Tecknet X500-V2 K User manual

TeckNet X500-V2 Keyboard

Welcome
Thank you for choosing this TECKNET product. To ensure optimum
performance and safety, please read these instructions carefully before
operating this product. It is strongly recommended you keep this manual
for future reference. Num Indicator
Product Layout Caps Indicator
Low Power Indicator
Touch Pad
Left Mouse Key Right Mouse Key
Power Switch
SKU: X500
BULK : HSP331
www.tecknet.co.uk
Made i n C hin a
Manufacturer's SKU:HW155
Package Contents
1 x TeckNet X500-V2 Keyboard
1 x Nano Receiver
1 x User Manual
1 x Warranty Card
1

Product Specifications
1. Battery Type: 2 AAA batteries
2. Modulation System: GFSK
3. Multimedia functions.
4. USB 2.0 interface, plug & play, no driver required.
5. Compatible with Windows OS (Windows 98, 2000, XP, Vista,
WIN7, WIN8, Win10).
6. Operating Voltage: 1.8-3.0V.
7. Operating Current: 10mA.
8. Sleeping Current: 0.2mA
9. Keystroke Force: 60±20g.
10. Key Life: 3 million keystrokes
11.Dimension: 366.5 x 121.3 x 18.35mm
12. Touchpad Size: 74.6 x 89.6mm
13. Weight: 271g
Keyboard Instructions
Shortcut Keys
FN + F1
Play/Pause
FN + F2
Previous
FN + F3
Next
FN + F4
Vol+
FN + F5
Vol-
FN + F6
Mute
FN + F7
Internet
FN + F8
Search
FN + F9
Favorite
FN + F10
Insert
FN + F11
Mum Lock
FN + F12
Print Screen
FN +
Top Line
FN +
Last Page
FN +
Next Page
FN +
End Page
Note: "FN"+"F9" Favorite is not for Win10
2

Touchpad for PC
Change to next
Program
Show menu
Three fingers slide up
3

Touchpad for Android
Battery Installation
The X500-V2 wireless keyboard uses two AAA batteries (not included). Open the
battery compartment cover, take out the Nano receiver. Install the batteries into
the compartment, and make sure the polarity of the batteries is correct. The
positive (+) and negative (-) ends of each battery must match the positive (+) and
negative (-) markings in the battery housing.
LED Indicator
Num Indicator: Press "FN" +"F11", LED will turn blue. Press "FN"
+"F11" again, LED will turn off.
Caps Lock Indicator: Press "Caps Lock" key, LED will turn blue. Press
again, LED will turn off.
Power Indictor: LED will show red color then turns off when the keyboard turns
on.LED will turn red and flash if the battery is lower than 2.1V.
4

Pairing Method
Make sure the distance between the keyboard and the PC is within 3M.
Plug the Nano receiver into USB port of the PC and turn on the keyboard.
The blue "Power" LED will be on and red "Power" LED will flash for 1-2
seconds and turn off. Now the pairing is successful.
Note: If the red indicator only flashes one time then turns off, the pairing
is unsuccessful. Press "Esc" + "K" to re-connect.
Numeric Zone
Press the "Num Lock" button, the LED of "Num" will turn on. Letter "M",
"J", "K", "L", "U", "I", "O" are changed to numeric 1, 2, 3, 4, 5, 6, 7, 8, 9.
Press "FN" + "F11" again, the LED of "Num" will turn off. Numeric 1, 2, 3,
4, 5, 6, 7, 8, 9 are changed to letter "M", "J", "K", "L", "U", "I", "O".
Energy Saving Mode
1.When the keyboard is not used for 10 minutes, it will enter dormant.
Press any key to active.
2.Press and hold any key for 2 minutes, the keyboard will enter
dormant. Press any key to active.
IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW
THESE INSTRUCTIONS.
1.SAVE THESE INSTRUCTIONS - This sheet contains important safety
and operating instructions.
2.Before using the product, read all instructions and caution markings on
the product, accessories and device using our product.
3.This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
4.Children should be supervised to ensure that they do not play with
the appliance.
5.Keep the product away from fire or explosion may occur.
6.For indoor use only. Do not expose to rain, water, excess moisture or snow. 7.Do
not place product in or near inflammable, explosive or hazardous object. 8.Do not
place in or near water, rain, excess moisture or extreme heat.
9.Do not operate product with damaged cord or plug.
10.Do not operate product if it has been damaged in any way.
11.Do not disassemble the product. Disassembly may result in a risk of safety
hazards. 5

12.Do not throw or shake the product
13.To reduce the risk of electric shock, unplug the product from the
power supply when not in use or switch off the power supply
Limited 18-Month Warranty:
What this warranty covers.
Shenzhen Unchain Technology Co., LTD. (Manufacturer: “Unchain”) warrants
to the original purchaser of this TeckNet product that the product shall be free
of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Unchain warrants the TeckNet product for 18 Months.
What will we do to correct problems?
Unchain will repair or replace, at its option, any defective product free
of charge (except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the TeckNet product is not
provided to Unchain for inspection upon Unchain’s request at the sole
expense of the purchaser, or if Unchain determines that the TeckNet
product has been improperly installed, altered in any way, or tampered
with. The TeckNet Product Warranty does not protect against acts of God
such as flood, earthquake, lightning, war, vandalism, theft, normal-use
wear and tear, erosion, depletion, obsolescence, abuse, damage due to
low voltage disturbances (i.e. brownouts or sags), non-authorized
program, or system equipment modification or alteration.
How to claim the warranty
Please contact retailers or visit TeckNet website www.tecknet.co.uk for
more information
Disclaimer
Every effort has been made to ensure that the information and procedures
in this guide are accurate and complete, no liability can be accepted for
any errors or omissions and we reserve the right to make any changes
without further notice to any products mentioned herein.
Warranty
We warrant that products purchased from authorized distributors will
meet the applicable product specifications and be free from all defects in
design, assembly, materials and workmanship. Please contact retailers
or visit our website www.tecknet.co.uk for more information.
6

TeckNet
P.O. BOX
122 Liverpool
L9 7WQ
www.tecknet.co.uk