2
3. Insert SIM into the tracker making sure it is pushed all the way in and ‘clicks’ into place. Replace the
rubber cover. It will only go in correctly one way.
4. Turn the unit on by pressing the paw print button. To turn off the unit you need to press the power
button for 2-3 seconds, release and press again straight away. This is to prevent the button being
accidentally pressed and powering off.
5. Take the unit outside with clear line of sight to the sky. The unit needs to locate the GPS Satellite
position. This can take up to 4 minutes on the first occasion but should be almost instant after first
connection.
Note: The Blue LED will start to flash when the unit has established a GPS connection.
6. Send the following text messages to the SIM card phone number in order:
a. “Begin123456”–Reply “begin ok”.
b. “Admin123456 (phone number of the phone you are using)”. E.g. admin123456 0784332112 –
Reply “admin ok”.
Note: You can skip this step if you don’t want to set an admin number. An admin number will mean the unit
will only respond to messages from one phone number. This protects the unit from being contacted by other
people and numbers and then giving the location of the unit. See user manual for details on how to change
admin number.
c. “Apn123456 giffgaff.com”–Reply “apn ok”.
d. “Apnuser123456 giffgaff”–Reply “apnuser ok”.
e. “Apnpasswd123456 (blank)”–Reply “apnpasswd ok”
The GiffGaff network doesn’t have a password however you still need to send command E. Make sure you
put a space after the number 6 in “Apnpasswd123456” otherwise it won’t work correctly.
Note: The APN settings are for the giffgaff SIM network and will be different if you use another network
provider. Please contact your SIM provider for your APN settings.
f. “Gprs123456” – Reply “gprs ok”
g. “Tracker123456” – Reply “tracker ok”