Sunwoda SWD-007 User manual

Little Strawber r y
Bluetooth Keyboard
Speciation
Model No.:SWD-007
Address:No.2,Yihe Rd.,Shilong Community,Shiyan Street,Baoan District,Shenzhen,China

TPU keyboard button
USB battery charge interface
Toggle power switch
Switch to code
Power indicator
Caps lock indicator
Bluetooth search/
connection indicator
Audible feedback indicator
Touch panel
Know about the keyboard

Set up the keyboard
1.Turn ON the power switch
The Bluetooth will be in search automatically, the light is off when
the keyboard is connected. If it is failed to search the paired device
in 5 minutes, the light will be off.
2.Please ensure the Bluetooth function of the paired deviceis opened .
Please choose:Set up—General—Bluetooth –Open
3. Choose “Bluetooth 3.0 keyboard” in menu
4. Enter in PIN code
If the paired device request to enter in the PIN code, please press the
button on bluetooth keyboard. The Bluetooth indicator light is turn
blue when the keyboard is connected, then off.

Charging for keyboard
1.Use the Micro USB to connect the keyboard and power source, the power
indicator light will be flashing in red.
2. The power indicator light will stay lit once it is fully charged.

Use your WIN8
Key function description
Return to the main interface of the paired device.
Sound off
Turn down the volume
Turn up the volume
Pause/Play
Start the search function
Sharing
Connect the other device via paired device
Set up the windows
Special shortcuts
10. Slide the mouse = Single refers to the sliding inside
11. Page turning = Two fingers slide to a direction
12. View the properties: three fingers touch the panel together
13. “FN” +”Space” = Turn on/off the back light of keyboard, 4 different brightness
levels can be chosen to make the back light fit the working environment well.
14. “FN” + “>” = Turn on/off the audible feedback indicator
15. “FN” + “B” = Show battery level

Protect the keyboard
Please use the keyboard properly
1. Please keep the keyboard away from the sharp tool
2. Connect the keyboard and device successfully
3. Please do not put the heave thing on the keyboard
4. Please do not put the keyboard in the Microwave oven
5. Please do not use the keyboard to beat other things
6. Please keep the keyboard away from the oils or corrosive chemicals
7. Please do not put the keyboard into the water
8. Please keep the keyboard full of energy.
Status indicator lamp description
Indicator Description
The power light flicker in turn In charging state
The power light flicker in warning Please charge the battery asap, the battery is
running low.
The Blue indicator light is twinkling
Twinkle quickly: the keyboard is in searching state
Twinkle slowly: the keyboard is trying to re-connect
paired device
The Bluetooth indicator twinkle
normally
Pairing successfully
Use your WIN8

FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.