Stirling STR-WD106W User manual

Washer Dryer Combo
10 kg Washer & 6 kg Dryer
INSTRUCTION MANUAL
Model Number STR-WD106W
AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support

2AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
Welcome
Congratulations on choosing to buy a STIRLING®product.
All products brought to you by STIRLING®are manufactured to the highest
standards of performance and safety and, as part of our philosophy of customer
service and satisfaction, are backed by our comprehensive 3 Year Warranty.
We hope you will enjoy using your purchase for many years to come.

3
AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
Contents
0202 WelcomeWelcome
0404 Warranty DetailsWarranty Details
0505 General Safety InstructionsGeneral Safety Instructions
1010 UnpackingUnpacking
1111 Product OverviewProduct Overview
1313 InstallationInstallation
1919 InstructionsInstructions
2929 FAQs and Troubleshooting GuideFAQs and Troubleshooting Guide
3232 Other Useful InformationOther Useful Information
3939 Repair and Refurbished Goods or Parts NoticeRepair and Refurbished Goods or Parts Notice

4AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
Washer Dryer Combo (10 kg Washer & 6 kg Dryer)
Warranty Details
The product is guaranteed to be free from defects in workmanship and
parts for a period of 36 months from the date of purchase. Defects that
occur within this warranty period, under normal use and care, will be
repaired, replaced or refunded at our discretion. The benefits conferred by
this warranty are in addition to all rights and remedies in respect of the
product that the consumer has under the Competition and Consumer Act
2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and to compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION

5
AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
General Safety Instructions
Electrical safety and cord handling
• Voltage: Before connecting and turning on the appliance, ensure the electrical
voltage and circuit frequency correspond to those indicated on the appliance rating
label.
• Separate circuit: We strongly recommend you connect the appliance to a sepa-
rate circuit serving only this appliance. This provides the best performance and also
prevents overloading the house wiring circuits that could cause a fire hazard from
overheating.
• Power supply system: Make sure the power supply system (current, power voltage
and cabling) at your home can meet the normal loading requirements of electrical
appliances.
• WARNING! Only connect this washer dryer to a grounded (earthed) electrical outlet.
Do not overload the wall outlet, as overloading can result in fire or electric shock.
Insert the power plug securely.
• Protect from moisture: To avoid electric shock, fire and malfunction, do not install
this machine in a damp place. Do not pull out or insert the plug with wet hands or
bare feet. Do not expose the appliance, cord or plug to rain, moisture or other liquid.
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use, even if you are familiar with this type
of product. The safety precautions enclosed herein reduce the risk of fire, electric
shock and injury when correctly adhered to. Keep the manual in a safe place for
future reference, along with any warranty information and your purchase receipt. If
applicable, pass these instructions on to the next owner of the appliance.
Always follow basic safety precautions and accident prevention measures when
using an electrical appliance, including the following:
Pay particular attention to safety advice following the words DANGER, WARNING
and CAUTION. These words are used to alert you to a potential hazard that can
seriously injure you and others. The instructions will tell you how to reduce the
chance of injury and let you know what can happen if the instructions are not
followed.
DANGER means that failure to read this safety statement may result in severe
personal injury or death.
WARNING means that failure to read this safety statement may result in extensive
product damage or serious personal injury.
CAUTION means that failure to read this safety statement may result in minor or
moderate personal injury, property or equipment damage.

6AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
General Safety Instructions (Cont.)
• Power cord: Do not kink or damage the power cord, and position it out of the way so no
one steps on or places anything on the cord or against it.
• WARNING! Do not use the machine if the cord or plug is damaged to avoid an
electric shock, short circuit or fire. If the cord is damaged, it must be replaced by the
manufacturer’s service agent or a properly qualified person in order to avoid a hazard.
• CAUTION! Do not connect the appliance to the power supply using a power adaptor or
extension cord. Use of an extension cord does not guarantee the required safety.
• After use: Always unplug the appliance and turn off the water after use.
• Disconnect: Unplug the washer dryer from the power supply before cleaning, servicing,
maintenance or moving the appliance. Pull by the plug, not by the cord.
• Keep openings clear: Do not insert any objects into ventilation or similar openings.
• WARNING: The machine must not be supplied through an external switching device
such as a timer or remote control, or connected to a circuit that is regularly switched
on and off by a utility.
• RCD: Unless your home is already fitted with a residual current device (safety switch),
we recommend installing an RCD with a rated residual operating current not exceeding
30 mA to provide additional safety protection when using electrical appliances. See your
electrician for professional advice.
Installation
• WARNING! This appliance is extremely heavy. Transport with care! A team lift or
mechanical aid is required when moving the machine. Do not hold the washing machine
by the door or any other protruding part while lifting or transporting it.
• Damage: Do not operate the appliance after it malfunctions or has been dropped or
damaged. In case of damage, contact our after sales support centre for advice.
• Freestanding use only: This appliance is not to be built in.
• Do NOT install the appliance:
– outdoors or in a damp or wet environment (such as a bathroom)
– in areas where caustic or explosive gases are present
– near open flames or heat sources
– in a tight-fitting cabinet
– behind a lockable door, a sliding door or a door with a hinge on the opposite side to
that of the washer in such a way that a full opening of the washer door is restricted.
• Installation surface: This machine must be installed on a flat, even and stable ground to
avoid overturning during use or maintenance. Do not place it on carpet. If the machine
must be positioned on carpet, place a plastic mat underneath the machine and make
sure any ventilation openings in the base are not obstructed.
• Clearances: Ensure that there is a distance of at least 200 mm between the appliance
and any external heat sources, such as appliances containing heating elements.

7
AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
General Safety Instructions (Cont.)
• Installation: Make sure that all water and electrical connections are made by qualified
persons only, observing local safety regulations and following the installation instructions
in this manual (refer to “Installation”, pages 13–18). Do not use the appliance until it is
fully installed.
• Water connection: This machine has only one inlet for water (cold). Do not connect it
to the hot water supply. Connect the machine to the water mains using new hose sets.
Do not reuse old hose sets. The required water pressure is 0.02 MPa (min.) to 0.8 MPa
(max.).
• Drainage: Do not allow the water drained out of the appliance to accumulate.
• Ventilation openings: Do not cover any air inlet or exhaust openings. Exhaust air must
not be discharged into a flue which is used for exhausting fumes from appliances
burning gas or other fuels.
• Electrical connection: During installation, the power cord must not be excessively or
dangerously bent or flattened. The plug must be accessible after installation.
• Misuse: Improper installation or faulty use may result in the risk of fire, electric shock
and/or injury. We accept no liability for any eventual damages or injury caused by
improper installation, misuse or noncompliance with these instructions.
Usage conditions and restrictions
• Domestic use only: This appliance is intended for indoor household use only. It is NOT
suitable for commercial, industrial or trade use.
• Intended purpose: This washer dryer combo is designed for washing and/or drying
domestic quantities of textiles suitable for machine-washing and/or machine drying.
Do not use the machine for anything other than its intended purpose, and only use it as
described in this manual.
• No outdoor use: Do not operate the appliance outdoors.
• Usage restriction: This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Children: Supervise children to ensure they do not play with the appliance. Close
supervision is necessary when any appliance is used by or near children. Do not allow
children (or anyone else) to climb up and sit on top of the washing machine.
• Handling: Handle the washing machine with care. Do not place or store flammable items
or heavy objects on top of the machine. Do not sit on the top cover.
• Door handling: Handle the door with care. Do not lean against the machine door. Do
not let children swing from the door. Do not close the door with excessive force. If you
find it difficult to close the door, please check and ensure that the clothes are properly
loaded and well distributed.

8AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
General Safety Instructions (Cont.)
• Before loading the washer dryer:
– ensure no young child or pet has climbed into the drum
– ensure the water inlet hose is properly connected and the tap is turned on
– remove all objects from pockets such as lighters and matches
– check clothing for any hard, sharp objects such as coins, safety pins, paper clips, bra
wires, nails, screws or stones can cause extensive damage to the appliance and block
the pump. Any damage or malfunction resulting from foreign objects is not covered by
your warranty and may lead to expensive repairs.
• Suitability for washing: Only load suitable items into the washing machine. See page 28
for which materials are unsuitable for the washing machine.
• Suitability for tumble drying: Only load suitable items into the clothes dryer. See page
28 for which materials are unsuitable for the clothes dryer and may present a fire risk.
CAUTION!
• Do not use the tumble dryer function if industrial chemicals have been used for
cleaning.
• Do not dry unwashed items using tumble dryer function.
• Adequate ventilation has to be provided to avoid the backflow of gases into the room
from appliances burning other fuels, including open fires.
• Cool down: The final part of a clothes dryer cycle occurs without heat (cool down cycle)
to ensure that the items are left at a temperature that will not damage them.
WARNING: Never stop a tumble dryer before the end of the drying cycle unless all items
are removed quickly and spread out so the heat is dissipated.
• Door lock: In order to prevent burns, during the final part of the dry cycle the machine
will reduce the temperature of the drum. The time on the display will stop reducing during
this process. The door will unlock only after the temperature has reduced. Do not stop
the machine during this cooling period.
• Flammable, explosive or toxic substances must not be used as washing detergents
or for cleaning the machine.
• Capacity: Do not overload this machine; its maximum capacity is 10 kg (for a dry wash
load), or 6 kg for the dryer function. See page 23 for more information.
• Water intake: Never refill the water by hand during washing.
• After use: After the program is finished, wait until the drum has stopped spinning and
the door lock icon is no longer lit before opening the door. If water is still visible, do not
attempt to open the door. Do not add or remove clothes while the drum is spinning.
This symbol alerts you to take care as oil-affected items can ignite
spontaneously, especially when exposed to heat, such as in a clothes
dryer. The items become warm, causing an oxidation reaction in the
oil. Oxidation creates heat. If the heat cannot escape, the items can
become hot enough to catch fire. Piling, stacking or storing oil-affected
items can prevent heat from escaping and so create a fire hazard.

9
AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
General Safety Instructions (Cont.)
• Subsequent cycles: After turning off the power supply to the machine, wait at least
two minutes before turning it back on again.
• Disconnect the water and power supplies after use.
CAUTION: Hot!
• Parts of the appliance can become hot during use and retain heat for some time after
turning off. Do not touch hot surfaces! Keep the power cord away from hot parts. Do not
cover the appliance.
• During a hot wash, or the drying process, the door window may become hot. Do not
touch it, and ensure to keep children and pets away from the machine during operation.
• Be careful of burning when the machine drains hot washing water.
Cleaning and maintenance
• Disconnect: Before cleaning or carrying out maintenance, always unplug the appliance
from the power supply.
• CAUTION! After each wash, clean the door and the door seals and remove any
threads, lint or foreign objects. Also check the detergent drawer and clean out
detergent residues. Regularly clean the power plug to remove dust and dirt and avoid
contact failure. Cleaning and user maintenance shall not be carried out by children
without supervision. Do not spray the machine with water.
• CAUTION! Cleaning the inside of your machine regularly is particularly important if you
frequently use a cold wash cycle, especially if you also use a fabric softener. Liquid
detergents can cause detergent scum to build up around the outside of the drum,
which cold water will not remove and which can cause bacteria, unpleasant odours,
and eventually soiling of your wash load.
• Do not open the housing: The washing machine has no user-serviceable parts
contained within. Do not attempt to repair or dismantle it.
• Do not attempt to modify this product in any way. Doing so is dangerous and will void
your warranty.
• Service: Only have the appliance serviced by authorised service personnel. Service or
repairs carried out by inexperienced or unqualified persons may cause injury and/or
make more serious repairs to the appliance necessary.
• NOTE: While your washer dryer combo does not have a lint filter to maintain, excess lint
can collect in the drain pump. It is important to clean the drain pump every two months
to ensure optimal product performance and the longevity of your machine.
CAUTION!
The door will not unlock when the temperature inside the drum is above 53 °C, and/or
when the water is above a certain level.
For your safety, do not turn the program dial to the off position [ O ], open the machine and
access the washing while the machine is running, or when the power supply is cut off. The
water temperature may be high and it may scald you. The door will automatically unlock at
the end of a wash program when the temperature of the drum has cooled down.

10 AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
Unpacking
Unpacking the washing machine
CAUTION: EXTREMELY HEAVY!
A team lift or mechanical aid is required when moving this appliance.
Keep the washing machine as upright as possible during transportation.
• This product has been packaged to
protect it against transportation damage.
Remove all packaging materials from
around the appliance and inside the
drum, including the foam base (Fig. 1).
• Keep the original packaging carton and
materials in a safe place. It will help
prevent any damage if the product
needs to be transported in the future,
and you can use it to store the appliance
when it is not in use. In the event that the
packaging materials are to be disposed
of, please recycle them where possible.
• Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach and disposed of safely.
• Remove any tapes securing the power supply cord and drain hose and all accessory
parts from the drum.
• If you notice any water drops on the packaging bags or the door glass, do not be
alarmed. This is normal as the appliance is fully checked in the factory before it is
being packaged for transport.
Checking the package contents
• Check all parts of the package against the scope of delivery list on the following
pages and ensure you have received all items.
• Check the washer dryer for any damage from transportation. Unwind the power
cord to its full length and inspect it for damage. Do not use the appliance if the
appliance or its cord has been damaged or is not working properly. In case of
damage, or if anything is missing, please contact our after sales support centre for
advice on examination, repair or return of the damaged product.
• Read this manual to familiarise yourself with all the parts and operating principles
of the washing machine. Pay particular attention to the safety instructions on the
previous pages.
Fig. 1Fig. 1

11
AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
Product Overview
Scope of delivery
Front view
1 Program dial (knob)
2 Detergent drawer
3 Door
4 Door glass window
5 Service cover
6 Drain pump filter (behind the service cover)
7 Top cover
8 Control panel with LED display
9 Wash/spin drum (inside the door)
10 Housing
11 Door seal (inside the door)
12 Adjustable feet (4)
56
2
3
1
4
8
9
7
10
12
11

12 AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
Rear view
13 Power cord and plug
14 Transit bolts (4)
15 Back cover
16 Drain hose connection (drain hose included, but not shown here)
17 Cold water inlet valve
Product Overview (Cont.)
Accessories
18 Cold water supply (inlet) hose
19 Transit hole caps (4)
20 Drain hose support (elbow)
Documentation (not shown)
Instruction manual
Quick start guide
Warranty certificate
2019
18
NOTE: Due to continued product improvement, images and illustrations in this manual
may vary slightly from the product purchased. All images in this manual are for
reference purposes only. Parts are not necessarily pictured to scale.

13
AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
Installation
Removing the transit boltsRemoving the transit bolts
WARNING!
Before installing the washer dryer, you must remove the transit bolts from the back of
the housing and cover the holes with the transit hole caps provided.
The bolts hold the drum in place during transport but they must be removed
before use so the drum can move during the wash and spin cycles. Leaving the
bolts installed will result in strong shock and noise during use, malfunction and
serious damage to the machine.
• Dismantle the four transit bolts from the
back of the machine using an appropriate
tool (Fig. 2).
• Keep the bolts in a safe place; you will
need them again when moving the
appliance, if you move house, for example.
• Cover the holes with the supplied caps.
Selecting the location
Before installing the appliance, make sure the
location meets the following requirements:
• A concrete floor is the most suitable
installation surface for a washer dryer,
being far less prone to vibration during the
spin cycle than wooden floorboards or a
carpeted surface.
• The machine must be level and securely
positioned. It must be protected from
direct sunlight, water and weather.
• The distance between the machine and
wall must be more than 10 cm (Fig. 3).
• To avoid vibrations during spinning, the
machine should not be installed on soft
floor coverings. If the appliance must be
placed on a carpeted surface, place a
plastic mat underneath and ensure any
ventilation openings in the base are not
obstructed.
WARNING!
Stability is important to prevent the appliance from moving during operation.
Make sure that the machine does not stand on the power cord.
Fig. 3
Fig. 2

14 AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
Installation (Cont.)
Levelling the machine
Place the machine on solid, dry and level ground. The machine must stand perfectly
level on all four feet to ensure safe and proper operation. Incorrect installation may
cause vibrations and noise and may cause the machine to move about.
To determine whether levelling is necessary, place a spirit level on top of the washer
dryer and hold it upright against the housing to identify any inclinations. If the machine
needs levelling, proceed as follows (Fig. 4):
WARNING!
It is very important to level the washer dryer carefully, especially if your floor is
uneven. Failure to do so may result in the machine shaking and moving during the
spin cycle, or out-of-balance problems.
WARNING!
The lock nuts on all four feet must be screwed tightly against the housing, otherwise
the machine may vibrate noisily during operation.
• Loosen the lock nut with a spanner, turning it anticlockwise to loosen.
• Adjust the foot by hand until it makes close contact with the floor. Turn it
clockwise to lower the foot or anticlockwise to raise it.
• When the machine is level, use a spanner to turn the lock nut in a clockwise
direction to tighten.
Fig. 4

15
AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
Installing the drain hose
WARNING!
Do not kink or protract the drain hose.
Position the drain hose properly in order to prevent water spillage onto the floor
and potential damage.
Never immerse the end of the drain hose in water.
The drain hose is installed at the back of the machine. For drainage of the washing
water, you can install the other end of the hose two different ways: either directly into a
laundry sink or into a standpipe.
Drain hose connection into a sink (Fig. 5)
Installation (Cont.)
• If the spigot outlet has not been used before, remove any blanking plug that may
be in place.
• Push the drain hose onto the spigot and secure with a clip, if required.
• Ensure a loop is formed in the drain hose to prevent waste from the sink entering
the washer dryer.
• If required, the drain hose may be extended to a length of 4 m.
Fig. 5
Loop

16 AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
Installation (Cont.)
WARNING!
Never lay down the drain hose as water will be discharged.
Be sure the drain hose is properly routed so it will not kink or lift off the sink.
Leave the drain hose affixed to the back of the machine.
Drain hose connection into a standpipe (Fig. 7)
• Firstly, form a hook in the end of the drain hose using the
supplied drain hose elbow (Fig. 6).
• Place the drain hose into your standpipe, which should
have an internal diameter of approximately 30 mm, thus
ensuring there is an air break between the drain hose and
standpipe.
• When discharging into a standpipe, ensure that the drain
hose reaches at least 30 cm into the standpipe, and the top
of the standpipe is no more than 90 cm and no less than 60 cm above floor level
(Fig. 7).
FROST PROTECTION
Do not install the washer dryer in places where temperatures drop to below 0 °C.
The reliability of the electronic control unit may be impaired at temperatures below
freezing point, and the machine’s inlet valve and draining systems may get damaged
as frozen hoses may burst or split.
If temperatures drops to below 0 °C, transfer it to an area with a warmer ambient
temperature before use and ensure no residual water is frozen in hoses and pipes.
Fig. 6
“Elbow”
supplied
Fig. 7

17
AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
Connecting the water supply hose
WARNING!
To prevent leakage or water damage, make sure to follow the instructions in this
section when connecting the appliance to your water supply.
Do not kink, crush, modify or sever the water inlet hose.
• Connect the supplied cold water supply hose to an ordinary laundry tap with a 3/4”
thread (Fig. 8). Installation should comply with all requirements and regulations of
your local water and building authorities.
• Turn on the tap and check for leaks. In case of leakage, repeat the connection
steps above, or tighten the nut more firmly. If your water pressure is strong, close
the water tap completely, then open it slightly.
CAUTION!
When tightening the coupling nut, take care not to damage the water inlet valve
joint. Apply force evenly and do not twist the water inlet valve.
Use only the new (supplied) hose with your new appliance. Do not use a hose from
an existing machine, or one that has been used previously.
Installation (Cont.)
• When there is an inlet valve at the back of the machine, it must be connected to a
cold water supply. Follow the pictorial instructions below (Fig. 9) to complete the
connection.
inlet valve for cold water
inlet hose for cold water with a white nut
Fig. 9
Inlet valve for cold water
Inlet hose for cold water (with a white nut)
Fig. 8

18 AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
Electrical connection
Installation (Cont.)Installation (Cont.)
Power supply system
• Make sure the power supply system (current, power voltage and wire) at your home
can meet the normal loading requirements of electrical appliances. The electrical
voltage and circuit frequency are listed on the appliance rating label.
• WARNING! Only connect the washer dryer to a single, grounded (earthed) electrical
outlet. Do not overload the outlet, as overloading can result in fire or electric shock.
Insert the power plug securely. Do not use a power adaptor or extension cord.
Electrical installation advice
• To avoid electric shock, fire and malfunction, do not install this machine in a damp
place. Do not pull out or insert the plug with wet hands or bare feet. Do not expose
the appliance, cord or plug to rain, moisture or other liquid.
• Do not kink or damage the power cord, and position it out of the way so no one steps
on or places anything on the cord or against it.
• Ensure the washer dryer is unplugged from the power supply before installation. The
plug must be accessible after installation.
• CAUTION! Do not use a power adaptor or extension cord.
• Unless your home is already fitted with a residual current device (safety switch), we
recommend installing an RCD with a rated residual operating current not exceeding
30 mA to provide additional safety protection when using electrical appliances. See
your electrician for professional advice.
• All electrical connections must be made by qualified personnel, and all instructions in
this manual as well as local safety regulations must be observed.
WARNING! This appliance must be earthed.
In the event of a malfunction or breakdown, earthing will reduce the risk of an
electric shock by providing a path of least resistance for the electric current.
This appliance is equipped with a cord having an equipment-earthing conductor
and an earthing plug. The plug must be plugged into an appropriate outlet that is
installed and earthed in accordance with all local standards and requirements.
Do not modify the plug under any circumstances. If the plug does not fit your
outlet, consult a licensed electrician and have the outlet changed.

19
AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
Control Panel Silkscreen
XQG100-DT614VE
SY-XDT6QG100-002
SY-XDT6QG100-002
2 5 . 3
洪 柳
2017.10.19
10.0 /6.0kgkg
Rin s e+
文字
洗衣机为白色时，丝印颜色为
洗衣机为香槟金和银色时，丝印颜色为 70% 黑
白色
洗衣机为钛晶灰，丝印颜色为
3. �CTQ尺寸。
Wash & Dry 60 OFF
Spin
Refresh
Dry
Quick Dry
Quick
Synthetic
Rinse & Spin
Express Cotton
Mix 20˚
Anti-Allergy
Down
Bulky Items
Drum Clean
Standard Cotton
Control panel (Fig. 10)
Instructions
1 Program dial: Turn the program dial (knob) clockwise or anticlockwise to switch
on the machine and select the required wash program (see page 22 for details).
Once you press the Start/Pause button and the machine is running, the pro-
gram cannot be changed.
2 Start/Pause: Press this button to start a wash program or to pause it. The door
cannot be opened when the machine is paused.
3 Dry: Press this button to add a dry program, or alter the dry time. NOTE: All of
the available programs on this machine (except for Dry, Quick Dry, and Refresh)
are washing programs. In order to add a drying time to a cycle, press the Dry
button after selecting the desired wash program. Press repeatedly to change the
drying time (see page 22 for more information on the different cycles and drying
times).
4 Delay: Press and hold the Temp. and Dry buttons for 3 seconds to add a delay
time (1-24 hours).
5 Temp: Press this button to change a wash temperature (see page 22 for details).
6 Mute: Press and hold the Temp. button for 3 seconds to mute the prompt tone
and alert sound. Press and hold the Temp. button again to restore the sound.
7 Speed: Use this button to change a program’s default spin speed (see page 22
for details).
21
3
7
9
4
5
8
10
6

20 AUS
AFTER SALES SUPPORT
MODEL: STR-WD106W PRODUCT CODE: 707624 11/2021
1300 112 534
tempo.org/support
Instructions (Cont.)
8 Child lock
– To activate the child lock after the washing cycle has started, press and hold
the Rinse+ and Speed buttons simultaneously for 3 seconds. The child lock
icon will light up on the display, indicating that the control panel is locked
to prevent misuse by children. In an emergency you can power the machine off
by turning the dial to the [ O ] position.
– To cancel the child lock, press and hold the Rinse+ and Speed buttons for 3
seconds.
– You can only activate the child lock after the washing cycle has started. It will
release automatically after the washing program has finished.
9 Rinse+: Use this button to change the rinse times (see page 22 for the number
of rinses).
10 OFF [ O ] position
At the end of a program, turn the knob to the [ O ] position to switch the machine
off.
NOTE: While your washer dryer combo does not have a lint filter to maintain after
each wash, excess lint can collect in the drain pump. It is important to clean the
drain pump every two months to ensure optimal product performance and the
longevity of your machine (see page 36).
AUTOMATIC BALANCE CONTROL
The machine is fitted with a balance control device, which ensures the machine is
stable during the spin cycle. To protect the machine, it will cut in if the laundry is not
evenly distributed in the drum. The laundry is redistributed by reverse rotation of the
drum. This may happen several times before the unbalance disappears and normal
spinning can resume.
If after 15 minutes the laundry is still not evenly distributed in the drum, the machine
will not spin. In this case, please redistributed the load manually and reselect the spin
program.