stateless LUXON LX-SM4x100G-4228 User manual

Back Panel I/O Ports
VGA Port Management Port 2
Dedicated IPMI LAN Unit Identification (UID) switch
USB3.0 Ports (0, 1, 2, 3) Network Interface Card 1
LX-SM4x100G-4228 LUXON Server Quick Reference Guide
CHASSIS FRONT PANEL LEDs
INDICATORS & ALERTS BACK PANEL CONNECTIONS
1
1
2
35
6
2
3
4
5
7
146 8
235 7
1
4
2
3
Feature Description
UID Button Illuminates a front & back LED to ID unit
Info LED SEE TABLE BELOW
NIC 2 LED Network activity on NIC 2 when flashing
NIC 1 LED Network activity on NIC 1 when flashing
6
7
8
Management Port 1 Network Interface Card 2
POWER-ON SELF-TEST BEEP CODES
48
CAUTION & WARNINGS
4
6
8
5
7
HDD LED Hard drive activity when flashing
Power LED Power is supplied when illuminated
Reset Button Press to reboot the server
Power Button Apply or remove power to the server
Information LED
Status Description
SOLID System overheat
FLASH (1Hz) Fan failure
FLASH (.25Hz) Power supply failure
SOLID Local unit identification (UID) activated
FLASH Remote unit identification (UID) activated
2
Stateless PN: LX-SM4x100G-4228-QRG rev 1.2

LUXON SERVER TO SWITCH WIRING
15 17 19 21 23 25 27 29 31 16 18 20 22 24 26 28 30 32
NC1_P1
Server
8
Server 9
Server 10
Server 11
Server 12
Switches
Additional expansion ports for Servers
or Network Connections (optional)
Interface
Card 2
Interface
Card 1
Switch to switch
connectivity
Open Ports for
Network Connections
YELLOW SWITCH
GREEN SWITCH
NC2_P1
NC1_P2
NC2_P2
15 17 19 21 23 25 27 29 31 16 18 20 22 24 26 28 30 32
IMPORTANT INFORMATION
QSFP28 CABLE
Y7 Y9 Y8 Y10
Y1
Y2
Y3
Y4
Y5
Y6
Y7
Y8
CONNECT SAME LETTER/NUMBER
•For QUICK REFERENCE GUIDE &
INSTALLATION GUIDE: www.stateless.net/install
•For Stateless support,
CONFIGURATION & USER GUIDE & other product info: www.stateless.net/support email: [email protected] call: 1-844-697-8339 or 1-720-649-4101
LUXON SERVER TO SWITCH WIRING
1 3 5 7 9 11 13 2 4 6 8 10 12 14
Server 1
Server 2
Server 3
Server 4
Server 5
Server 6
Server 7
Server
8
Additional expansion ports for Servers
or Network Connections (optional)
Network
Interface
Network
Interface
Core cluster
Server connections
YELLOW SWITCH
GREEN SWITCH
SERVER 1
1 3 5 7 9 11 13 2 4 6 8 10 12 14
IMPORTANT
ONLY USE STATELESS SUPPLIED QSFP28 CABLES FOR SERVER TO SWITCH CONNECTIONS
QSFP28 CABLE
QSFP28 CABLE
QSFP28 CABLE
GREEN SWITCH
G1 G3 G5 G7 G9 G2 G4 G6 G8 G10
YELLOW SWITCH
Y1 Y3 Y5 Y2 Y4 Y6
G1
G2
SERVER 1 NIC #1
NIC #2
G3
G4
SERVER 2 NIC #1
NIC #2
G5
G6
SERVER 3 NIC #1
NIC #2
G7
G8
SERVER 4 NIC #1
NIC #2
QSFP28 CABLES –
CONNECT SAME LETTER/NUMBER