STEAMONE H3S User manual

1
Garment Steamer
User Guide
H3S
Thank you for choosing this SteamOne product.
Please read this manual in its entirety before operating this appliance.
Keep this user guide in a safe place for future reference.
EN

2

3
TABLE OF CONTENTS
English Version ………………..………………………………………….……………..…….1
Safety Instructions………………………………………………………………………………….
Unpacking…………………………………………………………………………………………….6
Garment steamer H3S Overview……………………………………………….……..6
Before Use………………………………………………………………………………………………7
Garment steamer assembly……………………………………………………..………7
Pole assembly………………………………………………………..…………..…7
Locking the pole……………………………………………………………………7
Hose & Steam head assembly…………………………………………………7
Filling the water tank………………………………………………………………….….8
Use………………………………………………………………………………………………………9
Start…………………………………………………………………………………………..…9
Proper use………...……………………………………………………………………....10
Accessories………………………………………………………………………………….11
Trouser stretcher…………………………………………………………………11
Fabric brush & Creasing tool…………………………………………………12
After use………………………………………………………………………………………………13
Transport……………………………………………………………………………………………..13
Maintenance………………………………………………………………………………………….13
Troubleshooting…………………………………………………………………………………..15
Circuit diagram……………………………………………………………………………………..16
Models & Specifications………………………………………………………………………….16
Warranty………………………………..…………………………………………………………….17
French version …………………………………………………………………….…….……21
Spanish version ……………….……………………………………..……………………… 1

4
SAFETY INSTRUCTIONS
This product is listed by U . Representative samples of this product have been
evaluated by U and meet applicable safety standards.
The voltage of your electrical installation must correspond to that
of the appliance (120V). Connecting to the wrong voltage may
cause irreversible damage to the appliance and will invalidate the
guarantee.
ALWAYS FOLLOW THESE IMPORTANT SAFETY
INSTRUCTIONS BEFORE USING:
-Do not use this appliance for purposes other than what it was intended for.
-To reduce the risk of burns from hot water or steam, always hold the steam
head away from your body during operation.
-To avoid electric shock, never immerse the appliance in water or any other liquid.
-Always turn the appliance «OFF» before plugging it in to, or removing it from the
outlet. Grasp the plug and pull to remove it from the outlet; never pull on the
cord. Do not operate the appliance if the power cord is damaged.
-Disconnect the appliance from the electrical outlet when filling the water tank,
emptying or when not in use. Fill only the water tank with water; do not pour
directly into the water reservoir.
-Never point the steam head at people or animals, or steam the garment while
wearing.
-Use caution when using the appliance near children; never leave children
unattended near the appliance.
-et the appliance cool completely before storage and do not allow the power
cord to touch hot surfaces.
-This appliance has a polarized plug and will fit into a polarized outlet only one
way. If the plug does not fit in to the outlet, reverse the plug and try again. To
minimize the risk of electric shock do not force the plug in to the outlet; do not
alter the plug in any way. If it does not fit, try another outlet or contact a
qualified electrician.
-Do not operate the appliance if it has been dropped or damaged.
-To avoid the risk of injury, fire or electric shock, do not attempt to disassemble
or repair the appliance; take it to a qualified service center for repair.
-Use caution when emptying the water tank after use; water in the tank may be
hot. Do not touch metal parts until the unit has cooled to avoid the risk of burns;
use caution when changing attachments, they may be hot or contain hot water.
-Always keep the hose and nozzle elevated above the water tank.

-
Steam in an up and down vertical motion. Using the steamer in a horizontal
position or tilting it back may result in hot water discharge.
-
Always hang the steam head on the head support/ho
head on the floor, furniture or lay it on the power cord while it is hot or plugged
in as this may result in fire or electric shock.
-
Never drop or insert objects into the hose or any of the openings.
-
The use of accessories and attachments other than those provided by SteamOne
is not recommended and may result in fire, electric shock or personal injury.
-
This unit is for indoor use only.
-
Do not cut or attempt to extend the steaming hose.
-To prevent
overheating of the appliance, please be sure that the telescopic rod is
extended to its highest position before hanging clothes on the garment hook for
steaming.
-
Do not allow the steamer to run dry.
SPECIAL INSTRUCTIONS
-To avoid a c
ircuit overload, do not operate
the same circuit.
-
If necessary, use an extension cord specifically designed for appliances, leeser
cords may overheat.
SAVE THESE INSTRUCTIONS
Environmental
Responsibility
- Your
appliance contains materials that can be recovered or
recycled.
-
When disposing of it, take it to a recycling center or approved
service center.
Steam in an up and down vertical motion. Using the steamer in a horizontal
position or tilting it back may result in hot water discharge.
Always hang the steam head on the head support/ho
ok. Never place the steam
head on the floor, furniture or lay it on the power cord while it is hot or plugged
in as this may result in fire or electric shock.
Never drop or insert objects into the hose or any of the openings.
The use of accessories and attachments other than those provided by SteamOne
is not recommended and may result in fire, electric shock or personal injury.
This unit is for indoor use only.
Do not cut or attempt to extend the steaming hose.
overheating of the appliance, please be sure that the telescopic rod is
extended to its highest position before hanging clothes on the garment hook for
Do not allow the steamer to run dry.
SPECIAL INSTRUCTIONS
:
ircuit overload, do not operate
another high wattage
If necessary, use an extension cord specifically designed for appliances, leeser
cords may overheat.
SAVE THESE INSTRUCTIONS
:
Responsibility
appliance contains materials that can be recovered or
recycled.
When disposing of it, take it to a recycling center or approved
service center.
5
Steam in an up and down vertical motion. Using the steamer in a horizontal
ok. Never place the steam
head on the floor, furniture or lay it on the power cord while it is hot or plugged
Never drop or insert objects into the hose or any of the openings.
The use of accessories and attachments other than those provided by SteamOne
is not recommended and may result in fire, electric shock or personal injury.
overheating of the appliance, please be sure that the telescopic rod is
extended to its highest position before hanging clothes on the garment hook for
another high wattage
appliance on
If necessary, use an extension cord specifically designed for appliances, leeser
appliance contains materials that can be recovered or
When disposing of it, take it to a recycling center or approved

6
Unpacking
As you unpack your garment steamer, check to make sure that all items shown below
are included.
If anything is missing, contact Steamone at [e-mail]
Garment Steamer H3S Overview:
Description:
a Base k Folding Hanger
b ON/OFF Switch & Power Selection Dial l Trouser Stretcher
c Removable Water Tank m Head Support & Hook
d Pole Fastening ock n Fabric Brush & Creasing Tool
e Telescopic Pole
f Pole Fastening Screw
g Handle
h Steam Head
i Hose
j Hose Connector
fig.1
fig.2

7
Locking the pole:
1. Adjust the pole to its maximum height by sliding it upwards
then tightening up the three screws. (fig.6)
2. Insert vertically the hanger into the hook until it is firmly
fixed. (fig.7)
3. Place the head support/hook on the top of the pole and push
down to secure. (fig.7)
fig.6
fig.7
fig.8 fig.9
fig.3
fig.6
fig.5
Before Use
Garment steamer assembly
Hose & Steam head assembly:
1. Push the hose connector into the base until
resistance is felt. ock the connector by turning
clockwise. (fig.8 & fig.9)
2. Hang the steam head on the head
support/hook. (fig.1)
Pole assembly:
1. Place the base on the floor and remove the
water tank. (fig.3)
2. Unscrew the fastening lock from the base of
the steamer. (fig.4)
3. Insert the pole and tighten the pole’s fastening
lock by turning in a clockwise direction until
the fastener is securely in place. (fig.5)
fig.

8
fig.11
fig.13
fig.10
fig.12
Lift the water tank to make
sure there is water in the
reservoir. (fig.13)
After checking the reservoir,
replace the water tank on
the base.
Filling the water tank
Never use water that contains additives (starch, perfume,
aromatic substances, softener...) in the steamer. Additives can
affect the properties of steam, corrode internal parts and lead to
the formation of deposits.
Always check to be sure that the water tank is full before using
your garment steamer.
1. Ensure that the steamer is unplugged. Remove the
water tank from the base of the appliance by
pulling the handle upwards. (fig.10)
2. Unscrew the cap located at the bottom of the tank
and fill with water. (fig.11)
3. Replace the cap and place the water tank back on
to the base. (fig.12)
The steamer can be used with tap water. If
the water in your area is hard, Steamone
recommends you that use distilled or
demineralized water to reduce scaling.

9
fig.1
fig.15
fig.16-a fig.16-b
Use
Start
Never steam a garment while it is being worn. The hose and
steam head may become hot during use. This is perfectly normal.
Be careful to avoid contact with the steam head to avoid burns.
Operate the steamer on a flat surface clear of materials that may
obstruct openings at the base of the steamer.
-
Put garment onto the
folding hanger. (fig.16-a)
-
For quick steaming, you
can also use your own hanger on
the hook. (fig.16-b)
- If necessary, expand the pole to the desired height by
unlocking it, pulling it gently and locking it again.
-Plug in the power cord and turn on the power button.
The steamer is operating.(fig.14)
-Depending on the model, the amount of steam can be
adjusted by selecting the setting using the dial located
on the steamer base.
-The unit will produce steam in 60 seconds at maximum
wattage.
Steamone recommends that you wait 2
minutes to reduce condensation on the steam head
and get the best performance from your steamer.
(fig.15)

10
fig.17
fig.19
fig.20 fig.21
fig.18
Proper Use
Grasp the steam head with the steam vents pointing away from you.
-Start steaming by touching material lightly with steaming head and moving in
an up/down vertical motion.
-The steam head must be in contact with the garment. (fig.17)
-The garment must be stretched while steaming.
-You can use the trouser stretcher (fig.22 –page.11) or simply use your free
hand to stretch the garment. (fig.19)
-Always steam in a vertical position. (fig.20)
-Never try to steam the garment in a horizontal position. (fig.21)

11
fig.22
During use, the hose may make a gurgling noise. This is a
normal occurrence due to condensation. If you hear the gurgling
noise, hold the hose up to direct the condensation back into the
appliance.
Accessories
Before using the accessories, please read the instructions below.
Trouser stretcher:
-Adjust the trouser stretcher to the
correct height by sliding it upwards then
locking the clip on the stretcher.
-The trouser stretcher will help you to
anchor the garment (T-shirt or trouser)
for better performance.
(fig.22)
Tips for better performances with your garment steamer
•We recommend checking the garment care label for manufacturer
recommendations before steaming. We also recommend testing the
effect on the garment on an unobtrusive area such as an inner seam.
•Button up the shirt’s collar to prevent from slipping on the hanger
during steaming.
•Heavy fabrics may need to be steamed longer.
•If you are using the steam head at a position close to the ground, raise
the hose frequently in order to avoid the formation of condensation. A
gurgling noise may be heard if the flexible pipe is pinched.
•If no steam is produced, if a gurgling sound is heard or if water is
dripping through the holes of the steam head, raise the steam
hose occasionally to remove condensation inside.
•Use caution to avoid burns.

12
-
Fabric Brush Use
:
The fabric brush can pick up the lint on
your garment. It can also be extremely
effective on sofas, bedding, curtains,
stuffed animals, rugs and carpets.
1. Gently brush the area to be steamed with
the grain or nap of the fabric.
-Creasing Tool Use:
1. Push on the handle to open the creasing
tool. (fig.24)
2. Place the garment between the creasing
tool and steam head. (fig.25)
3. Release the handle of the creasing tool
and starting at the top of the garment,
move the creasing tool in a downward
motion. (fig.25)
fig.2
fig.23
fig.25
Fabric Brush & Creasing tool:
Be sure unit is unplugged and completely cool before attaching the
fabric brush & creasing tool.
-The fabric brush & creasing tool is a two-in-one product.
-Align the slot on the back of the fabric brush with the clip on
the bottom of the steam head and gently slide the brush up on
to the face of the steam head. (fig.23)
Remove the fabric brush & creasing tool once unit is unplugged
and completely cool. Remove it by gently pulling down on the
handle of the fabric brush & creasing tool until it comes off of the
steam head.

13
After use
Never touch the steam head until it has cooled down completely.
.
-After using the garment steamer, switch the power off. The power indicator
light will go off, and you can then unplug the device.
-Hang the steam head in an upright position on the hook when not in use. (fig.1)
-Wrap the cord around the power cord storage area under the base of the
steamer.
-Always empty the water tank before storage.
-Do not carry the steamer by the water tank handle, this will remove the tank
and the unit will fall to the floor.
Transport
Always make sure the pole is firmly attached to the base unit
before lifting up the device (see assembly instructions).
-Your device has four wheels for ease of transport. Grasp the pole and pull gently
to move the device.
-You can also lift up the device in order to move it, again holding the device at the
base of the pole.
Maintenance
It’s preferable to use distilled or demineralized water to
reduce scaling.
-To maintain maximum performance, your steamer must be descaled
occasionally. The time between descaling operations depends on the quality of
the water and the frequency with which you use the appliance. On average, the
appliance must be descaled after 30 hours of use.
Ensure that the appliance has cooled down completely (2 hours
minimum).

14
fig.26
fig.27
fig.28
fig.29
Don’t fill the boiler by the steam head holes! Never immerse the
steam head in water.
Useful steps for maintenance:
1. Unplug the unit and remove the steam hose from
main unit. Collapse the telescopic poles.
2. ay the base on its right side. Unscrew and
remove the drain plug. (fig.26)
3. Make sure the base is above a water container.
Fill the water tank with tap water, replace the
water tank cap and put the water tank back on
the base.(fig.27)
4. The water will flow out with the calcium residue.
(fig.28)
5. Maintenance is complete.(fig.29)
6. Replace the drain plug.

15
Troubleshooting
Problem Possible Cause Solution
There is no steam.
The appliance is
not turned on.
Be sure the appliance is
plugged in correctly. Next,
press the power button, the
power indicator light will come
on.
There is an
obstruction in the
hose.
Check the hose to be sure that
there is nothing in it and that
it is not damaged, twisted or
bent in any way.
The water tank is
empty.
Turn off and unplug the
appliance; fill the water tank
with water.
ow steam flow.
Scale build-up. Descale the appliance using
the instructions above.
There is an
obstruction in the
hose.
Check the hose to be sure that
there is nothing in it and that
it is not damaged, twisted or
bent in any way.
Water running from the steam
head.
Condensation in
the hose.
Hold the hose vertically to
allow the water to run back in
to the appliance. Do not use
the steam head in a horizontal
position.
The steamer takes a long time to
heat up. Scale build-up. Descale the appliance using the instructions above.
Calcium particles are coming out
of the steam head. Scale build-up. Descale the appliance using the instructions above.
0
If you cannot resolve the problem using the steps above, please contact us by email
or phone.
Tel: [phone]
Email: [e-mail]
Website: www.steam-one.com

16
Circuit Diagram
Models & Specifications
Model Voltage Frequency
Power
max
Water tank
capacity
Steam
Output
Net
weight
Gross
weight
Measures
H3S 120 V 60 Hz 1500W 1.1 40g/min 4.6 kg 5.2 kg 44x29x34 cm
Packing list
Main machine
1 set
Folding hanger
1 set
Telescopic Pole
1 set
Trouser stretcher
1 set
Hose
1 set
Fabric Brush &
Creasing tool
1 set
Head support/Hook
1 set
User Guide
1 set

17
Warranty
Warranty: United States of America and Canada
SteamOne warranty
This product is covered during the warranty period by SteamOne (contact details
page 18) against any manufacturing defect. The warranty is valid for 1 year from
the date of purchase and in the country specified (United States of America and
Canada).
This SteamOne warranty is in addition to your consumer rights.
All repair costs for a product recognized as having a defect are covered by the
SteamOne warranty, in order to return it to a state of compliance with its original
specifications, either through repair, or possible replacement, of the defective parts.
SteamOne may decide to offer a replacement product instead of repairing the
defective one, depending on the situation.
SteamOne’s obligations defined under the terms of this warranty are limited
exclusively to repair or replacement, as stipulated above.
Warranty terms and exclusions
- The SteamOne warranty is only applicable in the United States of America and
Canada during the defined period.
- The SteamOne warranty covers exclusively products purchased within the territory
of the United States of America or Canada and used for domestic purposes within
one of these territories.
- In case of use in a country other than the country in which the product was
purchased:
- The warranty period is that of the country of use of the product, even if the
warranty period in the country of purchase is different.
- The SteamOne warranty is only valid if local standards (voltage, electrical
frequency, type of electric socket and all other local specifications) are compatible
with the product.
- The application of the SteamOne warranty may take longer if the model in
question is not marketed in the country of use.
- If the product covered by the warranty cannot be repaired in the country of
use, the product may be replaced by an equivalent product or by another product of
the same value wherever possible.
- The SteamOne warranty is only valid upon presentation of proof of purchase and
the warranty card (page 19), duly completed. The defective product must be either
sent by registered mail to SteamOne, suitably packaged, or delivered directly to
SteamOne. SteamOne’s details in the United States of America or Canada are
provided in page 18.
- SteamOne is under no obligation to repair or replace a product that is not
accompanied by proof of purchase and the warranty card.
- Damage caused by incorrect use, non-compliance with the instruction and
maintenance manual or use of an electrical power supply that is not compatible with
that specified in the manual or on the product is not covered by the SteamOne
warranty.
- Nor does the SteamOne warranty cover damage that is the result of negligence or
unauthorized repair or modification of the product.
- Normal wear and tear of the product, maintenance or replacement of certain parts
are not included under the terms of the SteamOne warranty.
- The SteamOne warranty is not applicable in the following cases:
- Use of unsuitable water or water that contains additives (such as starch,
perfumes, aromatic substances, softeners…).
- Entry of water, dust or foreign bodies in the product.
- Scaling (it is essential that you follow the maintenance instructions
described in this instruction manual).

18
- Damage due to overload or impact.
- Damage or accidents linked to fire, flood, lightning…
- Use in a workplace or professional use.
- Incorrect use of the device.
- The warranty is not applicable in case of problems linked to packaging or transport
of the product during shipping by its owner.
Consumer rights
The SteamOne warranty does not affect the legal rights that consumers enjoy locally
or the legal rights towards distributors from whom the product was purchased. The
rights granted by this warranty are specific and do not interfere with other special
rights (depending on the country, state, province…), which the consumer may also
enjoy. The consumer may, by his own means, exercise these rights.
Replaceable parts
Accessories or other parts that can be replaced directly by the user can be
purchased locally, if available (contact details page 18).
STEAMONE CONTACT WARRANTY UNITED STATES OF AMERICA AND CANADA
Address Email Telephone Warranty
period
SteamOne – QB Products
1275 Karl Court
Wauconda, I . 60084
USA
steamonein[email protected]
800-323-6856
1 year

19
Warranty Card
STEAMONE WARRANTY CARD
Purchasing Date:
Client
Name/Company
Name:
Phone
Address
E-mail
Purchasing City
Purchasing Country
Machine Model
Machine Number
Record

20