SureShot 556 HOT SHOT User manual

556
ASSEMBLY INSTRUCTIONS
HOT SHOT
YOUR BEST SHOT ! WARNING !!!
To be assembled and dismantled by an adult
must always be used in presence of an adult
do not leave in the open in windy conditions.

PART LIST
P7 - 1Nos. Size 71x41x8Cms
P4 - Size 100Cmsx35mmx35mm - 1Nos.
P5 - Size 100Cmsx31mmx31mm - 1Nos.
P6 - Size 100Cmsx27mmx27mm - 1Nos.
P8 - Size 730x20x3mm - 2Nos. P9 - Size 520x25x6mm - 2Nos.
P3 - 1 Nos.
Net white - 12 Loops
P2 - 1Nos. Size 45Cmsx45Cmsx0.9mmP1- Size 90x59x1.5Cms
1Nos.
P10 - 2 Nos Size 1”x2½’’’ P11 - 1 Nos Size2½”x2½’’’ P12 -
2 Nos
Size1”x2’’’ P13 - 2 Nos
Size1.5”x2’’’
P14 - Size 2’’’x2½’’’ - 2Nos.

STEP -1
Fill the Blast (P7)
with sand or water
STEP -2
Attach spring
loaded pole (P4)
with base (P7)
and tighten the
tightening
screw
attached
with base.
STEP -3
Attach support steel strip (P8)
with base (P7) using nut and
bolt (P10) and the same time
attach upper part with pole
(P4) using nut & bolt (P11)
and tighten it with the help
of two spanner (P14).
STEP -4
Attach spring loaded pole (P5)
with pole (P4) and tighten
the tightening screw
attached with pole (P4).

STEP -5
Attach support strip
(P9) with basketball
board (P1) using nut
& bolt (P12) and
tighten it with the
help of spanner (P14).
STEP -6
Attach ring (P2) and board (P1)
with pole (P6) and support
strip (P9) using nut & bolt (P13)
and tighten it with the help of
two spanner (P14)
STEP -7
Attach net (P3) loops with ring (P2)
Sure Shot Netball Equipment is distributed in the United Kingdom by
Ransome Sporting Goods.
Wood Street, Middlesbrough TSL 1JP, Telephone: [phone].
E-mail: [email protected].
Attach pole (P6) attached with
ring and net with pole (P5) and
tighten the tightening screw
attached with pole (P5)
STEP -8