Swisher PowerBlade PBM-8510 User manual

1. Remove the hardware from the mounting plate.
2. Place the mounting plate up under the bike frame with the rear stop in front of,
and in between the frame bars as shown on figure 1
3. Place the U Bolts over the frame and snug in place.
4. Place the front channel over the frame and attach the hardware as shown.
5. Center the plate with the sides and tighten all hardware
ATV MOUNT KIT PBM-8510
Un-package and familiarize yourself with the contents.
12022 Rev.
1-800-222-8183
Figure 1 Shown with partial Frame

1
2
3
4
4
3
6
Item Description Part No.
1 Mounting Plate 12596TK
2 Mount Channel 12630TK
3 5/18-18 Nylock Nut NB181
4 5/16 Washer NB275
5 "U" Bolt Square 7873Z
6 Bolt 5/16-18X2 1/4Gr 5 NB622
7 Pin -Clevis 10305
8 Pin - Hair NB724
5
8
7