Strand STRAND PLT Series User manual

1
QUICK START GUIDE
LENS TUBES
OVERVIEW
This document provides basic setup instructions and safety warnings for the following product(s):
ORDER
CODE DESCRIPTION
STRAND PLT SERIES
64010-002 PLT 10° lens tube black
64010-102 PLT 10° lens tube white
64010-003 PLT 14° lens tube black
64010-103 PLT 14° lens tube white
64010-004 PLT 19° lens tube black
64010-104 PLT 19° lens tube white
64010-005 PLT 26° lens tube black
64010-105 PLT 26° lens tube white
64010-006 PLT 36° lens tube black
64010-106 PLT 36° lens tube white
64010-001 PLT 5° lens tube black
64010-101 PLT 5° lens tube white
64010-007 PLT 50° lens tube black
64010-107 PLT 50° lens tube white
64010-008 PLT 70° lens tube black
64010-108 PLT 70° lens tube white
ORDER
CODE DESCRIPTION
STRAND SPX ZOOM SERIES
SPX2550LT 25°-50° zoomspot lens tube black
SPX1535LT 15°-35° zoomspot lens tube black
STRAND SPX FIXED SERIES
SPX14LT 14° fixed beam lens tube black
SPX19LT 19° fixed beam lens tube black
SPX26LT 26° fixed beam lens tube black
SPX36LT 36° fixed beam lens tube black
SPX50LT 50° fixed beam lens tube black
STRAND LENS HOLDERS/ADAPTERS
64010-012 PLT universal lens holder black
64010-112 PLT universal lens holder white
PLPF4ULTA Universal tube adapter black
CLEANING AND MAINTENANCE
1 Remove heavy particles with compressed air prior to cleaning with cloth and/or cleaning solution.
2 Use a clean, soft, lint-free cloth. Recommended to have one for wet cleaning and one for drying/polishing to prevent
streaking.
3 Always use a NON-AMMONIATED glass cleaner, isopropyl alcohol, or a mild soap and water solution.
4 Use caution to not continuously rub on lenses as damage may occur to coatings.
5 Polish with clean, dry cloth to prevent streaking.
6 Store lens tubes in plastic coverings to reduce dust/residue buildup.

2
QUICK START GUIDE
LENS TUBES
INSTALLATION
PLT LEN TUBES
To install or remove a PLT lens tube on the luminaire:
Step 1. Click the adapter into the luminaire.
Step 2. Insert the lens tube into the adapter. After acheiving the desired beam edge, tighten the locking bolt.
Step 3. To remove, perform process in reverse.

3
QUICK START GUIDE
LENS TUBES
SPX LEN TUBES
Fixed beam and zoom lens tubes are interchangeable.
To remove or install an SPX lens tube on the luminaire:
Step 1. Loosen (but do not remove) move lens knob(s) towards front of lens tube assembly.
Step 2. Lift lens tube assembly up and away from light engine assembly.
Step 3. To install, perform process in reverse.
Lens Tube Assembly
Lens Tube Lock
1
2

4
QUICK START GUIDE
LENS TUBES
©2021 Signify Holding. All rights reserved.
All trademarks are owned by Signify Holding or their respective owners. The
information provided herein is subject to change, without notice. Signify does
not give any representation or warranty as to the accuracy or completeness of
the information included herein and shall not be liable for any action in reliance
thereon. The information presented in this document is not intended as any
commercial offer and does not form part of any quotation or contract, unless
CUSTOMER SERVICE
If you have any questions regarding this product,
please contact Customer Service by phone at
[phone] or by email at entertainment.
[e-mail].
4
FOCUS
To focus the lens tube:
Step 1. Loosen the locking bolt located on one side of the adapter. Slide the lens tube forward or backward to
achieve the desired beam edge.
Step 2. Once the luminaire is focused, tighten the locking bolt.