Spark R55a User manual

Spark R55a Mobile Phone
QUICK START
GUIDE

1: Start by inserting
the SIM card
Insert the SIM card with the
gold contacts facing down and
the bevelled edge on the top
left as shown. Carefully slide it
into the housing observing the
correct orientation.
If your handset displays:
Enter Handset unlock code
The default code is 0000
Enter SIM PIN Code
Enter the PIN supplied with your SIM card
No SIM detected
Check the SIM is inserted correctly
Enter PUK code
Contact your service provider

2: Then insert the battery
1. Open the battery cover using
the thumb notches on the
bottom on the cover.
2. Insert the battery as shown with
the contacts located against the
gold springs.
3. Press the battery down flush into
the case.
4. Line the battery cover up
correctly and press firmly down
to close the case.
5. It is important to keep the
battery cover, antenna port and
USB port cover properly closed
to maintain IP67 protection from
liquid and dust.

3: Finally, switch on
your handset
Press and hold the red key
for two seconds to switch the
phone on or off.
For more information
There are some additional resources
available online for you to download.
• If you want a full copy of the User
Guide please download from the
manufacturer’s website at zte.co.nz.
Just select your product and go to
the Downloads tab.
• You can connect your phone to a
computer to create back-ups of
your Contacts, save and copy your
photos and music files and use
other features such as dial up
networking. Please download and
install the Join Me software from
the manufacturer’s website at
zte.co.nz. Just select your product
and go to the Downloads tab.