Warranty, the purchaser must deliver the equipment or any part thereof to an
SP Tools authorised repair agent and pay all costs of transportation and all costs incidental to making a claim under
this Limited Warranty. The purchaser must first contact SP Tools (contact details described above) and request the
delivery address of an SP Tools authorised repair agent.
2.2 The purchaser must deliver to the repair agent written reasons why the purchaser considers that the purchaser has a claim
under this Limited Warranty and must provide all necessary details, including:
• The place, date and from whom the unit or part was purchased.
• The unit or part involved, Model and Serial Number.
• The defect, malfunction or failure in respect of which the claim is being made.
• Proof of service of the unit or part (if applicable)
• Proof of purchase in respect of the unit or part.
2.3 If the Limited Warranty claim is valid, the repair agent will carry out repairs and return the product at no charge to the
purchaser. These repairs are limited to the Limited Warranty fault identified and as such will not include any other faults due to
misuse, abuse, failure to maintain, fair wear and tear or the replacement of serviceable items such as oil, spark plugs, air filters,
fuel etc.
Our goods come with guarantees that cannot be excluded under Consumer Law. You are entitled to a replacement or refund for a
major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Note:Units which are failing to perform in accordance with specifications due to non-warrantable causes will be subject to freight,
repair and or quote charge