Teltonika FM1120 User manual

FM1120 User Manual
V4.4
*This version is suitable for device with universal FM11YX firmware
base v.01.17.xx

2
Table of contents
1INTRODUCTION ..................................................................................................................... 6
1.1 ATTENTION............................................................................................................................ 6
1.2 INSTRUCTIONS OF SAFETY ......................................................................................................... 6
1.3 LEGAL NOTICE........................................................................................................................ 7
1.4 ABOUT DOCUMENT ................................................................................................................. 7
2BASIC DESCRIPTION ............................................................................................................... 7
2.1 PACKAGE CONTENTS ................................................................................................................ 7
2.2 BASIC CHARACTERISTICS ........................................................................................................... 7
2.3 TECHNICAL FEATURES............................................................................................................... 9
2.4 TECHNICAL INFORMATION ABOUT INTERNAL BATTERY................................................................... 10
2.5 ELECTRICAL CHARACTERISTICS.................................................................................................. 10
2.6ABSOLUTE MAXIMUM RATINGS............................................................................................... 11
3CONNECTION, PINOUT, ACCESSORIES.................................................................................. 12
3.1 HOW TO INSERT SIM CARD INTO FM1120 DEVICE: .................................................................... 12
3.2 INSTALLING FM1120 DRIVERS ................................................................................................ 13
3.3 NAVIGATE LED..................................................................................................................... 15
3.4 STATUS LED ........................................................................................................................ 15
3.5 SOCKET 25........................................................................................................................ 15
3.6 USB................................................................................................................................... 16
3.7 ACCESSORIES........................................................................................................................ 17
4FIRMWARE .......................................................................................................................... 20
4.1 UPDATING FIRMWARE USING USB CABLE .................................................................................. 20
5OPERATIONAL BASICS.......................................................................................................... 21
5.1 OPERATIONAL PRINCIPALS....................................................................................................... 21
5.2 SLEEP MODES....................................................................................................................... 22
5.2.1 Sleep mode ............................................................................................................. 22
5.2.2 Deep Sleep mode .................................................................................................... 22
5.3 VIRTUAL ODOMETER.............................................................................................................. 23
5.4 FEATURES............................................................................................................................ 23
5.4.1 Scenarios ................................................................................................................ 23
5.4.2 Trip.......................................................................................................................... 24
5.4.3 Geofencing.............................................................................................................. 24
5.4.4 iButton list .............................................................................................................. 24
5.5 CONFIGURATION.............................................................................................................. 25
5.6 CONFIGURATOR.................................................................................................................... 25
5.7 RECORD STORAGE ................................................................................................................. 27
5.8 SYSTEM SETTINGS.................................................................................................................. 27
5.9 RECORDS SETTINGS................................................................................................................ 29
5.10 GSM SETTINGS,GPRS PART................................................................................................... 29
5.11 GSM SETTINGS,SMS PART .................................................................................................... 29
5.12 DATA ACQUISITION MODE SETTINGS ........................................................................................ 31
5.13 FEATURES SETTINGS............................................................................................................... 36
5.13.1 Scenarios settings ................................................................................................... 36
5.13.2 Trip settings ............................................................................................................ 37
5.13.3 Geofencing settings ................................................................................................ 38
5.13.4 SMS events ............................................................................................................. 40
5.13.4.1 SMS events configuration ................................................................................................ 42
5.14 I/O SETTINGS ....................................................................................................................... 45
5.14.1 Monitoring.............................................................................................................. 48
5.14.2 Event Generating.................................................................................................... 48
5.14.3 Hysteresis ............................................................................................................... 49

3
6SMS COMMAND LIST ........................................................................................................... 49
6.1 SMS COMMAND LIST............................................................................................................. 50
6.1.1 getstatus................................................................................................................. 50
6.1.2 getweektime........................................................................................................... 51
6.1.3 getops..................................................................................................................... 51
6.1.4 getcfgtime .............................................................................................................. 51
6.1.5 getgps..................................................................................................................... 51
6.1.6 ggps ........................................................................................................................ 52
6.1.7 getver ..................................................................................................................... 52
6.1.8 getinfo .................................................................................................................... 52
6.1.9 getio........................................................................................................................ 53
6.1.10 readio #................................................................................................................... 53
6.1.11 setdigout ## Y1 Y2 .................................................................................................. 53
6.1.12 getparam #### ....................................................................................................... 53
6.1.13 setparam ####........................................................................................................ 53
6.1.13. getparam 1271 X/212 X ......................................................................................... 53
6.1.14. setparam 1271 X/212 X .......................................................................................... 54
6.1.15 readops # ................................................................................................................ 54
6.1.16 flush #,#,#,#,#,#,# ................................................................................................... 54
6.1.17 sn # ......................................................................................................................... 54
6.1.18 banlist ..................................................................................................................... 54
6.1.19 crashlog .................................................................................................................. 55
6.1.20 lvcangetprog........................................................................................................... 55
6.1.21 lvcansetprog # ........................................................................................................ 55
6.1.22 lvcangetinfo............................................................................................................ 55
7DEBUG MODE ...................................................................................................................... 55
8PARAMETER LIST ................................................................................................................. 57
8.1 PARAMETERS VALUE TYPES...................................................................................................... 57
8.2 SYSTEM PARAMETERS ............................................................................................................ 57
8.2.1 Sleep Mode (ID=1000) ............................................................................................ 57
8.2.2 Sleep timeout (ID=200) ........................................................................................... 57
8.2.3 Analog Input value range (ID=1001) ...................................................................... 57
8.2.4 Stop Detection Source (ID=1002)............................................................................ 57
8.2.5 Static Navigation (ID=1003) ................................................................................... 58
8.2.6 Saving/Sending without time synchronization (ID=201) ........................................ 58
8.2.7 GNSS System (ID=202) ............................................................................................ 58
8.2.8 Ignition source (ID=1004) ....................................................................................... 58
8.2.9 Power Voltage High Level (ID=1005) ...................................................................... 58
8.2.10 Power Voltage Low Level (ID=1006) ....................................................................... 58
8.3 RECORDS PARAMETERS .......................................................................................................... 59
8.3.1 Sorting (ID=1010) ................................................................................................... 59
8.3.2 Active Data Link Timeout (ID=1011)....................................................................... 59
8.3.3 Server Response Timeout (ID=1012)....................................................................... 59
8.4 GSM PARAMETERS ............................................................................................................... 60
8.4.1 GPRS content activation (ID=1240) ........................................................................ 60
8.4.2 APN Name (ID=1242).............................................................................................. 60
8.4.3 APN username (ID=1243) ....................................................................................... 60
8.4.4 APN Password (ID=1244)........................................................................................ 60
8.4.5 Domain (ID=1245) .................................................................................................. 60
8.4.6 Target Server Port (ID=1246).................................................................................. 60
8.4.7 Protocol (ID=1247).................................................................................................. 61
8.4.8 SMS Login (ID=1252) .............................................................................................. 61
8.4.9 SMS Password (ID=1253)........................................................................................ 61
8.4.10 SMS data sending settings (ID=1250)..................................................................... 61
8.4.11 SMS Data send week time schedule (ID=1273) ...................................................... 61
8.4.12 Authorized phone numbers (ID=1260-1270) .......................................................... 61

4
8.4.13 SMS Event PreDefined Numbers (ID=150-159)....................................................... 62
8.4.14 Operator List (ID=1271 X) ....................................................................................... 62
8.5 DATA ACQUISITION MODES PARAMETERS.................................................................................. 62
8.5.1 Home Network GSM operator code “Vehicle on STOP” parameters ...................... 62
8.5.1.1 Min Period (ID=1540) ......................................................................................................... 62
8.5.1.2 Min Saved Records (ID=1543) ............................................................................................ 62
8.5.1.3 Send Period (ID=1544) ....................................................................................................... 63
8.5.1.4 GPRS Week Time (ID=1545) ............................................................................................... 63
8.5.2 Home Network GSM operator code “Vehicle MOVING” parameters ..................... 63
8.5.2.1 Min Period (ID=1550) ......................................................................................................... 63
8.5.2.2 Min Distance (ID=1551)...................................................................................................... 63
8.5.2.3 Min Angle (ID=1552) .......................................................................................................... 64
8.5.2.4 Min Speed (ID=1556).......................................................................................................... 64
8.5.2.5 Min Speed Source (ID=1557).............................................................................................. 64
8.5.2.6 Min Saved Records (ID=1553) ............................................................................................ 64
8.5.2.7 Send Period (ID=1554) ....................................................................................................... 65
8.5.2.8 GPRS Week Time (ID=1555) ............................................................................................... 65
8.5.3 Roaming Network GSM operator code “Vehicle on STOP” parameters ................. 65
8.5.3.1 Min Period (ID=1560) ......................................................................................................... 65
8.5.3.2 Min Saved Records (ID=1563) ............................................................................................ 65
8.5.3.3 Send Period (ID=1564) ....................................................................................................... 65
8.5.3.4 GPRS Week Time (ID=1565) ............................................................................................... 65
8.5.4 Roaming Network GSM operator code “Vehicle MOVING” parameters ................ 65
8.5.4.1 Min Period (ID=1570) ......................................................................................................... 65
8.5.4.2 Min Distance (ID=1571)...................................................................................................... 66
8.5.4.3 Min Angle (ID=1572) .......................................................................................................... 66
8.5.4.4 Min Speed (ID=1576).......................................................................................................... 66
8.5.4.5 Min Speed Source (ID=1577).............................................................................................. 66
8.5.4.6 Min Saved Records (ID=1573) ............................................................................................ 66
8.5.4.7 Send Period (ID=1574) ....................................................................................................... 67
8.5.4.8 GPRS Week Time (ID=1575) ............................................................................................... 67
8.5.5 Unknown Network GSM operator code “Vehicle on STOP” parameters ................ 67
8.5.5.1 Min Period (ID=1580) ......................................................................................................... 67
8.5.5.2 Min Saved Records (ID=1583) ............................................................................................ 67
8.5.5.3 Send Period (ID=1584) ....................................................................................................... 67
8.5.5.4 GPRS Week Time (ID=1585) ............................................................................................... 67
8.5.6 Unknown Network GSM operator code “Vehicle MOVING” parameters ............... 67
8.5.6.1 Min Period (ID=1590) ......................................................................................................... 67
8.5.6.2 Min Distance (ID=1591)...................................................................................................... 68
8.5.6.3 Min Angle (ID=1592) .......................................................................................................... 68
8.5.6.4 Min Speed (ID=1596).......................................................................................................... 68
8.5.6.5 Min Speed Source (ID=1597).............................................................................................. 68
8.5.6.6 Min Saved Records (ID=1593) ............................................................................................ 69
8.5.6.7 Send Period (ID=1594) ....................................................................................................... 69
8.5.6.8 GPRS Week Time (ID=1595) ............................................................................................... 69
8.6 FEATURES PARAMETERS ......................................................................................................... 69
8.6.1 Digital Output No.1 usage scenarios (ID=1600) ..................................................... 69
8.6.1 Max Acceleration Force (ID=1602) ......................................................................... 69
8.6.2 Max Braking Force (ID=1603) ................................................................................. 69
8.6.3 Max Cornering Force (ID=1604) ............................................................................. 70
8.6.4 Max allowed Speed (ID=1605)................................................................................ 70
8.6.5 Digital Output No.2 usage scenarios (ID=1601) ..................................................... 70
8.6.6 Trip (ID=1280)......................................................................................................... 70
8.6.7 Start Speed (ID=1281)............................................................................................. 70
8.6.8 Ignition Off Timeout (ID=1282)............................................................................... 70
8.6.9 Trip Continuous distance counting (ID=1283) ........................................................ 71
8.6.10 Geofencing.............................................................................................................. 71
8.6.10.1 Frame border (ID=1020)................................................................................................... 71
8.6.10.2 Geofence Zone #1 Shape (ID=1030) ................................................................................. 71
8.6.10.3 Geofence Zone #1 Priority (ID=1031) ............................................................................... 71
8.6.10.4 Geofence Zone #1 Generate Event (ID=1032).................................................................. 71
8.6.10.5 Geofence Zone #1 Longitude (X1) (ID=1033) ................................................................... 72

5
8.6.10.6 Geofence Zone #1 Latitude (Y1) (ID=1034) ...................................................................... 72
8.6.10.7 Geofence Zone #1 Longitude (X2) (ID=1035) ................................................................... 72
8.6.10.8 Geofence Zone #1 Latitude (Y2) (ID=1036) ...................................................................... 72
8.6.11 AutoGeofencing...................................................................................................... 73
8.6.11.1 Enable/Disable (ID=1101)................................................................................................. 73
8.6.11.2 Activation Timeout (ID=1102) .......................................................................................... 73
8.6.11.3 Deactivate by (ID=1100)................................................................................................... 73
8.6.11.4 AutoGeofence event Priority (ID=1103)........................................................................... 73
8.6.11.5 AutoGeofence event generating (ID=1104) ..................................................................... 73
8.6.11.6 Radius (ID=1105) .............................................................................................................. 73
8.6.12 iButton List (ID=1610-1659).................................................................................... 73
8.7 I/O PARAMETERS.................................................................................................................. 74
8.7.1 I/O#1 property parameter (ID=1300) ..................................................................... 74
8.7.2 I/O#1 priority (ID=1301) ......................................................................................... 74
8.7.3 I/O#1 High level (ID=1302) ..................................................................................... 74
8.7.4 I/O#1 Low level (ID=1303) ...................................................................................... 74
8.7.5 I/O#1 logic operand (ID=1304) ............................................................................... 75
8.7.6 I/O#1 averaging length (ID=1305).......................................................................... 75
8.8 SMS EVENT CONFIGURATION .................................................................................................. 77
8.8.1 I/O#1 element SMS event configuration (ID=100).................................................. 77
9FM1120 WITH LIGHT VEHICLES CAN ADAPTER LV-CAN200................................................... 78
9.1 PURPOSE OF LIGHT VEHICLES CAN ADAPTER LV-CAN200............................................................ 78
9.2 LV-CAN200 PROGRAM NUMBER SELECTION ............................................................................. 79
9.2.1 LV-CAN200 program number configuration via SMS command ............................ 79
9.2.2 Selecting LV-CAN200 program number manually .................................................. 79
9.3 CONNECTING FM1120 WITH LIGHT VEHICLES CAN ADAPTER........................................................ 80
9.4 FM11 CONFIGURATION......................................................................................................... 81
PARAMETERS ID................................................................................................................................ 82
9.5 SMS CONFIGURATION........................................................................................................... 83
9.6 CAN PROGRAM NUMBER REQUEST BY SMS .............................................................................. 84
9.7 GET LV-CAN INFO BY SMS .................................................................................................... 84
9.8 REFERENCES......................................................................................................................... 84
10 MOUNTING RECOMMENDATIONS .................................................................................. 85
10.1 CONNECTING WIRES.............................................................................................................. 85
10.2 CONNECTING POWER SOURCE................................................................................................. 85
10.3 CONNECTING IGNITION WIRE .................................................................................................. 85
10.4 CONNECTING GROUND WIRE .................................................................................................. 85
11 CHANGE LOG ................................................................................................................... 87

6
1INTRODUCTION
1.1 Attention
Do not disassemble the device. If the device is
damaged, the power supply cables are not isolated or
the isolation is damaged, before unplugging the power
supply, do not touch the device.
All wireless data transferring devices produce
interference that may affect other devices which are
placed nearby.
The device must be connected only by qualified
personnel.
The device must be firmly fastened in the predefined
location.
The programming must be performed using a second
class PC (with autonomic power supply).
The device is susceptible to water and humidity.
Any installation and/or handling during a lightning
storm are prohibited.
FM1120 has USB interface;
Please use cables provided with FM1120 device.
Teltonika is not responsible for any harm caused by
using wrong cables for PC <-> FM1120 connection.
1.2 Instructions of safety
This chapter contains information on how to operate FM1120 safely. By following these
requirements and recommendations, you will avoid dangerous situations. You must read these
instructions carefully and follow them strictly before operating the device!
The device uses a 10 V...30 V DC power supply. The nominal voltage is 12 V DC. The
allowed range of voltage is 10 V...30 V DC.
To avoid mechanical damage, it is advised to transport the FM1120 device in an impact-
proof package. Before usage, the device should be placed so that its LED indicators are visible,
which show the status of operation the device is in.
When connecting the connection (2x5) cables to the vehicle, the appropriate jumpers of
the power supply of the vehicle should be disconnected.
Before dismounting the device from the vehicle, the 2x5 connection must be disconnected.
The device is designed to be mounted in a zone of limited access, which is inaccessible for
the operator. All related devices must meet the requirements of standard EN 60950-1.
The device FM1120 is not designed as a navigational device for boats.

7
1.3 Legal Notice
Copyright  14 Teltonika. All rights reserved. Reproduction, transfer, distribution or
storage of part or all of the contents in this document in any form without the prior written
permission of Teltonika is prohibited.
Other products and company names mentioned here may be trademarks or trade names
of their respective owners.
The manufacturer reserves the right to make changes and/or improvements at any time in
design, functionality, parameters and electrical characteristics without any prior notice and
without incurring obligations.
1.4 About document
This document contains information about the architecture, possibilities, mechanical
characteristics, and configuration of the FM1120 device.
Acronyms and terms used in document
PC Personal Computer.
GPRS General Packet Radio Service
GPS Global Positioning System
GSM Global System for Mobile Communications
SMS Short Message Service
AC/DC Alternating Current/Direct Current
I/O Input/Output
Record AVL data stored in FM1120 memory. AVL data contains GPS and I/O information
AVL packet - data packet that is being sent to server during data transmission. AVL packet
contains from 1 to 50 records.
2BASIC DESCRIPTION
FM1120 is a terminal with GPS and GSM connectivity, which is able to determine the

applications, which need location acquirement of remote objects. It is important to mention that
FM1120 has additional inputs and outputs, which let you control and monitor other devices on
remote objects. FM1120 also has a USB port for device status log output and entering
configurations.
2.1 Package contents
1
The FM1120 device is supplied to the customer in a cardboard box containing all the
equipment that is necessary for operation. The package contains:
FM1120 device;
Input and output power supply cable with a 2x5 connection pins;
USB cable;
A card containing URL to download FM1120 device drivers and Configurator software.
170mAh Li-ion rechargeable 3,7V battery
2.2 Basic characteristics
GSM / GPRS features:
Teltonika TM11Q quad band module (GSM 850 / 900 / 1800 / 1900 MHz);
1
Package content depends on Order Code, and can be customized by customer needs.

8
GPRS class 10;
SMS (text, data).
GNSS features:
TG3300 32 channel (or equivalent) receiver;
Up to -161 dBm sensitivity.
Hardware features:
Cortex-M3 processor;
1 MB internal Flash memory;
Built-in accelerometer.
170mAh Li-ion rechargeable 3,7V battery
Interface features:

USB port;
3 digital inputs;
1 analog input;
2 open collector digital outputs;


LEDs indicating device status.
Special features:
Any element event triggers (external sensor, input, speed, temperature, etc.);
Highly configurable data acquisition and sending;
Multiple Geo-fence areas;
Sleep mode;
Deep sleep mode;
Configurable scenarios available;
Real-time process monitoring;
Authorized number list for remote access;
Firmware update over GPRS or USB port;
Configuration update over GPRS, SMS or USB port;
TCP/IP or UDP/IP protocol support;
3500 record storing.
Overvoltage protection (new devices with order code FM1120 Vxxxxx):
Description
Voltage
Duration
Normal operation
10-30V
Unlimited
Protection turns on, device turns off.
34V
Unlimited
Maximum voltage
<70V
Unlimited
Maximum voltage impulse
90V
5 mili seconds

9
2.3 Technical features
Part name
Physical specification
Technical details
Navigation LED
LED
Power supply 10...30 V DC
2W Max
Energy consumption1:
GPRS: 150 mA r.m.s Max.,
Nominal: average 65 mA r.m.s,
GPS Sleep: average 28 mA,
Deep Sleep: average less than
2 mA2
Battery charge current:
average 100 mA,
Operation temperature:
-
Storage temperature:
-
Storage relative humidity 5 ... 95 % (no
condensation)
Modem LED
LED
Socket 2x5
Tyco Micro MATE-N-
4-794628-0 or similar
USB
Mini USB socket
Table 1. FM1120 specifications
Figure 1 FM1120 view & dimensions (tolerance ±2mm)
1Energy consumption has been tested at 12V voltage with no battery charging.
2When in Deep Sleep mode no data storing and sending is activated.

10
2.4 Technical Information about internal battery
FM1120 internal battery is used for detecting external voltage disconnection.
Internal back-up battery
Battery voltage V
Nominal capacity (mAh)
Power(Wh)
Li-Polymer rechargeable
battery
3.75～3.90

0.64 - 0.66
2.5 Electrical characteristics
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
Supply Voltage:
Supply Voltage (Recommended Operating Conditions)
10
30
V
Digital Output (Open Drain grade):
Drain current (Digital Output OFF)
120
uA
Drain current (Digital Output ON,
Recommended Operating Conditions)
300
mA
Static Drain-Source resistance (Digital
Output ON)
300
mOhm
Digital Input:
Input resistance (DIN1, DIN2, DIN3)
15
kOhm
Input Voltage (Recommended Operating
Conditions)
0
Supply
voltage
V
Input Voltage threshold (DIN1)
7,5
V
Input Voltage threshold (DIN2, DIN3)
2,5
V
Analog Input:
Input Voltage (Recommended Operating
Conditions), Range1
0
10
V
Input resistance, Range1
120
kOhm
Measurement error
1,43
%
Additional error

mV
Input Voltage (Recommended Operating
Conditions) Range2
0
30
V
Input resistance, Range2
146,7
kOhm
Measurement error
1,75
%
Additional error

mV
Output Supply Voltage 1-Wire:3
3
1-wire Supply voltage PIN is dedicated for 1-wire devices ONLY, do not use it for any other purpose.