TECH RAMPS QUARTERPIPE User manual

QUARTERPIPE
w w w . t e c h r a m p s . c o m
ASSEMBLY
INSTRUCTION

-a screwdriver
-a box spanner 17
Dear customer!
We are glad that you've decided to buy our product.
Before you will start using the obstacle, please read this manual thoroughly. It should be carefully stored and in case of
giving the obstacle to a new owner it also should be given to him/her.
The manufacturer/importer shall not be liable in the case of using the obstacle in the wrong way.
necessary tools
To assembly the obstacle you will need:
1
w w w . t e c h r a m p s . c o m
assembly
To avoid the top layer's damage you should conduct the installation process on clean, soft surface, for example on a
cartoon. Particular elements should not be connected together at a push.
If something does not fit to another element, it may mean that you are trying to connect two wrong elements. Make
sure that you are trying to connect together correct modules.
maintenance
The obstacle does not have to be painted nor persevered, because it is made of waterproof plywood. From time to
time you can impregnate it. Remember to use only small amount of paint on the rideable surface, to keep it tacky.
warranty
Techramps's goal is building a long-term relationship with its customers. Our company guarantees that every our
obstacle is top quality and within 1 year of normal usage it won't break.

1. Bottom part of the structure 2 pcs.
2. Top part of the structure 2 pcs.
3. Connector 2 pcs.
4. Top layer 1 pcs.
5. Bars 1 2 pcs.
6. Rideable layer panels 3 pcs.
7. „ Co p p in g ” 1 pcs.
8. Bar under the overrun sheet metal 1 pcs.
9. Overrun sheet metal 1pcs.
10. Screws 5 x100 52 pcs.
11. Screws 5 x60 92 pcs.
12. Screws 5 x30 24 pcs.
13. Torx screwdriver tip - T 20,T 25
12
3
5
10
x2
x2
x2
x12
4
7
X52
X92
2
w w w . t e c h r a m p s . c o m
11
x2
x3
6
8
9
X24
contents of the set

3
2
1
Screw the connector to side panels (5x 30 screws )
Screw all wooden bars ( 5 x 100 screws )
Mount copping and top plate (5 x60 screws)
assembly
3
w w w . t e c h r a m p s . c o m

5
Mount rideable layer panels ( 5 x 6 0 screws).
You will need another person who will push hardly panels to create a
"bow" shape.
assembly
4
4
w w w . t e c h r a m p s . c o m
Mount the overrun metal sheet (5x 30 screws)
Read thenext page of the manual and TEST THE OBSTACLE.

1. The obstacle is dedicated only for rollerblades, skateboards and BMXs
2. Every user should wear a helmet and a set of protectors
3. At one time only one person can use the obstacle
4. Who should not use the obstacle:
-injured people
-people with motor system diseases
-people with hearth diseases
-people with epilepsy
-pregnant women
5. Remember about respecting the safert area. Place the obstacle at least 2 meters
from the closest objects.
6. The minimum safe overrun and landing distance is 5 meters.
7. Always be careful!
safety and user's manual
5
w w w . t e c h r a m p s . c o m

w w w . t e c h r a m p s . c o m
TECHRAMPS UL.ORGANKI 2, 31-990 KRAKÓW
`