stilum Training barrel User manual

State: 28.01.2021 p. 1
Mounting instructions for „Training barrel“
Item-No. 55 1008 401
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved.
Diagram 1: Overall view of the tness equipment

State: 28.01.2021 p. 2
Mounting instructions for „Training barrel“
Item-No. 55 1008 401
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved.
800 800
400
2060
410 410
700
1030
150
800
2300
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
Trainingstonne (150)
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
1:20
A3
Name
Name
Fundamentplan
2013-00-00
Maßstab
Schramm 18.08.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
concrete
gewachsenes Erdreich
natural ground
Legende
stoßdämpfender Boden
shock-absorbing floor
SI 19.01.21 stoßdämpfender Boden A
DatumÄnderungRev
Diagram 2: Foundation plan
1. Select the tness equipment location in consideration of the required movement
area (see diagram 3). Movement areas may overlap, exercise areas must not be
overlapped.
2. Select the postition of the instruction sheet.
Attention: Because of the risk of injury, the instruction sheet has to be arranged
outside of the movement area.
3. Carry out excavation work for the foundations as shown in diagram 2.
After excavation compress the foundation oor.
Note: The tness equipment is is installed at ground level. Pay attention to items
marked „ground level“ at the tness equipment!
4. Carry out excavation work for the instruction sheet foundation as shown in diagram
4. After excavation compress the foundation oor.
5. Set up the concrete foundations according to diagram 2 and 4 with central, hori-
zontal reinforcement.
6. After a setting period of 10 – 14 days, depending on weather conditions and found-
ation size, ll up and compress the holes between the foundation and the foundati-
on hole with excavation. Clean the foundation surface.
7. Place the barrel at the center of the foundation and align the bow around it (see
diagram 2). Drill holes into all foundations and screw the base plates to the founda-
tions with the included heavy-duty dowels.
8. Place the instruction sheet as well on the foundation and screw it onto the foundati-
on with the included heavy-duty dowels.
NOTE: We suggest to align the instruction sheet in such a way that the instructions
can be read while using the tness equipment.
ground level
concrete
foundation
Reinforcement plan: Concrete foundation with reinforcement
Foundation: BSt 500S
Stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C20/25

State: 28.01.2021 p. 3
Mounting instructions for „Training barrel“
Item-No. 55 1008 401
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved.
9. Cover the movement area with fall protection according to the required drop height
in accordance with EN 16630.
Critical drop height: 500 mm
Recommended surface material: grass, synth. impact protection.
With a smaller installation depth (special edition) we recommend synthetic impact
protection. In this case, make sure that protruding parts (e.g. screws, gusset pla-
tes) are covered with appropriate fall protection.
10. Do not allow to use the equipment before the installation has been nished
Attention: If the tness equipment has been incompletely installed or partly dismantled
when carrying out maintenance and repair work, this may lead to particular risks of
injury for the user. For this reason, make clearly visible that the equipment shall not be
used in such cases.
NOTE: Fitness equipment, which contain components made of stainless steel should
not come with „normal“ steel parts in contact. Those steel parts may rub o󰀨 and leave
small steel particles in combination with moisture brown rust stains.
If such corrosion occur on stainless steel parts, they are ne to remove with an abrasi-
ve (240 grit).
Please take care when transporting and setting up the fact that the components are
made of stainless steel with no „normal“ steel parts in contact.
In order to preserve a good visual appearance of your stilum tness equipment over a
long period one should take care of maintenance of the stainless surface even despite
of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequently cleaned
from dirt and deposits due to air pollution and dirt caused by the atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid cleaner (e.g.
on phosphoric acid) and rinse o󰀨 with clear water after a short application time.During
cleaning with mild abrasive components, only wipe over stainless steel surface in poli-
shing direction.
Diagram: Top view
4000
2700
1000
1000
2200
2000
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
Fitnesstonne (150)
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:20
A3
Gewicht
Name
Name
Draufsicht
2013-00-00
Maßstab
Behnke 20.07.16
A Übungsraum hinzu 20.01.21 SI
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
movement area exercise area

State: 28.01.2021 p. 4
Mounting instructions for „Training barrel“
Item-No. 55 1008 401
© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved.
Diagram 4: Foundation plan of the instruction sheet
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on cars)
or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g. ethyl alcohol,
isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the surface
again.
Do not use any chlorid or hydrochloric containing cleaning products nor scouring
powder, bleaching - or silver polish cleaner. Cleaning intervals depend on type and
degree of soiling as well as on demands made on optical characteristics. Therefore
cleaning is advisable at intervals of six to twelve months – whereby in the case of
strong soiling it is appropriate to clean the tness equipment at intervals of three to
six months.
General Information DIN 16630:2015-06_4.1:
DIN EN 1176 species that tness equipment should not be installed in the immedi-
ate vicinity of children’s playground equipment. In cases where they are erected in
playgrounds or similar establishments near children’s playground equipment, they
must be separated by adequate distance, fencing or other structural means from the
general play zone.
Movement area DIN 16630:2015-06_4.3.14.4
The free space allowed as movement area must be a minimum of 2.2m. The mo-
vement area must be clear of fences, and observers should not wait in this space.
The space should be free of all objects that the user could fall on and be injured.
E.g. injuries could be caused by posts that are not ush with adjacent parts or by
protruding footings. In cases where the equipment has a forced movement, the free
area must be extended about 0.5m. Where tness units are installed on or adjacent
to a wall which is at least as high as the exercise space, the movement area may be
reduced. Movement areas of adjacent equipment may overlap except for equipment
with forced movement.
220
300
300
150 1210
AA
SCHNITT A-A
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
Instruktionstafel klein
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
1:10
A3
Name
Name
Fundamentplan
2203-00-00
Maßstab
Simonis 09.08.18
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
concrete
gewachsenes Erdreich
natural ground
Legende
stoßdämpfender Boden
shock-absorbing floor
ES 09.12.20 beliebiger Boden A
DatumÄnderungRev
beliebiger Boden
optional floor