TDT MF1 User manual

Fast Facts
Configuring the MF1 for Closed Field Operation
Important: Closed Field Adapter, Tip, and CF Line Filter used only for Closed Field Configuration!
Ensure Black O-ring is in place on
back of CF Adapter, as shown.
Attach the CF Adapter to the front
of the speaker using three of the
provided 1/4 x 4-40 hex screws.
1.
2.
3.
4.
Front of Speaker Back of CF Adapter
Speaker with CF Adapter
3mm Tube Tip
Groove for Tip
Back of Speaker
(shown with included stand)
Holes for Hex Screws Black O-ring
Blue O-ring
CF Line Filter
Amplifier Line In
For Closed Field Configuration Only
Ensure the blue O-ring is in place at
the base of the tip, as shown.
Insert the tip into the groove on
the CF adapter. Ensure the tip is
bottomed in its socket.
Gently insert the tube into the narrow
end of the tip.
Attach the CF filter to the provided
RCA cable.
Attach a BNC to RCA adapter to the
BNC amplifier port of your source
device.
Connect the MF1 to the amplifier
using the RCA cable (with CF filter
attached).
See the System 3 Manual for more
information on the MF1 Speaker.

[email protected]
www.tdt.com
MF1 Closed Field Speaker Assembly Diagram
CF Adapter
*
Stand (attached with thumb screw)
Speaker Hex Screws
*
Tip
*
CF Line Filter
*
Blue O-ring
*
Black O-ring
*
Amplifier Line In
*Important: Closed Field Adapter, Tips, and CF Line Filter used only for Closed Field Configuration!
Free Field Configuration Closed Field Configuration WRONG - DO NOT USE
Remove CF Adapter for Free Field Use or Add Tip for Closed Field Use.
WRONG