STL M-430 User manual

HDMI Repeater
User Manual
Ver. 1.00
All brand names and trademarks are properties of their
respective owners.

MN8000100005 Page2
Features and Specification
Allows HDMI signal to be transmitted by long HDMI cable
Allows unlimited cascading
HDMI 1.3 compatible
Supports signal rate up to 2.5Gbps
HDCP compliant
Easy installation
Metal case
Package Contents
One HDMI Repeater
One Power Adapter (optional)
One User Manual
Mounting ears (optional)
Note: Contents may vary depending on country/market.

MN8000100005 Page3
Hardware Layout
Figure 1. Front Panel Layout
HDMI Input Port: Connect to a HDMI source with a HDMI
cable
Power Jack: Connect to the included power adapter (optional)
Power LED: The Power LED will be lit when the HDMI
Repeater is powered on

Figure 2. Rear Panel Layout
HDMI Output Port: Connect a HDMI display with a HDMI
cable
Hardware Installation
1. Connect the long HDMI cable from the source into the “HDMI
In” on the front of the HDMI Repeater. The HDMI Repeater is
placed next to your display to regenerate the HDMI cable.
2. Connect short HDMI cable from the “HDMI Out” connection in
the back of the HDMI Repeater to your display or projector.