Spoondoolies-Tech SP3X Installation instructions manual

SP3X
Rack Mounting Guide
September 2014
Document Revision 1.0

SP3X Rack Mounting Guide
SP3X Rack Mounting Guide Release Date: September 2014
COPYRIGHT
© Spoondoolies-Tech Ltd. 2014. All rights reserved.
www.spondoolies-tech.com
Changes are periodically made to the information in this document. Changes are published as release notes and later incorporated into
revisions of this document.
No part of this document may be reproduced in any form without prior written permission from Spoondoolies-Tech.
TRADEMARKS
Any companies and product names mentioned herein may be the trademarks of their respective owners.
NOTICE
The information in this document is deemed to be correct at the time of publishing. Spoondoolies-Tech reserves the right to change
specifications without notice. Spoondoolies-Tech is not responsible for incidental, consequential, or special damages of any kind in
connection with using this document.
REVISION HISTORY
Date
Revision
Description
September 2014
1.0
First Release
Version 1.0 2

SP3X Rack Mounting Guide
Table of Contents
1Introduction.............................................................................................................................................................. 4
1.1 Scope ............................................................................................................................................................ 4
1.2 Related Documents ...................................................................................................................................... 4
2Mounting Procedure ................................................................................................................................................ 4
3Connection and Configuration.................................................................................................................................. 6
Version 1.0 3

SP3X Rack Mounting Guide
Introduction
1Introduction
The SP3X is the most powerful Bitcoin miner available in the current market. With amazing hash power and
remarkably low power consumption, the SP3X has a slim 2U case suitable for both home and data center hosting.
1.1 Scope
This guide describes how to mount the SP3X in a standard 19” rack.
1.2 Related Documents
•SP3X Quick Start Guide
•SP3X User Guide
•SP3X FAQs
2Mounting Procedure
To mount the SP3X in a rack:
1. Verify that the distance between the front and rear rack rails does not exceed 640mm to allow at least 50mm
overlap between the SP3X and the rear mounting brackets that you will mount on the rear rails:
Version 1.0 4

SP3X Rack Mounting Guide
Mounting Procedure
2. On the rear rack rails, attach the right and left rear mounting brackets and secure using two screws on each
bracket:
3. Place the rear of the SP3X rear on the rear mounting brackets and secure the front of the unit to the rack rails
using two screws on each of the brackets attached to the SP3X.
Version 1.0 5

SP3X Rack Mounting Guide
Connection and Configuration
4. Visually check that the SP3X is positioned properly on the rear mounting brackets.
3Connection and Configuration
Connect and configure the SP3X as described in the SP3X Quick Start Guide.
Version 1.0 6