SuperATV Polaris RZR User manual

Item Description Qty
A Fairlead Plate 1
B Mounting Bracket (Passenger Side) 1
C Mounting Bracket (Driver Side) 1
D M10-1.50 x 20mm Lg. HHCS 2
E M10-1.50 x 20mm Lg. SHCS 2
F M8-1.25 x 20mm Lg. HHCS 4
G M8-1.25 Nylock Nuts 4
A
D
E
F
G
B C
© 2010 SuperATV.com. All Rights Reserved. REV IN-WM-P-RZR 9/7/2012
Polaris RZR, Winch Mount Plate
INSTALLATION INSTRUCTIONS
740B Clifty Drive • Madison, Indiana 47250 • 812-574-7777
Liability Statement
SuperATV’s products are designed to best t users ATV/UTV under stock conditions.
Adding, modifying, or fabricating any factory, or aftermarket, parts will void any
warranty provided by SuperATV and is not recommended. SuperATV’s products
could interfere with other aftermarket accessories. If user has aftermarket products
on machine, contact SuperATV to verify that they will work together.
Although SuperATV has thousands of satised customers, user should be aware
that installing lift kits, long travel, or suspension kits, tires, etc will change the ride
of machine and may increase maintenance and part wear. Operating any off-road
machine while, or after, consuming alcohol and/or drugs increases risk of bodily
harm or death. No warranty or representation is made as to this product’s ability to
protect user from severe injury or death. SuperATV urges operators and occupants
to wear a helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV products, user agrees that should damages
occur, SuperATV will not be held responsible for loss of time, use, labor fees,
replacement parts, or freight charges. SuperATV, nor any 3rd party, will not be held
responsible for any direct, indirect, incidental, special, or consequential damages
that result from any product purchased from SuperATV. The total liability of seller to
user for all damages, losses, and causes of action, if any, shall not exceed the total
purchase price paid for the product that gave rise to the claim.
SuperATV will warranty only parts provided by SuperATV. Any damage or problems
with OEM housings, bearings, seals, or other manufacturers products will not be
covered by SuperATV. SuperATV parts and products are not warrantied if item was
not installed properly, misused, or modied.
Read instructions and view illustrations before beginning.
Need help with your installation?
1-812-574-7777
[e-mail] www.superatv.com
8:00am - 9:00pm EST M-Th
8:00am - 7:00pm EST Friday
9:00am - 2:00pm EST Saturday
Thank You
For Choosing
Fairlead included with Winch.
Rope type determines style.
Synthetic
Steel

Mounting Bracket, rear, Locations
Fig. 1
Do not tighten hardware completely unless noted.
1. Install rear of Mounting Brackets (B)(C) with M10-
1.50 x 20mm Lg. HHCS (D). See Fig. 1 and Fig.
2. Front of Mounting Brackets (B )(C) mount with
M10-1.50 x 20mm Lg. SHCS (E). See Fig. 3.
2. Install Fairlead Plate (A) with M8-1.25 x 20mm Lg.
HHCS (F) and M8-1.25 Nylock Nuts (G). See Fig.
4.
3. Tighten all hardware completely.
4. Install Winch and wire according to Winch
Instructions. To determine mounting location see
Winch Mounting.
Use Washers when Mounting Winch
4500 Lb. Winch Mounting 3500 Lb. Winch Mounting
Fig. 2
C
D
B
A F G
(Driver Side Shown)
A
E
F G
A
Fig. 4
E
B C
E
Fig. 3
Minor interference, between Winch and Radiator
Hose, may occur in some installations. Use Flex
Loom or applicable material to prevent.
Winch
Hose
(View from Passenger Side)