Swisher PowerBlade PBA-6560 User manual

ATV MOUNT KIT PBA-6560
Un-package and familiarize yourself with the contents.
1. Remove plastic engine skid plate and retain for use when mount kit is removed
from the ATV.
2. Place the 2 U bolts over the main frame tubes just ahead of the footrests loosely
attach the mount plate to the front U bolts with the 3/8 Nylock nuts and washers
provided.
3. Raise the rear of the mount plate up to the main frame tubes and place the 2
rear U bolts over the frame tubes in this position, guide the 2 rear U bolts through the
mount plate and loosely attach it to the U bolts with the 5/16 Nylocks and washers
provided.
4. Center and square the mount plate and securely tighten all hardware.
1-877-627-5860
12463 REV.

1
2
3
4
5
6
7
8
9
Item Description Part No.
1 U-Bolt - Small NB720
2 5/16 Washer NB275
3 5/16-18 Nylock Nut NB181
4 U-Bolt - Large 12447
5 3/8 Washer NB272
6 3/8-16 Nylock Nut NB182
7 Hair Pin NB127
8 Clevis Pin 10305
9 Mount Plate NA