Symphony SYM-404 Manual

© 2022
Order #XXXXX
Locked layer contains
placeholder marks.
Upper Legs
Assemble unit upside-down.
Item
--
--
--
--
--
--
Qty.
2
2
1
1
1
1
Description
17.25”h aluminum Leg (lower)
18.5”h aluminum Leg (upper)
36.5”h aluminum Leg (middle)
43”w x 21.5”d Counter Base
17.95”w x 17.92”d Counter Shelf
43”w x 21.5”d Counter Top
Steps:
Note: Assemble counter upside-down.
1) Attach upper legs to underside of Counter Top. Twist to tighten.
2) Connect lower Legs through Counter Shelf to upper Legs, as shown.
3) Attach middle leg to underside of Counter Top. Twist to tighten.
Note: Holes for standoff graphic should face front of assembly.
4) Place Counter Base over lower & middle Legs & secure with screw caps.
5) Turn counter unit over & attach Graphic to middle leg, using Clamps w/ Velcro.
When assembled
Counter Top
Shelf
Counter Base
screw
caps
Lower Legs
Middle Leg
Clamp
w/ Velcro
Clamp
Clamp
w/ Velcro
Graphic
Clamp
w/ Velcro
*
*
*
Velcro
If you would like to tell us about your experience with your setup instructions please email us at [email protected]
SETUP INSTRUCTIONS
SYM-404 Portable Counter
REV 1/2023

© 2022
Order #XXXXX
General Setup Instructions
- Read entire setup instruction manual prior to
unpacking parts and pieces.
- The setup instructions are created specifically
for this configuration.
- Setup instructions are laid out sequentially in
steps, including exploded views with detailed
explanation for assembly.
Cleaning & Packing
- For Cleaning Metal, Plex, & Laminate Parts:
Use a MILD NON-ABRASIVE cleanser and
soft cloth/paper towel to clean all surfaces.
- Keep exhibit components away from heat
and prolonged sun exposure.
Heat and UV exposure will warp and
fade components.
- Retain all provided Packing Materials.
All provided packing materials are for
ease of repacking & component protection.
Disassembly
- For loss prevention, keep all
knobs & connectors attached to
extrusions during disassembly.
Part Identification - Numbering
7A
Engaged Lock
DO NOT USE POWER TOOLS
ALL CONNECTIONS MUST
BE TIGHTLY SECURED
WARNING
General Information

© 2022
Case 1 of 1
Order #XXXXX
Locked layer contains
placeholder marks.
Top View of Each Level
Level 1
(Bottom level)
Level 2 Level 3 Level 4
Counter
Top
Floor
Shelf
Upper
Legs
Lower
Legs
Middle
Leg
Counter
Graphic Setup Hardware
Case Packing