Speler SP-LED40 User manual

TV User manual
Remote Control Stand Screws Batteries
Model no.: SP-LED40
1. TV Parts
R
USER’S GUIDE
Warranty Card
User’s Guide
2. Stand Assembly Instructions
Step 1
Place the TV faced down on a soft cloth or cushion to prevent the panel from being damaged.
Step 2
Align the screw holes on stand and TV bottom.
Step 3
Tighten the included screws with a screw driver.
NOTES:
- Unplug the power plug first when installing or removing the TV Stand.
- To avoid any damage to this TV, contact one or more partner for assistance when installing or removing the TV stand.
Your TV may be packaged with the Stand and the Cabinet separated. Before enjoying this TV,
please carry out the Stand Installation according to the instructions below.
1 2
3

3. Remote Control Batteries Installation
4. Quick Start
1) Connecting to AC power source
2) Power ON
Plug into a wall socket
Press key “POWER” on the remote control or key “POWER”
on the back of the TV to turn on (Blue indicator)
3) First time installation
If this is your first time turning on this TV, Setup Wizard will appear on the screen.
- Press UP or DOWN navigation button to select preferred item.
- Press RIGHT navigation button or ENTER button to enter
next menu page.
- Press LEFT or RIGHT navigation button to adjust the value.
NOTES:
- In Setup Wizard, the users can adjust Menu Language, Time Zone,
Daylight Saving Time, Time Format and Air / Cable.
- If Air / Cable item has been selected, press UP or DOWN navigation
button to select Go to next step in the menu and then press RIGHT
navigation button or ENTER button to start auto channel searching.
- Press MENU or EXIT button to exit auto channel searching.