SSP PROFESSIONAL LIGHTING SMART 280 W User manual

SMART 280 W

www.sspworld.com
2
User Manual
Index
It e m ......................................... .. . 02
1. Pr odu c t Introduction ........... ................. . 03
2. Fi xtu re S ize ................................... . 03
3. Pr odu c t Part Not e .............................. . 04
4. Saf e ty Inf or mat i on .............................. 05
5. Pac k i ng And Sh i pp i ng ......................... . . . 07
6. AC P ow er ..................................... 08
7. L amp Model And Chan gi ng ...................... . 08
8. C olor Wheel And Gobo Wh eel ..................... . .. 10
9. Cont rol P an el . .............................. ... . .. 11
10. Cont rol Panel O p er at e . .......................... 12
11. Chann el s Int r odu c t i on ........................... 20
This product manual contains important information about the safe installation and use of this projector.
Please read and follow these instructions carefully and keep this manual in a safe place for future
reference.
STATEMENT
The product is good packing when ship out the factory. All users should strictly abide by the
warnings and instructions stated in this manual, any damage and results due to misuse and the
neglect of this operating manual will be excluded from the deal responsibility this manual will not
informed in additionally if have technical changes.

www.sspworld.com
3
1. Product Introduction
Thank you for choosing this 280W Beam Spot product, this model is the moving head light which is the
latest development of the smart, efficient products, beautiful shape, smooth, combined with the
advanced technology of today's stage lighting products with international advanced electronic control
technology and excellent user-friendly industrial design , fully comply with CE standard, accepted
international standard DMX512 signal mode.
This 280W Beam Spot light, adopt Osram discharge short arc lamp with integrated reflector as a
condenser system, coupled with the high-quality optical lens components, broadband voltage, a
clear pattern, sharp and uniform output light efficiency. Intelligent LED display module, the
English language selection mode, intuitive operating menu, shortcut.
280W Beam Spot light, have 2 international standard DMX512 channels and 1 optional user-
defined channel. Horizontal scan: 540 °, vertical scanning 270 ° (16 bit precision scanning). The
color wheel is combined with white and 13 colors. Rotating gobo wheel: 9 rotating, indexable and
replaceable glass gobos and open. Static gobo wheel:14 aluminum gobos and open; 0 ° parallel
beam; Beam zoom: 2.5 ° -10 ° ;Spot zoom: 5 ° -20 ° ;Innovative 6 prisms and traditional 8
prisms;0-100% mechanical dimmer, support mechanical strobe and variable strobe effect, strobe
macro function ,with overheating protection function.
This moving head lights are widely used in television, disco, dance halls, nightclubs, large-scale
performances and other professional venues.
Net weight：19KG | Color Temperature：9300K | Power：470W
2.Fixture Size
Size：388（L）×268（W）×591（H）mm

www.sspworld.com
4
安
03
3. Product Part Note
01
03
02 01 —
Lens
02 —Light body
04 03 —Vertical
Lock
04 — Arm
05 —Horizontal Lock
05 06 —
Handle
07 —Light Holder
06
07
01 —Display
Screen
02 —Control Wheel
01
02
02
04
01 —3 Pin
Signal
02 —5 Pin Signal
03 —Power Switch
04 —Input Power
05 — Fuse
01 03
05

www.sspworld.com
5
4. Safety Warning Information
This product is only suitable for professional use, and does not apply to security for other purposes.
After you get the lights, please check the package whether have any damage caused by transportation.
If there is any damage, do not use this fixture, and please contact the dealer or manufacturer as soon as
possible.
This product is only suitable for indoor, IP20 protection level. Lamps should be kept dry to
avoid moisture, overheating or dusty environment. Prevent lamps come into contact with water or
any other liquid. The use of this product should pay attention to: fire, heat, electric shock,
ultraviolet radiation, the lamp to explode or shedding caused serious or fatal injury.
Need to read the instructions before use energized or installing. Follow through the operation of
security methods and pay attention to the warning signs on the specification and equipment. If you
have any problem for how to safely operate the equipment. Please contact your dealer.
4.1 ANTI-HIGH TEMPERATURE
Ta =40°C
Please don’t use the equipment if the temperature above 40℃
4.2 BURST PREVENTION
The lens should be changed if had damaged or any problems. Don’t change the
non-original manufacturer lens.
Lens size： ￠ 74 × 30 mm .
4.3 TO PREVENT FALLING WOUNDING
Please don’t move the package by one person only.
When hang the fixture, please must verify that the facilities to be able to withstand the
weight of the lamps at least 10 times more.
Please make sure the Mounting hardware is strong enough no any damage, and insurance
for the safety rope as auxiliary security fixed in other facilities will need to verify before
installation. Installing or removing the equipment, to make the pulley below the work
location
4.4 UA PROTECTION AND THE BULB EXPLOSION
Prohibit straight viewpoint with exposed bulbs to avoid UV damage to the eyes;
Do not use the equipment without the lens screen and the lid;
The lens and the light head covers should be timely replaced if any damage to rupture
The Fixture should be used with the protection screen together.

www.sspworld.com
6
4.5
PREVENTION OF ELECTIC SHOCK
The electrical connection must only be carried out with corresponding qualifications;
Before installing, make sure you use the power voltage lamps must comply with the
identified power, voltage and have an overload or leakage protection;
Each lamp must be properly grounded, installed in accordance with the relevant standards;
Cut off the power when stall or replace the lamp and the fuse;
Prohibit the use of a lightning storm or wet environment.
4.6 TO PREVENT BURNING OR FIRE
1. The fixture can be mounted directly on the surface of ordinary combustible material.
2. Do not short-circuit temperature protection switch or fuse, use the specified type of fuse.
3. The equipment must be installed away from inflammable and explosive materials.
4. The equipment should be projected range of 3 meters away objects and projectiles temperature
less than 60 ° C; ---- 3.0m.
5. Fan or ventilation, at least in the range of 0.5 meters can not be an obstacle.
6. Do not place any object on the lens.
7. Handling at least allow the device to cool for 20 minutes.
8. Do not replace the non-original parts
4.7 TRANSPORT PROTECT LOCK
In order to protect the light, there is a protect lock; During the transport , the lock will closed
keeping the item in safety state.
4.8
ABOUT PACK LIGHT
1. Before packed, make sure power is off, and wait for at least 20mins for cooling down.
2. Before clean the fixture, make sure X, Y axis protect lock closed.
3. After packed by plastic bag, high-lift the fixture with two handles besides the product. put
the product into the fly-case up-side-down.
4. After packed the product, put the accessory into the accessory case, then closed and lock the
fly-case.
5. Fly-case only up stacked two layers. Prohibited upside down
6. When packed with carton box, equipment should be put into the foam first, then set into a
carton, pay attention to the vertical position.
4.9 UNPACKING
Note: Before unpacking check the damage is whether due to the transportation or not, if you find
any such damage, please do not use this item, and contact with the dealer or manufacturer as soon
as possible.

www.sspworld.com
7
1. Open the fly-case, and discover the inside plastic bag.
2. High-lift the product by two handles beside the bottom base and move it out.
3. Before power on, make sure you have opened the X, Y axis lock!
WARNING
Fixture must use two fixing devices, and make sure the fixing device have locked! And only fully
clockwise rotate 90 ° can lock the hang fixture! Do remember plus a safety rope, and do not
connect the safety rope to plastic handle. It should be connect to the hole on the base!
Attention! One product only can accept one input one output.
DMX512 cable must use the professional shielded twisted pair cable; standard loudspeaker cable
is not reliable to control the long-range data. 24AWG cable is suitable for more than 300 meters
long-distance signal transmission and must add DMX 512 signal amplifier.
Do not use two outputs to separate the connection, if separate a continuous connection to branch,
DMX512 splitter is necessary.
Attention! Do not overload the connection. One continuous connection can only connect up to 32
devices.
If use the DMX512 splitter. At first connect DMX512 Splitter input terminal to controller .And
then connected from the splitter output terminal to next device.
Do as above guide to connect other device, and finally coupled with terminal insertion
5.PackingAnd Shipping
280w Beam Spot light is packed with fly-case of one in one ,two in one ,or carton box.
Attach follow accessory.
ACCESSORY
Name
Quantity
User Manual
1PCS
Safety Rope
1PCS
Light Hook
2PCS
Signal Cable
1PCS

www.sspworld.com
8
6.Alternating Current Power Supply
6.1 VOLTAGE, POWER, FUSE
SPECIFICATION
Input Voltage
Total Power
Frequency
110 ~ 240 V
470 W
50 / 60 H Z
Fuse Voltage
Current
Specification
250 V
6 A
5 × 20
6.2 POWER PROTECT
The equipment must be operated by professionals; Make sure that the voltage of power supply
must be comply with the voltage identified on the lamp, and must have an overload or leakage
electrical protection.
Live Wire(L)
Null(N)
Ground Wire
R e d
G r ee n
Y e ll o w & G r ee n
7. Lamp
7.1 280W BEAM SPOT LAMP INTRODUCE
Lamp Model
Power Of Lamp
Life/Hour
Color Temperature
O S R M A
280 w
2200 H o u r s
9300 K
WARNING! There is a safety hazard or damage if install similar bulb To
reduce the risk of damage to light ,do change the lamp before using time over
125% of lamp life .
7.2 280W BEAM SPOT LAMP REPLACE
Attention! When replace the lamp is forbidden to touch lamp with bare hand, to
avoid the greasy dirt stains filament. filament must be kept clean.
1. Disconnect the power.
2. Use cross screwdriver to open the light body cover;

www.sspworld.com
9
3. After remove the light body cover,you can see the lamp clearly.Before replace
lamp, fixture need 20 minutes for lamp cooling. Fasten the head with Y axis
protect lock in 60 ° position.
4. Open stainless steel tablet holder with one hand and the use other hand to pull out
the bulb at oblique 15 °
5. After you remove the lamp,check whether is the lamp clean,use the clean
rag to wipe the lamp,make sure the light is with better light output.
6. Install the lamp.
8.ColorWheelAnd Gobo Wheel Describe
280w Beam Spot light adopts 13 colors+white, colors are pure and with great effect.

www.sspworld.com
10
280w Beam Spot light is with 14 fixed gobo wheels+ white,abundant patterns with 8 prisms or 6
prisms will create amazing effect.
280w Beam Spot light is with 9 rotation gobo wheels +white,gobo wheels run smooth and easy to
change.

www.sspworld.com
11
280w Beam Spot light adopts innovative 6 prisms and traditional 8 prisms.
Prisms and Gobos with focus ,rotate,zoom & shake effects,rotate speed can be adjust.
9.Control Panel
Display
Screen
Control Wheel
Display Screen: mainly display product information date;
Control Wheel: with turn left,turn right and enter three functions;
Turn Left：increase date,roll the menu；
Turn Right：decrease date,roll the menu；
Enter：confirm.

www.sspworld.com
12
10. Control Panel Operate
Main Menu
Sub Menu1
Sub Menu2
Function
setting
"Address "
DMX address setting
"Display
"
"ShowRev "
"Natu"
Normal display
"Revl"
Reverse display
"Language"
"Chin"
Chinese display
"Engh"
English display
"BrigSett"
10% - 100%
Brightness setting
"Backligh"
"Ligh"
"1MIN"
"5MIN"
"8MIN"
"MenuBack"
"Off "
Menu don’t return
"1MIN"
Display light 1Min ,then return
main menu
"5MIN"
Display light 5Min ,then return
main menu
"8MIN"
Display light 8Min ,then return
main menu
"BackFlah"
"Off "
No flicker when no signal
"Open"
Display flicker when no
signal
"Return "
▲
"Special "
"XY Setup"
"Xreverse"
"Off "
Horizontal scan normal
"Open"
Horizontal scan reverse
"Yreverse"
"Off "
Vertical scan normal
"Open"
Vertical scan reverse
"XY
"Off "

www.sspworld.com
13
Fback"
"Open"
Open XY optical couple
check
"Return "
▲
"Shortcut"
"Off "
Color wheel and gobo
wheel go shortest route
"Open"
Color wheel and gobo wheel
not go shortest route
"ChunMode
"
"Smal"
Simplify channel mode
"Stan"
Standard channel mode
"Exte"
"RunMode "
"Slve"
Light receive outside signal
control
"Musc"
Light receive outside signal
control
"Auto"
Light auto run with built-in
program
"SigClear"
"Off "
Keep signal date when no
signal
"Open"
Clear signal date when no
signal
"DMXReset
"
"Off "
Not receive console signal
reset
"Open"
Receive console signal
reset
"Return "
▲
Return main menu
"LampSett
"
"Default "
"Off "
Start light without
power,the lamp is off
"Open"
Start light without
power,the lamp is on

www.sspworld.com
14
"Control "
"Off "
Manual control lamp off
"Open"
Manual control lamp on
"DmxLamp
"
"Off "
Forbid outside signal
control lamp
"Open"
Open outside signal control
lamp
"LampTime
"
0000-9999
Record lamp use time
"ClearTim"
"> "
Input password,confirm
"Ilum"
Clear lamp use time
"LampStat"
"Wink"
Lamp is on
"Ilum"
Lamp is off
"PowerSav"
"Off "
Stop Power save function
"Open"
Start Power save function
"Return "
▲
"InfoSee "
"WorkHour
"
0000-9999
"Times "
0000-9999
"Fan1Sta "
0-255
"Fan2Sta "
0-255
"VersiTFT"
V0.XX
"Versi XY"
V0.XX
"M1 Versi"
V0.XX
"M2 Versi"
V0.XX
"SpareTim"
0000-9999
"SpareCut"
0000-9999
"Return "
▲
"Control
"
"Pan "
000-255
"PanFine "
000-255

www.sspworld.com
15
"Tilt "
000-255
"TiltFine"
000-255
"XY Speed"
000-255
"ReseLamp"
000-255
"Color "
000-255
"ColrFine"
000-255
"EffectSP"
000-255
"StaticGB"
000-255
Rot Gobo"
000-255
"Gobo1Rot"
000-255
"GbRotFin"
000-255
"PrismInt"
000-255
"PrismRot"
000-255
"Frost "
000-255
"Zoom "
000-255
"ZoomFine"
000-255
"Focus "
000-255
"FousFine"
000-255
"AutoFous"
000-255
"Shutter "
000-255
"Dimmer "
000-255
"DimmFine"
000-255
"Return "
000-255
"AssiTool"
"Factory "
>
Input password,confirm
"Eprt"
"Save"
"Deft"

www.sspworld.com
16
"Defaults"
>
"Eprt"
"Save"
"Redress "
"Pan "
000-255
"Tilt "
000-255
"RotGobos"
000-255
"GoboRot "
000-255
"FixeGobo"
000-255
"Colour "
000-255
"Focus "
000-255
"Zoom "
000-255
"Shutter "
000-255
"Shutter "
000-255
"Beam
"(liner
prism)
000-255
"PrismRot"
000-255
"BeamRot
"(linear
prism rot)
000-255
"Frost "
000-255
"Return "
▲
"ChDefine"
"Pan "
00-32
"PanFine "
00-32
"Tilt "
00-32
"TiltFine"
00-32
"XY Speed"
00-32
"ReseLamp
"
00-32

www.sspworld.com
17
"Color rot
"
00-32
"ColrFine"
00-32
"EffectSP"
00-32
"StaticGB"
00-32
"Rot Gobo"
00-32
"Gobo1Rot"
00-32
"GbRotFin"
00-32
"PrismInt"
00-32
"PrismRot"
00-32
"Frost "
00-32
"Zoom "
00-32
"ZoomFine"
00-32
"Focus "
00-32
"FousFine"
00-32
"AutoFous"
00-32
"Shutter "
00-32
"Dimmer "
00-32
"DimmFine
"
00-32
"Return "
00-32
"FactSet "
"TimeLimi"
0000-9999
hours
"TimsLimi"
0000-9999
times
"ClearTim
"
"> "
"Ilum"
Cancel
"ClearCunt
"
"> "
"Ilum"

www.sspworld.com
18
"Passwor1"
000-255
"Passwor2"
000-255
"Passwor3"
000-255
"Passwor3"
000-255
"Passwor4"
000-255
"X Drivin"
000-255
"X Slave "
000-255
"Y Drivin"
000-255
"Y Slave "
000-255
"LampPowe
"
"Off "
"Open"
"YAngle "
000-255
"Return "
▲
"Checksum"
Check sum
000-010
000-255
"Return "
▲
"Return "
▲
"ChanLev
el"
"Pan "
000-255
"PanFine "
000-255
"Tilt "
000-255
"TiltFine"
000-255
"XY Speed"
000-255
"ReseLamp"
000-255
"Color "
000-255
"ColrFine"
000-255
"EffectSP"
000-255
"StaticGB"
000-255
"Rot Gobo"
000-255

www.sspworld.com
19
"Gobo1Rot"
000-255
"GbRotFin"
000-255
"PrismInt"
000-255
"PrismRot"
000-255
"Frost "
000-255
"Zoom "
000-255
"ZoomFine"
000-255
"Focus "
000-255
"FousFine"
000-255
"AutoFous"
000-255
"Shutter "
000-255
"Dimmer "
000-255
"DimmFine"
000-255
"Return "
000-255
"ALLRese
t"
"Off "
Not reset
"On"
Light reset
"XY
Reset"
"Off "
Not reset
"On"
XY reset
"EffecRst"
"Off "
Not reset
"On"
Effect reset
"ExitMenu
"
▲
Exit menu
11.
Channels Introduction
Channel
Channel
DMX Value
Function
Channel 1
Channel 1
Pan
0 - 255
Pan

www.sspworld.com
20
Channel 2
Pan fine
0 - 255
Pan fine
Channel 2
Channel 3
Tilt
0 - 255
Tilt
Channel 4
Tilt fine
0 - 255
Tilt fine
Channel 3
Channel 5
Pan - Tilt - (Pan fine - Tilt fine) Speed
0-255
0 → 100% Pan - Tilt - (Pan fine - Tilt fine)
Speed（max to min)
Channel 4
Channel 6
Power/Special functions
0 –9
Default- Ballance Filter when glass gobo
10 –14
Heat Filter Only - Bright Mode
15 - 19
Ballance Filter Only - Ballance Mode
20 -24
Eco mode ( Lamp power 230W)
25 - 129
Reserved
130 –139
Lamp On
140 –159
Reserved
160 - 169
color system and gobo wheel reset
170 -199
Reserved
200 –209
Total reset
210 –229
Reserved
230 –239
Lamp Off
240 –255
Reserved