Sunjoy L-BR004PST-6B User manual
Sunjoy L-BR004PST-6B Brioche Baker Accent Furniture-Rack
Owner’s Manual
IMPORTANT
Thank you very much for choosing Sunjoy Group.
Please take time to read these instructions thoroughly and follow each step carefully for safe and easy
operation. Keep this manual for future reference.
We would like to hear from you with any comments or suggestions. You can call us toll-free at
1-866-578-6569 from 8:00 a.m. EST to 8:00 p.m. PST. You can also send the email to
replacement part order form.
Cautions:
1. Repeated assembly can weaken the locking ability of the nuts. Periodically check all bolted connections
on your furniture to make sure they are tight and secure. Retain these instructions for future reference
2. Keep all children and pets away from assembly area. Children and pets should be supervised while
product is being assembled.
3. Do not over tighten any of the nuts as this may DAMAGE the threads. Tighten each nut firmly.
4. Ensure that the nuts are not cross-threaded, hand tighten before commencing.
5. Check all bolts for tightness before and during usage.
6. Always use on level ground, ensuring leg remains in contact with the ground.
7. When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; rinse
thoroughly and dry completely. Do not use strong detergent or abrasive cleaners, then store in a cool, dry
location away from sunlight.
Assembly Instructions:
Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish.
Inside this carton you will find enclosed hardware and parts listed above. Please check the contents of this
package to ensure you have received all of the required parts, and that there is no breakage.
Parts identification: For ease of identification, all parts are labeled to correspond to the Step number in which the
part is used
No Description Qty Image
A Top plate 1
B Top shelf 1
C Middle shelf 1
D Oblique stay bar 2
E Steel bar 2
F Large middle shelf 1
G Bottom plate 1
H Rack leg 2
IBottom shelf 1
J Bottom support 2
No Description Qty Image
L M8x50 bolt 7
M M6x50 bolt 3
N M6x35 bolt 10
O M6x15 bolt 10
P M6x15 bolt 8
Q M8 flat washer 7
R M8 spring washer 7
S M6 flat washer 25
T M6 spring washer 25
U M8 nut 7
V M6 nut 15
W M6-M8 wrench 2
X M6 wrench 1
Parts List Hardware Pack
O
T
S
G
M
V
T
S
G
A
E
P
N
TS
E
G
A
G
J
J
Fig2.1
Fig2.2
V
A
L
R
Q
U
G
Step 1: Attach Top Plate (A) to Bottom Plate (G)
with Bolt (L), Flat Washer (Q), Spring Washer
(R) and Nut (U) by Wrench LL.
Ste
p
1：Ste
p
2：
Step 2: Attach Steel Bar (E) to Top Plate (A) and Bottom Plate
(G) with 8pcs of Bolt (P) by using Wrench (X), as Fig.2.1
Attach Bottom Support (J) to Bottom Plate (G) with 4pcs Bolt
(N), Flat Washer (S), Spring Washer (T) and Nut (V) by
Wrench (W), as Fig 2.2
Ste
p
3：
Step 3: Attach Bottom Plate (G) to Bottom Panel
(I) with Bolt (M), Flat Washer (S), Spring Washer
(T) and Nut (V) by Wrench (W)
Ste
p
4：
Step 4: Attach Bottom Shelf (I) to Rock Leg (H)
with 4pcs Bolt (O), Flat Washer (S) and Spring
Washer (T) by Wrench (W)
T
S
O
Ste
p
5：Ste
p
6：
Step 5: Insert Large Middle Shelf (F) to Slot of Rack Leg (H),
connect Large Middle Shelf (F), Top Plate (A) and Bottom
Plate (G) together with 5pcs Bolt (L), Flat Washer (Q), Spring
Washer (R) and Nut (U), as Fig 5.1. Then attach Large Middle
Shelf (F) to Rack Leg (H) with 4pcs Bolt (O), Flat Washer (S)
and Spring Washer (T) by Wrench (W), as Fig 5.2
Step 6: Attach Middle Shelf (C) to Oblique Stay
Bar (D) with 2pcs Bolt (O), Flat Washer (S) and
Spring Washer (T) by Wrench (W)
Ste
p
8：
Step 7: Attach Middle Shelf (C), Oblique Stay Bar (D) to Top
Plate (A), insert Screw of D into montant of A, and tighten them
with 2pcs of Flat Washer (S), Spring Washer (T) and Nut (V) by
Wrench (W), as Fig 7.1
Attach Middle Shelf (C) to Top Plate (A) with 4pcs of Bolt (N),
Flat Washer (S), Spring Washer (T) and Nut (V) by Wrench (W).
Step 8: Attach Top Shelf (B) to Top Plat (A) with
2pcs Bolt (N), Flat Washer (S), Spring Washer (T)
and Nut (V) by Wrench (W).
Ste
p
7：
Care & Maintenance:
Our steel components for garden accessories and furniture are treated with rust inhibiting paint that
protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once
these protective coatings are scratched. This is not a defect and thus not covered by the warranty.
To minimize this condition, we recommend care when assembling & handling the product to prevent scratching
the paint. Should any scratching or damage occur, we recommend immediate touch-up with
rust inhibiting paint.
Surface rust can also be easily removed with a very light application of common cooking oil. If surface oxidation
(rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping onto deck or patio and
caused damaging stains, which may be difficult to remove. This can be prevented if the above-mentioned
measures are taken to keep the product from oxidizing.
Limited Manufacturer’s Warranty:
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of
your item provided the item is maintained with care and used only for personal, residential purposes.
The item is warranted to be free from defects in material or workmanship for a period of One (1) Year. We
don't reimburse for transportation or delivery costs, or compensate the individual or any outside party for
assembling or disassembling the product.
Exclusions:
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature,
vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof
of purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is
non-transferable. Any replacement of warranted items will be in the original style and color, or a similar style and
color if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations
on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific
rights, and you may also have other rights, which vary from state to state.
Made in China
Table of contents
Other Sunjoy Rack & Stand manuals
