Stompa Chair Bed 15620500321 - White User manual

Stompa Chair Bed
Dimensions
Width - 80.00 cm
Depth - 93.5/199.0 cm
Height - 25.5 cm
If you need help or have damaged or missing parts, call the : 0844 8008475Customers Helpline
Important - Please read these instructions fully before starting assembly
Factory code:
15620500321 - White
Assembly instructions - please keep for future reference
Issue 3 - 27/11/1064762051-2
26.0
80.2
93.5/203.3
Issue 1 07/10/11
T1005-02-NOR LV351-V6
T1005-02 - White
Batch nr:

Safe and Care Advice
Important - Please read these instructions fully before starting assembly
Glue safety - Take care when using glue, please follow the advice below
Check you have all the
components and tools listed on
page 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to lay out the parts before
starting.
Do not stand or put weight on
the product, this could cause damage.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Parts of the assembly will be
easier with 2 people.
We do not
recommend the
use of power
drills/drivers
,
for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Dispose all packaging
carefully and responsibly.
(GB) IMPORTANT, READ CAREFULLY - RETAIN FOR FUTURE REFERENCE
Only clean using a damp cloth
and mild detergent, do not use
bleach or abrasive cleaners.
From time to time check that
there are no loose screws on
this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
Skin contact: Remove
contamination by washing with
soap and water. This procedure
should also be followed prior to
eating and drinking.
Eye contact: Rinse immediately
with clean water for 15 minutes
and seek medical advice.
If swallowed: Seek medical
advice immediately.
Care and maintenance
Current legislation requires
that the bunkbed must be fitted
with a ladder or platform for the
upper bunk bed.
The bunk bed meets the european
EN 747-1:2007 standards for security
and durability.
This bed is designed to
use a mattress size 200 cm long
and 90 cm wide. The total
thickness must not exceed 16.1 cm
The label on the ladder side indicates
maximum height of mattress to be used
in this bed.
Mattress: Important: High beds and the upper
bed of a bunk are not suitable for
children under six years due to the risk
of injury from falls.
Do not use the bed if any structural
part is broken or missing.
Be aware that children can strangle
in items such as ropes, strings, cords,
harnesses and belts attached to or
hung on a bunk bed/high bed.
Children can become trapped
between the bed and the wall.
To avoid risk of serious injury the
distance between the
and the wall shall not exceed
75 mm or shall be more than 230 mm.
top safety
barrel
WARNING
3
4.

12
T1005-02 3/9
13
15
14
11
10
2
3
7
6
1
9
6
12
11 11
11
14 14
14
14
4
2
Right side x1
(93,5x26x1,9 cm)
1
Left side x1
(93,5x26x1,9 cm)
5
Suppo t ail x1
(96,4x9x2 cm)
3
Suppo t ail x1
(76,4x9x2 cm)
10
Leg x2
(13,1x5,5x5,5 cm)
9
Rea slat suppo t x1
(76x5,5x5,5 cm)
7
F ont panel x1
(76x25,6x1,9 cm)
8
F ont slat suppo t x1
(76,4x4,3x2,5 cm)
14
Long slat x5
(73x6,5x1,7 cm)
13
Connecting piece x1
(76x2,8x2,5 cm)
15
Connecting piece x1
(62,5x3x0,4 cm)
12
Sho t slat with stop x2
(68x6,5x2,3 cm)
11
Sho t slat x4
(68x6,5x1,7 cm)
6
Base x2
(62,4x38x0,6 cm)
4
Suppo t ail x1
(76,4x9x2 cm)

3
E
1
4
E
Tools needed (not supplied)
4mm
x2
40 min
GLUE
10x30B
F
M6x8x12x15
GLUE
T1005-02
x2
x4
C
E
x2
x2
D26
6,3x50
M6x40
x16
D
x1
x4
A 10x40 G 3,5x16 x14
H 3,5x40 x15
J 7x50 x5
K D15x18 x6
4mm
E 6,3x50 x2
A 10x40 x16
4/9
4
2x
A
A
2x
A 2x
A 2x
A 2x
10
A 2x
3
GLUE
5
2x
2x A
1
2

8
F
M6x40C
3 4
5
GLUE
C
7
x2
x26,3x50E
x410x30B D M6x8x12x15 x2
F D26 x2
G 3,5x16 x4
5/9
D
C
D
7
8
6
E
E
2
6
5
6
T1005-02
B
B
B
8
10
10
9
G
G
2x
F
2x
F
2x G
GLUE
GLUE
GLUE
B
4mm
2x

H 3,5x40
T1005-02
9
10
x63,5x40H
x6
11
J 7x50 x5
6x H
812
11
12
11
11
11
6/9
4mm
14
14
14
14
14
5x J
H
12
11
9
H
12
11
H
14
8
J
6x
11
12 13
11
H
11
12
11 12

H
HH
15
H
Chairbed
can be
fitted LH
or RH side
x10
K
3,5x16G
x6D15x18
T1005-0
H 3,5x40 x3
7/9
14
10x G
15
14
14
14
14
13
1
14
K
K
K
K
K
K
14
x G

Assembly Instructions
Customer Notice
Dear Customer,
Congratulations on the recent purchase of your furniture!
Customer Service:
For missing or spare parts requests please contact us Monday to Friday – 10am to 3pm in
one of the following ways:
Phone: [phone]
Email: [email protected]
Please inform: product, colour, where did you buy it, part no, quantity and
reason for request. We need your full name, address and telephone number.
Fax: Please complete the enclosed Service Form and fax to 0560 1132071
By post: Please complete the enclosed Service From and post to:
Nordika Design Ltd.
High Rigg
Panorama Drive
Ilkley, LS29 9RA
We will do our utmost to supply spare parts within 7-10 working days of receipt of
request.
Our quality control team has ensured a high quality product that we are sure you will be
pleased with. Any components produced willfrom solid wood contain knots and
may have surface defects which are a feature of a natural product.

Customer Service Form
Please return complete to Fax: [phone]
Name:
Address:
Contact No:
Date of purchase:
Place of purchase:
Product Name:
See assembly instructions:
Problem:
Parts Needed: Part No. Quantity
Please quote assembly
instruction or number
Description
e.g drawer base